|
|
Detached family house, Moravské Budějovice
Kuchařík, David ; Žižková, Lucie (referee) ; Müller, Jan (advisor)
This work deals with the design of a newly-built single-family house, which is located in the cadastral area of the town of Moravske Budejovice. It is a two-floor house without a basement, which is designed for a family of four. The house is detached. The vertical loadbearing structures are lined with ceramic blocks HELUZ, insulated by contact thermal insulation system from polystyrene plates. The building is covered with a shed roof with a slope of 7°. Garage is part of the house and has shed roof with a slope 5°.
|
|
|
Fibre reinforcement with plasma in cement composites
Žižková, Lucie ; Hela,, Rudofl (referee) ; Bodnárová, Lenka (advisor)
The usage of polymer fibres can be increased by the new progressive method of the plasma treatment. This thesis is focused on verification of the influence of the low-temperature treatment on polymer fibres´ surface used in concrete. The treatment of polypropylene fibres in low-temperature plasma is described in the theoretical part. The impact of the treatment on the volume differences of cement composites is also evaluated. The influence of the addition of commercially available fibres and plasma treated fibres on the volume differences of cement composites is also experimentally verified.
|
|
|
Detached family house, Zámrsky
Pavelka, Petr ; Žižková, Lucie (referee) ; Müller, Jan (advisor)
This work deals with the design of a newly-built single-family house, which is located in the cadastral area of the village of Zámrsky. It is a two-floor house without a basement with garage, which is designed for a family of four. The house is detached. The vertical loadbearing structures are lined with clay brick Porotherm, insulated by contact thermal insulation system from polystyrene plates. Floor structure is made of clay system Porotherm. The building is covered with a gable roof with a slope of 20° and gabled dormers on the north and south side. Garage is covered with a mono-pitched roof with a slope of 12 °.
|
|
|
Study of the properties of cement composites with polypropylene fiber modified low-temperature plasma
Žižková, Lucie ; Herka, Petr (referee) ; Bodnárová, Lenka (advisor)
Plasma treatment of polypropylene fibers presents a new progressive method, how to increase the utility properties of these fibers. The thesis is focused on verifying the effect of surface treatment of polypropylene fibers in concrete with low-temperature plasma discharge in the normal atmosphere. The paper describes the procedure for treatment of polypropylene fibers with low-temperature plasma and evaluate the impact of this adjustment on the volume changes of cement composites. It should also be emphasized that the thesis is focused on the initial volume changes, ie volume changes in the early stages of solidification and only for your own mixture, which is not considered an external load. Subsequently, the experimental verification of the effect of the addition made commercially available fibers and fibers treated plasma volume changes to a selected physico-mechanical properties of the test compounds.
|
|
|
Detached family house, Fulnek
Pustějovský, Jakub ; Žižková, Lucie (referee) ; Müller, Jan (advisor)
My bachelor thesis deals with designing and drafting a project documentation of a family house construction. The object is situated at the cadastral area of Fulnek at a parcel no. 1646/43. It is a standalone, two-storey house without a cellar and with a flat roof and two parking spot in a mildly sloped terrain. Vertical load-bearing structures are constructed from ceramic blocks Porotherm and insulated by contact thermal insulation system ETICS. Ceilings are designed as single monolithic slab. The house is designed for a five-member family. Proposal of internal layout of the building is designed so that its functions meet requirements of all users of home. The project documentation is drafted in accordance with the current version of laws, ordinances and regulations.
|
|
|
Detached family house, Loučka
Onderka, David ; Žižková, Lucie (referee) ; Müller, Jan (advisor)
This bachelor thesis is focused on a design of a single-family house suitable for four permanent residents. The object is situated in a sloping terrain on the selected piece of land in a village Loučka. The house has two above ground floors. Plan dimensions of the house are 11,50 x 7,90 m. The entire building is covered with a gable roof. Vertical load-bearing structures are constructed from ceramic blocks and insulated by contact thermal insulation system ETICS. Foundations are made of a plain concrete. The thesis also provides a project documentation for a construction including ten constructional details, fire safety, thermal engineering, and acoustic solutions.
|
|
|
Detached family house, Havlíčkův Brod
Jůza, Daniel ; Žižková, Lucie (referee) ; Müller, Jan (advisor)
This thesis is focused on a design of the detached single-family house in Havlíčkův Brod. The house is single storey building without a basement, standing on sligthly sloping land. The object has rectangle shape with a flat roof. The layout is designed for four member family and contains two children's rooms, a bedroom and a living room with a kitchen. During the designing, emphasis was put on ecology and renewable resources. Therefore an ecological isolation of wood fiber or mineral insulation appear in the compositions. The vertical walls are sandwich type and are designed as diffusely open with ventilated facade and timber cladding. The roof decking is carried by the roof truss, the insulation is placed above the load-bearing structure. A garage parking for one car and a spacious terrace with wooden structures and pergola are designed following the layout of the house.
|
|
|
Multifunctional Building
Mikuš, Martin ; Žižková, Lucie (referee) ; Vajkay, František (advisor)
Multifunctional building is designed as a 4 storey building with one floor underground and three above-ground floors. The building is situated in the administrative area Vajnory Bratislava. Basement includes cellars and 15 parking spaces. The first floor covers commercial premises suitable for civic amenities. In second and third floor are located apartments. Recent third floor is intentionally reduced to achieve a lower index for compliance with a built-up area.
|
|
|
Family house
Nedělka, Luděk ; Žižková, Lucie (referee) ; Brukner, Bohuslav (advisor)
This bachelor thesis presents a design of a a family house for 4 -5 member family with multifunctional basement, housing a small shop. The house is situated in Žďár subdivision „Klafar“. The house is designed as a two-storey house with a flat roof and a partial basement. Both inside and outside the house, the design respects different levels of the ground around. The house is divided into a living area and a multifunctional area. The multifunctional part of the house is situated in the basement where there is also a garage for two cars, a furnace room and a recreation room. The ground floor is intended as a daytime area and it is suitable for family activities. The first floor with bedrooms is intended as a place to sleep and relax. The entrance into the family house is designed on the ground floor, from the southwest side. The entrance into the multifunctional area is designed in the basement, from the northwest side. The house is built on a concrete base platform supported by foundation structure. The basement is made of lost form construction filled with concrete, the ground floor and the first floor are made of ceramic blocks. Exterior walls are insulated with ETIC mineral wool panels. The roof is designed from prefabricated extensive green roof trays. Analysis of thermal and mechanical properties of the house and fire safety report on the building solution is also a part of this bachelor thesis.
|
|
|
Multifunctional Building
Melo, Jaroslav ; Žižková, Lucie (referee) ; Brukner, Bohuslav (advisor)
This thesis deals with project documentation of a family house with polyfunctionally, intended for to housing. The house is located in Nitra region, in Nitracity district Čermáň. Cadastral district Nitra. The building is designed as a brick building with a contact insulation. Vertical and horizontal supporting structures are made of POROTHERM system. The family house has a gable roof with a slope of 38 °. Construction roof is made up of of wooden elements. The building has two floors.
|
guest ::
RSS feed.