National Repository of Grey Literature 10 records found  Search took 0.00 seconds. 
The Accuracy of a Monofiber Optical Probe
Vejražka, Jiří ; Orvalho, Sandra ; Večeř, M. ; Sechet, P. ; Cartellier, A.
In this contribution, the accuracy of optical probe in a bubbly flow is deduced from high-speed imaging of bubble probe interaction. A dimensionless criterion useful for the estimation of the error of indicated void fraction is developed. It is also observed that the probe deformability may significantly decrease the probe accuracy.
Studie chování stgoupajících bublin v různých kapalinách
Smutná, K. ; Wichterle, K. ; Večeř, Marek
Experimental work dealing with influence of liquid properties on behavior of medium-sized ellipsoidal bubbles (equivalent diameter 4 – 10 mm) is submitted in the contribution. The ellipsoidal bubble exhibits periodical motion with characteristic nonlinear trajectory. Contexture of the horizontal motion and the bubble wobbling is a course for characteristic bubble orientation throughout rising – bubble turns to ambient flow with the maximum crosssection.
Validace optických sond-fikce a realita
Večeř, Marek ; Vejražka, Jiří ; Sechet, P. ; Orvalho, Sandra ; Růžička, Marek ; Cartellier, A. ; Drahoš, Jiří
This contribution deals with the dynamics of the penetration of the fine thin sharp tip of a optical fiber probe with the gas-liquid interface at a surface of a gas bubble freely moving in a liquid. Simple experiments were performed where the process under study was monitored with help of two independent sources of information, employed simultaneously.
Rheologie vodných nanosuspenzí
Večeř, Marek ; Tihon, Jaroslav ; Pěnkavová, Věra
Recent works have shown that suspensions of highly thermally conducting nanoparticles have great potential as a high-energy carrier for small flow channel systems. Information on the viscosity of nanofluids is needed for successful modeling of such flow systems.
Povaha toku modelových suspenzí
Kulaviak, Lukáš ; Večeř, Marek ; Růžička, Marek ; Drahoš, Jiří ; Hladil, Jindřich
The main object of the present investigation is to test the settling abilities of mixtures of solid particles in liquids. The key quantity here is the magnitude of the viscosity, both of the carrying liquid (water-glycerol solutions) and the effective viscosity of the two-phase mixture. Few model systems were used (glass and polystyrene pellets), to study the settling process. The sedimentation were recorded by a video camera and the resulting deposit structure was photographed. Besides, also a real suspension was tested, of geological materials (calcite, quartz, mixed geological powder, etc.). Immersion rotary viscometer Brookfield with special spindles (RVT and V spindles) was used to measure the effective viscosity of the dispersion.
Viskozitní charakteristiky geologických suspenzí
Kulaviak, Lukáš ; Večeř, Marek ; Růžička, Marek ; Drahoš, Jiří ; Hladil, Jindřich
The system under study was real geological suspension – ground sedimentary rocks of different chemical composition (calcite, quartz, etc.) dispersed in water-glycerol solutions. The reference one-phase system was a Newtonian liquid (glycerine with water). It is problematic to measure the rheology of settling suspensions, so some specific tools must be used. We used the rotating vane rheometry, with the immersion viscometer Brookfield and two spindles V-71 and V-72. The basic rheological data of solid-liquid system are displayed as flow and effective viscosity curves. The obtained results on rheology were related to the settling behaviour of the geological mixtures, namely to the certain kind of the lateral instability.
Optické sondy a jejich přesnost měření
Vejražka, Jiří ; Večeř, Marek ; Orvalho, Sandra ; Sechet, P. ; Cartellier, A.
The optical probes are commonly used for experimental measurements in gas-liquid multiphase systems. During the measurement, it is evaluated the intensity of the light, which reflects from the tip of the optical fiber placed in the measuring point. From the obtained signals, it is possible to evaluate the bubble residence time, local gas hold-up and it is possible to estimate the size and the velocity of the bubbles. In this study, the signal of the optical probe is compared with the data obtained by direct observation by high-speed camera. It was found that optical probe works well in the case of large and fast moving bubbles. In the case of small and slow bubbles the data measured by optical probe are not usable. The dimensionless criterion for minimal Weber number characterizing the reliability of the probe was derived on the base of motion equation for the bubbles.
Experimental Study of Ellipsoidal Bubble Trajectory.
Smutná, K. ; Wichterle, K. ; Večeř, Marek
Experimental work dealing with rising velocity and trajectory shape of medium-sized ellipsoidal bubbles (equivalent diameter 4 – 9 mm) is submitted in the contribution.
Shape of So-Called Ellipsoidal Bubbles Rising in a Liquid
Wichterle, K. ; Smutná, K. ; Večeř, Marek
Small bubbles have a spherical shape. Big bubbles are of an unstable shape. The shape of a big bubble resembles that of pulsating hemisphere with a flat or concave base. Relatively stable medium-sized bubbles are interesting in view of technical applications. The medium-sized bubbles have approximately a shape of an oblate ellipsoid. Shape of smaller bubbles in low viscosity liquids is determined by gravitational force and surface tension force. Eötvös number comprises of the gravitational and surface tension forces. Ellipsoidal shape is expected for 0,2 < Eo < 30. This corresponds to bubbles in water with bubble size 1 - 2000 mm3. Longstanding records of bubble motion made possible to evaluate bubble shape and shape oscillations. Volume of recorded bubbles was 10 to 800 mm3, water and glycerol solutions were used as liquids. A ratio of horizontal and vertical bubble size, given in literature, is correct in principle.
Koncové efekty v rotační viskometrii za přítomnosti zdánlivého skluzu
Wein, Ondřej ; Večeř, Marek ; Havlica, Jaromír
Common methods of treating primary data from rotational viscometry are tested using numerical simulations of primary circular flow of shear-thinning liquids in an actual sensor Z40 DIN according to ISO 3219 and a new KK (Morse-taper) sensor, suggested for rotational viscometry under slip effect. Theory of the sensors is presented, including the conversion of primary data into fluidity and slip viscometric material functions, as well as a statistical analysis of their relevance. The data treatment, based on the concept of local filtration, is illustrated on several aqueous solutions of Hercules CMC and Welan gum.

Interested in being notified about new results for this query?
Subscribe to the RSS feed.