|
|
Flat House
Jakubčík, Lukáš ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
This bachelor´s thesis deals with the design of detached apartment building in Mikulov. The apartment building is set into the sloping terrain of the town of Mikulov and consists of one basement and four above-ground floors. From the first to third above-ground floors two residential units with balconies are designed, on the top fourth floor is one spacious residential unit with access to the outdoor terrace. The floors are serviced by a staircase supplemented by an elevator in a separate elevator shaft. The building uses a structural system of ceramic parts for vertical and horizontal structures, part of the foundation structure is made of lost formwork. The roof of the building is warm flat roof. The bachelor´s thesis contains project documentation for the construction.
|
|
|
Family House Andovce
Tóth, Adrián ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
The subject of this thesis is two-storey reinforced concrete basement house. The building plot is located in Andovce. The House is designed with the view of the location. The House will be used for living of a family of four members. The plan view of the House will be used for living of a family of four members. The plan view of the House is almost rectangular. The main entrance and the driveway to the House is at 1st floor level. The vertical walls are formed by a concret system with thermal insulation sheathed on both sides of wood chip boards. The ceiling structure is made of concrete beams. The detached house is covered with three shed roofs. The project was prepared by a computer program called Autocad.
|
|
|
Falt House Hodonice
Jackulíková, Denisa ; Novotný, Miloslav (referee) ; Novotný, Miloslav (advisor)
The diploma thesis was prepared for the new construction of an apartment building at the stage of project documentation for the execution of the construction. The building is part of a new residential zone built on the premises of the former JZD in the village of Hodonice near Znojmo. The project was developed in accordance with the spatial plan and respects the surrounding development. The goal was to design a building that would provide residents with new residential housing that meets today's standards. It is a partially basement building with one basement floor and three aboveground floors. In the basement of the building there are cellar cubicles assigned to individual apartments, technical rooms, a room for bikes and strollers and a drying room. On the upper floors there are a total of twelve apartments with layouts of 1+kk, 2+kk and 4+kk. The third floor of the apartment building is set back, which gave space for the creation of terraces that offer beautiful views of the surrounding countryside. Photovoltaic panels and heat pumps are placed on the flat roof. The new construction of the apartment building meets the requirements for a building with almost zero energy consumption.
|
|
|
Detached family house, Boreč
Kučerová, Daniela ; Novotný, Miloslav (referee) ; Müller, Jan (advisor)
This bachelor´s thesis investigates the creation of detached house plans in the municipality of Boreč. The building is designed as a two story house where the lower floor is set to the ground. Thus the house is partly sub-based and follows the sloping terrain. The slope is oriented to the southeastern side. The main entrance to the house is located at the 2nd floor level, accessible from the west side of the access road. In this section of the house there is also an entrance hall, a staircase to the 1st floor, a bedroom, two children's rooms, a bathroom with a toilet, a utility room including a storage area and a garage. On the 1st floor there is a social zone, consisting of a living room with a dining room and a kitchen. There is also a guest room, a laundry room, a sauna, a toilet, a technical room and a pantry. The social and rest zones are oriented to the south to southeast with a view. Vertical structures are designed from sand-lime bricks. The ceiling above the lowest level is made of reinforced concrete monolithic board. The building is roofed with a flat single-skin roof with a slope of 3.5 percent.
|
|
|
Detached house with a cafe in Havlíčkův Brod
Havlová, Jana ; Novotný, Miloslav (referee) ; Petříček, Tomáš (advisor)
The subject of this these the proces of building technical od desingn documentation for the realization of a newly-built detached house with a cafe in Havlíčkův Brod. The building is slightly sloping terrain and is with partial basement. Living area have got two above- ground floor and basement. Whole part is roofing gable roof with roof slope 30° with concrete tiles. In the second part is single-storey building a cafe is roofing flat green roof with slope 3°.The garage is separate with flat green roof. Vertical loadbearing structures above ground are made of Porotherm system, external walls of the basement are made of prefabricated concrete shuttering blocks. Horizontal structures are designed as a monolithic reinforced concrete slab. Part of the external wall finish are made of silicone plaster and part of it consists of ventilated facade with wood cladding.
|
|
|
Renovation apartment building Křenová 76, Brno
Neduchal, Zbyněk ; Novotný, Miloslav (referee) ; Petříček, Tomáš (advisor)
The bachelor thesis elaborates the project documentation for the realization of the building for the renovation of the apartment building on street Křenová 76 in Brno. The building is divided into two residential above-ground floors and a non-residential basement and an attic. On both above-ground floors there are two dwellings that are not currently being used. The foundations are made of bricks, vertical and non-bearing walls are also made of bricks, horizontal structures are in the basement of barrel vault and in the above-ground floors there are wooden joist floor with reed. The roof truss is made out of a purlin system with a strutted purlin roof, a roof made of clay tile roofing. There will be seven new apartments and a café in the 1st floor with an outdoor terrace in the garden area. The rehabilitation of wet masonry by pressurized grouting, ventilated flooring with igloo system, wooden joist floor with a reinforced concrete slab and a newly ventilated roofing cladding with thermal insulation between and above ramps with folded roofing made out of ceramic tiles will be carried out.
|
|
| |
|
|
Gel infusion screen system for additional waterproofing of various types of masonry with share of secondary raw materials
Melichar, Jindřich ; Klečka,, Tomáš (referee) ; Dohnálek,, Pavel (referee) ; Novotný, Miloslav (referee) ; Drochytka, Rostislav (advisor)
Virtually any construction project in our climate zone is facing some form of moisture. Older and historical buildings are mostly affected by the negative impact of water. Previously, the additional reduction of the moisture was executed only by mechanical methods, pushing insulating sheets or breaking through and cutting of masonry. Over time chemical methods were also invented, which are compared to the mechanical considerably simpler and user friendly applications to statics of treated buildings, making them ideal for the treatment of historical buildings or buildings that would not bear significant disruption. The main principle of chemical methods of redevelopment of wet masonry is the application of special material into the line of drilled holes with a given pitch. Subsequent penetration of the grouting material is believed to intersect an arc of individual drill holes, and thus to create so-called grout curtain that prevents the accumulation of water above it. Injection material may also contain a proportion of secondary raw materials, thereby reducing the influence of the impact of production on the environment. Efficiency infusion materials in masonry affected by many factors, such as temperature, humidity, or the type of material treated. It is also an important factor to determine the effectiveness of the remediation of the material, proving its ability to penetrate the building material by identifying its presence in it.
|
|
|
Renovation and extension of detached house
Sitta, Marek ; Novotný, Miloslav (referee) ; Petříček, Tomáš (advisor)
The bachelor thesis elaborates project documentation for construction of a family house in Nemile, located in the Olomouc Region. This is a construction and extension of an existing family house. The house has two residential floors with a partial basement. There is one apartment unit in it. Construction of a family house is carried out in the form of restoration of plaster, flooring, facade systems, replacement of windows, doors, technical background of the building and other systems. The existing ground plan of the basement and the first floor will be preserved in its entirety by an additional building, the second floor will be altered in its entirety. The shape of the ground plan of the building will be altered in the form of an extension of the residential zone (dining room and living room kitchen), then an extension of the shed for two vehicles will be built. Vertical support structures are made of Porotherm 30 Profi ceramic brick technology with EPS GreyWall contact system. Base structures of monolithic concrete. Horizontal constructions are made from the Porotherm MIAKO system. A roof made up of a flat roof at the extension of a residential area and a shelter for vehicles and above the existing parts of the house is used a new built-in roof panel system made of structural wood. The design emphasized increased comfort in use and the overall modern concept of a family house building. A preferred family home is a heating system with an air / water heat pump with underfloor heating. The designed house of a family house meets the standards of modern living and tries to solve the issue of quality housing both in terms of economic and ecological energy management and the sustainability of the standard of living and the life of the building without the necessity of adaptation. The design emphasized increased comfort in use and the overall modern concept of a family house building. The modern visual arrangement is achieved by the shape of the building in combination
|
|
|
Multifunctional building
Polický, Jan ; Tichomirov, Vladimír (referee) ; Novotný, Miloslav (advisor)
Project solves seven-storey building with basement in urban area. Object mainly consists of building and private parking area. Functionally, the building is divided into parts for commercial, administrative and housing. The shape of the building is terraced with flat roof. Structural systém is a frame with locally supported ceilings founded on reinforced concrete slab supported by piles. The building envelope is partly of ceramics blocks, concrete wtih ETICS and curtain wall. The aim of project is to create documentation for realization based on building physics solution.
|
guest ::
