|
|
Technology of the frame base production
Havliš, Lukáš ; Špaček, Jindřich (referee) ; Rumíšek, Pavel (advisor)
The bachelor's thesis deals with technological project of frame base production. Since a component designated as a wing base is produced together with this base, the thesis is also concerned with production of this part. Methods of sheet metal forming are analyzed in the theoretical part. Methods used during production pressings - such as cutting, bending, punching and calibrating – are concerned. Practical part of the thesis comprises description of produced segments and their location and function within the assembly, choice of material, shearing layout and choice of forming machine. Economic evaluation of segments production has been performed in conclusion. As soon as material has been chosen (11 343 material has been chosen with regard to low requirements for assemblies), calculation of cutting and bending force has followed. Forming machine (LE 250 has been found the most suitable one) has been chosen based on results of the necessary forming forces, after evaluation of cutting layout and demand on the sheet metal coil. Two options of components production have been compared in the economic evaluation. Method of production in a common tool has been found more cost-effective.
|
|
|
Proposal technology of production scheet-metal part of car body
Sviták, Martin ; Špaček, Jindřich (referee) ; Žák, Ladislav (advisor)
The Master’s Thesis is focused on stamping of sheet metal parts. The analyzed part is a structural part of an automobile body. The part is made of DC04 (cold rolled mild steel) material. The annual pruduction volume is 10.000 pieces. Theoretical background research is a knowledge base for design of tooling that can produce parts which meet quality requirements. There are three technological processes proposed in the Thesis. An economic analysis identifies the optimal technological process for the production volume. The thesis contains a complex analysis that confirmes material formability. Computer simulation verifies the part design, material and technological parameters of the forming process.
|
|
|
Production of parts for window fittings
Havliš, Lukáš ; Špaček, Jindřich (referee) ; Žák, Ladislav (advisor)
This project submits a proposal for manufacturing technology of casement and frame window hardware base, made of 11343.23 steel 2,5 mm in thickness and with 15000 pieces annual production volume. The components form an integral part of a window hardware arrest mechanism. From potential variants of manufacturing, the technology of stamping and bending, with the use of a combined tool, was chosen. A bibliographic search examining these technologies was made and the machine LE 250 with nominal forming force 2 500kN was selected. The project comprises structural and technological calculations, including the combined tool design. In the economical part of the project, the product prices were quoted and the break-even point was determined. The break-even point is broken as soon as 13 046 pieces are manufactured.
|
|
|
Proposal for the production of variants of flat sheet metal parts with holes
Hamáček, Petr ; Vonka, Vladimír (referee) ; Špaček, Jindřich (advisor)
HAMÁČEK Petr: Proposal for the production of variants of flat sheet metal parts with holes. The final work of bachalors studies, 3th grade, academic year 2008/2009. FME VUT in Brno, Institute of manufacturing technology, department of metal forming and plastics. Bachelor work elaborated in the scope of bachalor studies of the branch B2307 submitted variants of production for flat sheet metal parts with holes. Theoretical part of the thesis is pointed to theory of cutting and description of personál cutting process. Shearing machine LEPP with shearing force 1000 kN is selected. Blanking puch and blanking are made from 19 class alloyed instrumental steels, heat treated according to graphical documentation. Cuttingin machine is using standardized components and it is solved by particular frame into eccentric machine. In the work there are implied necessary calcullations for both variants including economical evaluation.
|
|
|
The manufacturing of shallow drawing part by rubber
Klepáč, Patrik ; Špaček, Jindřich (referee) ; Podaný, Kamil (advisor)
An object of this master thesis is the proposal of variants solving a manufacturing of required part and the selection right technology for single part production of required part from stainless steel 17240 (DIN 1.4301). At the first part of this thesis is briefly reviewed conventional forming and at rest of this thesis is closely reviewed the technology using the elastic tools (rubber, urethane), hydroforming technology and design of proper tool for required part. At the end of this work will be release economics estimation of fine technology and designed tool.
|
|
|
Production single parts from sheet metal
Smutný, Petr ; Špaček, Jindřich (referee) ; Žák, Ladislav (advisor)
PETR SMUTNÝ: Production single parts from sheet metal. Diploma assert of daily magisterial`s studies, study programme INDUSTRY. The branch manufacturing technology, level 2, 2nd form, academical year 2010/2011, study group 60. FME of Brno University of Technology, department of forming and plastics, May 2011, 65 pages, 9 tables, 3supplements. The theme of this diploma assert is suggestion technology of production drawn part with plange by plat forming. The component is made from the steel sheet 17240 width 1,5 mm. Drawn part is made from sheet about proportion 2000 x 1000 mm, by set of production 50 000 ps/year. For production is designed two variants of deep drawing. The komponent will be made on press CTH250 in two steps. The aim of this diploma assert is designing of suitable technology progression of production including technical documetation.
|
|
|
Mobilní aplikace pro správu vozidel pro platformu Android
Špaček, Jindřich
The bachelor thesis deals with the design and implementation of a mobile application for vehicle management for the Android platform. The aim of this application is to facilitate users in maintenance scheduling, tracking expenses related to vehicle operation and overall management. The thesis describes the design of the application, the implementation process and the evaluation of the testing.
|
|
|
Production of parts for window fittings
Havliš, Lukáš ; Špaček, Jindřich (referee) ; Žák, Ladislav (advisor)
This project submits a proposal for manufacturing technology of casement and frame window hardware base, made of 11343.23 steel 2,5 mm in thickness and with 15000 pieces annual production volume. The components form an integral part of a window hardware arrest mechanism. From potential variants of manufacturing, the technology of stamping and bending, with the use of a combined tool, was chosen. A bibliographic search examining these technologies was made and the machine LE 250 with nominal forming force 2 500kN was selected. The project comprises structural and technological calculations, including the combined tool design. In the economical part of the project, the product prices were quoted and the break-even point was determined. The break-even point is broken as soon as 13 046 pieces are manufactured.
|
|
|
Suggestion of convenient technologies of production for submitted flat sheet metal part
Chaloupková, Lucie ; Podaný, Kamil (referee) ; Špaček, Jindřich (advisor)
The project is elaborated in frame of engineering studies branch 2303T002. The project is submitting suggestion of convenient technologies of production for submitted flat sheet metal part 11 375. There are proposed a number of variants of production method, namely: production on sequence shearing tool, production by means of plasma machine, laser machines and machines for watejets cutting. Particular part is designed for the production quantity of 380 000 pieces per year. Based on the literary study of the shear and calculations, there were designed shearing tool for given part. For this tool the press CDCH 3000 P was selected (producer HESSE+CO Maschinenfabrik GmbH), with nominal force 3 000 kN. In the work there are included necessary calculations for all variants including technological and economical evaluation.
|
|
|
Use of modern technologies in the production of flat sheet metal parts
Kohoutová, Zuzana ; Podaný, Kamil (referee) ; Špaček, Jindřich (advisor)
The final work elaborated in the scope of master's studies of the branch 2303T002 submitted use of modern technologies in the production of flat sheet metal parts from the material 11 373. Work is set for cold shaping of metal by means of cutting. Production on sequence shearing tool is based on series 350 000 pieces per year. Universal hydraulic press CUPS 63 DEU with shearing force 630 kN is selected for realization. Work is also focused on the production of the same components using plasma, laser and water CNC equipment and the subsequent economic evaluation of all variants of the production. In enclosure there is drawing documentation for cutting tool.
|
guest ::
RSS feed.