|
|
Design of electrical power supply of city Jičín
Vánský, Pavel ; Kopička, Marek (referee) ; Toman, Petr (advisor)
The thesis deals with the issue of voltage changes or changes in the supply of electric energy of the particular town. The work entitled "Design of electrical power supply of city Jičín" addresses the specific case of unification of the town of Jičín. The first part describes the current state of distribution equipment, including calculations of short-circuit conditions, cross sections, a description of the sites of electricity consumption and the power consumption of the town. From the detailed description of the current state it is clear that most of the equipment is beyond its mean time to breakdown and has been in operation longer than intended. The next chapters describe possible solutions to reconstruction of the facilities. The first option – marked as option A – aims to maintain the existing 10kV distribution lines. Option B presents a solution in the form of abolition of urban transformation and transition to the 35kV voltage level (which is the voltage level used in the CEZ Distribution plc, eastern area). A comparison of proposed options is made in the technical-economic evaluation. The evaluation brings a detailed description of progress of implementation and planning of the reconstruction of facility particular parts for individual years. The conclusion summarizes the results of the technical-economic assessment of both options and gives reasons why option B, which proposes transition to the 35kV voltage level, is more advantageous.
|
|
|
Alternative Energy Sources and Their Integration into the Concept of Smart Grids
Kopička, Marek ; Procházka, Jiří (referee) ; Baxant, Petr (advisor)
This work deals mainly with electrical energy. In the first part is focused on alternative energy sources, and describes structure of consumption and production of electricity over the past few years, during which is focuses on renewable energy sources. In this context, assesses the conditions for alternative energy sources in the Czech Republic from the perspective of the legislative, as well as current status and potential of alternative energy sources and tries to predict the development of these issues. The next section describes the Smart Grids as a means to achieve these goals. There are presented the basic features of this system, its goals and challenges, a description of the integration of Smart Grids with other sources of electricity and the benefits of using Smart Grids both from the perspective of user and from the perspective of system. Other parts are focused on distributed control systems in the energy sector, its development and principle. The last part is devoted to consideration of the role of alternative energy sources and distributed generation in Smart Grids.
|
|
|
Utilization of renewable energy sources in Czech Republic
Kopička, Marek ; Bok, Jaromír (referee) ; Matoušek, Antonín (advisor)
This thesis deals with consideration of energy facilities structure in Czech Republic. It is depicted in it their evolution from point of: electric energy consumption, structures of energy facilities and electricity prices. Further, is here depicted a production of electric energy for the year 2009, from the point of: produce, sources, consumption and ratio of factories. Of course, the RSE (renewable sources of energy) effect and share of scope on this evolution and structure, is also mentioned here. The next part is pointed to basic description of each sources of electric energy. It is not mentioned here only factories which uses for it´s production renewable primary sources but also another types of factories. Their pros and cons are also summarized. The last part of this work is a thought of realization of fictive project, which could replace a part of steam power plants' share by producing electric energy through renewable sources. It is re-counted and suggested here a few possibilities of this realization from the point of needed installed power and approximate estimation of capital expenditure.
|
|
|
Evaluation and Comparison of Power Quality Changes from Multiple Measured Points
Koštialik, Marek ; Kopička, Marek (referee) ; Paar, Martin (advisor)
This diploma thesis deal with the description of electrical energy quality in low voltage. A test data model is created in the thesis which can automatically evaluate the state of the quality of electric energy in terms of higher harmonic voltages in the MATLAB programming environment. To verify the correct design of the model, two possible views of simulated data are created in the form of tables and graphical dependencies. An user interface is created for more complex control of each model states of the data being considered.
|
|
| |
|
|
Modern protection of distributed energy resources
Bučko, Ondrej ; Kopička, Marek (referee) ; Topolánek, David (advisor)
The aim of this thesis is to describe distributed energy resources (DER) protection system’s main problems and to suggests their possible solutions. The second part is focused on collecting information and description of the new functional principles of protection devices used for protecting distribution network against backwards influences from the DER. The purpose of the thesis is the description of functional principles of the protection devices that are not commonly used in the distribution networks of the Czech Republic. In addition, the schemes of functional blocks of the protection devices that help to configure or project them are also part of this thesis.
|
|
|
Analysis of parallel operation of nodal areas of 110 kV Krasikov and Neznasov transformers stations
Kostkan, Petr ; Kopička, Marek (referee) ; Ptáček, Michal (advisor)
Currently, the nodal areas of Neznášov substation and Krasíkov substation, which belong to ČEZd distribution network 110 kV – East, are operand as separate units. In the defined setting, each nodal area comprises of two 400/110 kV transformers. In the case of failure of the transformer T401 or T402, the criterion N-1 for twenty percent of the rated output is not met. Such problem can be solved by parallel operation of nodal areas of Neznášov substation and Krasíkov substation. The principal as well as practical aim of this thesis is to interconnect the bridge operated connection in separated areas into parallel/loop operation of nodal areas (supplied by 400/110 kV transformers). Computing software is used to calculate the steady state and short-circuit conditions in the distribution network 110 kV for separate and parallel operation of mentioned nodal areas. Power flow analysis is aimed at assessment and evaluation of voltage conditions, transformers loading (400/110 kV and 110/vn) as well as 110 kV lines loading. Obtained short-circuit indices is used to examine short-circuit, withstand capability of the 110 kV substation. Finally, benefits as well as drawbacks of the separate and parallel operation are compared and evaluated. If necessary, the technical arrangements are proposed/designed in order to allow parallel operation of nodal areas Neznášov substation and Krasíkov substation.
|
|
|
Evaluation of MV/LV network earthing systems
Sítař, Martin ; Topolánek, David (referee) ; Kopička, Marek (advisor)
This master's thesis deals with the measurement of grounding systems in HV/LV distribution networks, which includes grounding system of distribution substation and transmission lines. Explores the issue and principles for the measurement of parameters, which are important for the protection of persons and animals in order not to touch exposed conductive part accidentally, protection of electrical machines and equipment against high fault current and dangerous surges while the correct function of the connected electrical equipment is maintained. These parameters include earth potential rise, ground resistance, soil resistivity, touch voltage, step voltage and transferred potential to the LV network. The aim of this work is the preparation, analysis and subsequent evaluation for the real measurement in practice. These earthing-system measurements were carried out at the distribution station and the concrete pole with a section disconnector. Then a numerical model of the grounding system of concrete pole was created in ANSYS. Subsequent evaluation of the results as numerical terms (comparison measurements and simulated results) and evaluation in terms of analytical (measurement results compliance with the standard) including the numerical model of the earthing system is solved in the practical part of the master's thesis.
|
|
|
Options of network operation with distributed generation sources in island operation
Mareček, Tomáš ; Drápela, Jiří (referee) ; Kopička, Marek (advisor)
This diploma thesis presents managing of the island mode using distributed generation. In the theoretical part of the thesis, the power system of the Czech Republic is described, together with its future development, and future development of installed capacity of distributed generation. Types of distributed generation are also mentioned. Next part of this work is focused on technological parts of islanding operation and its requirements. The following part describes components of the smart grids and mentions some of its functionalities. The practical part of the thesis describes the created models of components in PSCAD programme. From those components two slightly different grid models are created. On those grid models, simulations are made, during which island mode is created. Some of the grid functionalities are tested during those simulations, for example; reaction of the island mode for load increase, load decrease and others.
|
|
|
HV grid model in PSCAD
Tomšů, Vojtěch ; Ptáček, Michal (referee) ; Kopička, Marek (advisor)
This thesis deals with the issue of computer modelling and electroenergetic calculations. The first part focuses on the description of the PSCAD program and selected competitive software. There are listed main characteristics, usage and subsequently the overall comparison of the programs with potential use in electroenergetic industry. It also lists the basics of PSCAD and description of its working environment. Another section deals with the calculation of parameters of overhead lines, transmision lines substitute with pi-section and the process of pi-section phasor diagram construction. In the next part, there is a model of HV grid in the form of pi-section. As reference values for simulation were used values from exercise of the subject Distribution of electric energy. Output values obtained from the simulation in PSCAD were used to create a phasor diagram in Matlab. The last part focuses on the issue of calculating the natural power, cascade and parallel sections sorting and a simple case of three-phase fault.
|
guest ::
