National Repository of Grey Literature 81 records found  beginprevious65 - 74next  jump to record: Search took 0.01 seconds. 
Increased power microturbines operating in indirect circulation
Polák, Luboš ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
Turbogenerator unit 100B TGU, produced in the First Brno Engineering Velká Bíteš a.s., works in Brayton indirect circulation. The aim of this work is the proposal to increase performance levels of technological unit in which the micro-turbine is applied. The work presents various ways to increase performance and efficiency of circulation. The possible options are compared with each of the technological and economic terms. Based on these criteria was selected variant feeding additional water into the circulation. For this design was the work of a mathematical model based on, which was established as the economic balance of the selected variants. The thesis also proposes a technological scheme, which is already incorporated the selected variant and an outline of the verification tests.
3-wheel air cycle machine
Vrána, Jan ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
For air cooling in aircrafts is used an air cycle machine. Recently, there is focusing on incresing efficiency of air cycle and due this are added another rotors. Design of machine with three rotors is performed in this thesis.
Design concept of the facility for the educational objectives of the boiling crisis
Vojáčková, Jitka ; Škorpík, Jiří (referee) ; Martinec, Jiří (advisor)
This thesis deals with a design concept of the facility for the educational objectives of the boiling crisis. In the first part, the issue of boiling crisis is explained. There are also examples of some experimental facilities in the world. The second part includes design concept of a loop, which is accompanied by designs of individual devices, such as separator, condenser, exchanger, pump, water tank, electric heater. The thesis also states designs of throttle control, temperature control and flow control.
Compressor Turbocharger Design
Domanský, David ; Škorpík, Jiří (referee) ; Fiedler, Jan (advisor)
The master's thesis deals with compressor turbochargers used for supercharging of combustion engines. The aim of the thesis is feasibility study of compressor surge limit simulation. First of all the principle and purpose of supercharged combustion engines is described and the compressors' types using for supercharging are mentioned as well. The main part of the thesis is focused on flow instabilities and their influence on compressor operating zone. There are mentioned some possibilities of operating zone extension. The practical part comprises the simplified computation of a one stage of centrifugal compressor and flow analysis by means of CFD simulation.
Reverse Turbocharger
Zygmont, Martin ; Škorpík, Jiří (referee) ; Fiedler, Jan (advisor)
The diploma thesis consists of a theoretical part, which deals with the description of reversing turbocharger and its components. The following part is devoted to calculating the radial-axial compressor and turbine. It also performs a calculation of gear box and characteristics of the turbine.
Combi-cycle power plant
Tkachuk, Andriy ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
This master thesis follows the bachelor thesis with the same name. It is looks into the analyses of the combi-cycle, the advantage of which is high efficiency and easy separation of CO2 for its storage and further usage. It introduces the Graz cycle, its thermal balance a basic arrangement. The calculation is attached in a separate .XLS file. At the end of the thesis, the result of the calculation is interpreted and the conditions under which the project would be realized are outlined.
Wind power plant in a chosen locality
Dohnal, Petr ; Škorpík, Jiří (referee) ; Martinec, Jiří (advisor)
This master thesis deals with problematic wind power plants. There are described advantages and disadvantages of wind power plants and their environmental impacts. Thesis include chosen locality for wind power plant, chosen fitting types of turbines and calculation which choosing turbine for chosen locality. There are accomplished parametric studies of main parameters. From this study is chosen best fitting model of wind turbine. In the end are adduced statistics from Czech Republic, Europe and world.
A proposal of power plant with steam engine.
Peterka, Lubomír ; Fiedler, Jan (referee) ; Škorpík, Jiří (advisor)
The final thesis deals with the heating plant with piston steam engine design according to heat consumption background in the location of Velky Karlov and with the design of a heating scheme including its explicit parameters. Further on it deals with the possibilities of the heating plant output regulation and with the solution of natural gas and biomass heating plant operations aside the heating period.
Turbochargers
Veleba, Lukáš ; Škorpík, Jiří (referee) ; Kracík, Petr (advisor)
This bachelor thesis describes the basic principles of turbocharger function with a focus on the causes and consequences of damage. In it’s four main parts, the thesis depicts the historical evolution of turbochargers, explains the basic principle of supercharging, offers a general classification of superchargers and introduces some of the lines of turbochargers being produced by manufacturers today. The key part is focused on the types of turbocharger damage dealt with at TurboCar, s.r.o.
Usability of small wind turbine at household
Veselý, Petr ; Kracík, Petr (referee) ; Škorpík, Jiří (advisor)
The topic of bachelor’s thesis are small wind turbines, which can be divided into five basic parts. A history of wind energy is described in the beginning. Second part is all about manufacturers of wind turbines. Legislative and operating conditoins are prescribed in next section. Penultimate section deals with construction and main components of small wind device. Last part contains aerodynamic design with technical calculations.

National Repository of Grey Literature : 81 records found   beginprevious65 - 74next  jump to record:
See also: similar author names
2 Škorpík, Jakub
Interested in being notified about new results for this query?
Subscribe to the RSS feed.