|
|
Mixed-use building in Mikulov
Kučera, Pavel ; Klimecký, Martin (referee) ; Gerö, Jiří (advisor) ; Brzoň, Roman (advisor)
The bachelor's thesis follows a project developed within the subject AG035 Studio of Architectural Creation. The subject of the design is a multifunctional house in the place of the gap, which currently serves as a parking lot or marketplace. The multifunctional house is located close to the walls and castle gardens of Mikulov Castle - located in the urban conservation zone, which was declared in Mikulov in 1982. Due to the elevation of the plot and the street to which the design is adjacent, the multifunctional house is divided into three related parts. The outer parts are set aside for commercial purposes on the first floor (florist, newsagent, bistro). The second, third floor and attic offer a total of 8 apartments. The middle part is reserved only for a literary café. The design also includes underground parking accessible by stairs from the first floor of the outer parts of the multifunctional building. Entry and exit is provided by two ramps. An integral part is the culture of the remaining free space adjacent to the walls of the Mikulov castle. It will consist of gardens and a space/passage adjacent to the wine cellar located under the walls. At the same time, it will be possible to get from this passage to the area of the castle gardens by means of a designed elevator. The facades of all three parts of the multifunctional house are richly glazed and designed in white, beige plaster or pigmented concrete trowel. They take into account the fact that the multifunctional house is located in the urban conservation zone. The roof of the building is saddle with concrete covering in a traditional red-brown colour.
|
|
|
European emission legislation
Rytina, Matěj ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this bachelor thesis was to write about exhaust emissions and their influence on environment, briefly sum issue of emission standards up and mainly sum existing facts about the “Dieselgate” affair up. I wanted to objectively evaluate this issue in my bachelor thesis. Asset of this thesis was mend to be in fact that this affair has not been academically covered yet.
|
|
|
Gas exchange systems of two-stroke engines
Kovář, Michal ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
This bachelor thesis is focused on the analysis of the development and critical evaluation of the gas exchange system of two-stroke engines. The aim of the work was to use research to concentrate various options for gas exchange system of two-stroke engines of various power categories, to describe individual solutions and point out the advantages and disadvantages of individual systems and then outline possible future developments in this area.
|
|
|
Stabilizing systems of passenger cars
Odehnal, Jakub ; Vopařil, Jan (referee) ; Kučera, Pavel (advisor)
This Bachelor’s thesis describes basic stabilizing systems of passenger cars. These systems are correcting driving the cars and improve safety of the traffic. The main systems described in this thesis are ABS, ASR and ESP. There are also summarized some other assistant systems. In the end there is also view of various individual car companies and their theories of stabilizing of cars.
|
|
|
Biometrical security system
Tříska, Martin ; Kučera, Pavel (referee) ; Macho, Tomáš (advisor)
This bachelor’s thesis deals with coplete design and implementation of access control system.using biometrical data. System is applicable in smaller applications. The first part contains an small introduction to fingerprint acquiring/processing and also describe selection of a communication interface between terminals and host system including possible ways of embedding into devices. The next part is covered in the practical implementation in terms of both hardware and software.
|
|
|
Alternative powertrains of vehicles
Filip, Vojtěch ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
The aim of this thesis is the analysis of most common alternative drive systems currently used in cars, their comparison with the current gasoline and diesel engines. Familiarization with the technical solutions of drives, their categorization into several groups according to the specific key features. It also deals the most important components of an alternative fuels automobiles, respecting their strengths and also weaknesses that currently hinder expansion of these propulsions, economically as well as technically.
|
|
| |
|
|
Electronic speed controller
Šimbera, Michal ; Kučera, Pavel (referee) ; Svída, David (advisor)
The thesis deals with the design, realisation and functional verification of an electronic cruise control unit. Required inputs, outputs and controller of the control unit are identified first. The design and layout of the electronical components, including the processor, power supply and other necessary hardware is discussed. The algorithm for the control unit is developed in C/C++ and thoroughly analysed. The functionality of the cruise control unit equipped with the algorithm is verified through a case study performed on a combustion engine.
|
|
|
Wireless sensor for intelligent buildings
Grepl, Tomáš ; Kučera, Pavel (referee) ; Hynčica, Ondřej (advisor)
The theme of the Bachelor’s work is based on the comparison of two measuring schemes measured the temperature for the wireless measurement of the temperature in the building and the comparison of the power consumption of these schemes. Measurement is perforemed by using wireless modules ZigBit900 which are based on ZigBee standard. The first part of the work deals with the theoretical description of the communication standard. There is analyzed the basic issue of technology and the reader can be indicated to the issue. In the second part there is mentioned the description of the developmental kit ZigBit 900. Another section brings the basic information about the programming package BitCloud, which is used for programming of the developmental kit. In addition, designs of two measuring schemes of temperature are mentioned there. Then the reader find there the selection of appropriate application and the part of emended code and the description of temperature measurement. The last chapter schows the measuring and assessing of the temperature. The calculation of the theoretical value of power comsumption for the frequncy band 868 MHz and 2,4 GHz is the lastest researched problem in the work. In conclusion of this Bachelor’s work is included the discussion of achieved results.
|
|
|
Passive and active safety features in passenger cars
Jahoda, Patrik ; Kučera, Pavel (referee) ; Píštěk, Václav (advisor)
This bachelor thesis deals with safety elements of all kinds in personal vehicles and their general introduction. This elements are divided and broadened and roughly described. My work contains short summary of history of safety elements. Conclusion contains evaluation of individual elements. Video with crash test is inserted in this graduate work.
|
guest ::
