|
|
Design of manufacturing technology for plastic cogwheel
Vyhnanovský, Jaroslav ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This project has been developed within the master study of Engineering Technology and Industrial Management a design of manufacturing technology for plastic cogwheel is introduced. The cogwheel will be produced by plastic injection moulding. POM material with a trade name Delrin 100 NC010 from DuPont Company will be used. An injection mould is a tool for producing a plastic cogwheel using injection moulding technology. Production will take place on the machine Allrounder 420 C Golden Edition 1000-290 from Arburg German Company headquartered in Loßburg, where the seat of parent company is situated.
|
|
|
Production technology of plastic porter for ammunition
Hejl, Dušan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Dissertation deals with solution of production of set component „plastic porter for ammunition“. Component is made from high-density polyethylene with business marking LITEN ML 77, suggested series of 3 000 000 pieces. On the basis of literary study of plastics injection problems and necessary calculations, there was proposed injection form. This form is solved by means of normalised components from company Meusburger. There was chosen injection machine from company Arburg Allrounger 370 S 700 – 170.
|
|
|
Production technology of plastic unit base
Vyškovský, Stanislav ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Thermoplastic injection technology is widely used in all sectors of consumer electronics and automotive industry. The biggest advantage of this manufacturing technology is a high degree of automatization and good reproducibility of the manufacturing process. Another advantage is the possibility of recycling of the gating scrap and defective products. The main task of this work is to calculate the necessary parameters for the injection process, which takes place at the designed injection form. Next part is technical design which includes choice of standard parts of injection mold and idividual semi-finished parts for mold. Thesis continues with selecting the type of injection press based on calculated parameters of the injection process. Thesis is finished by technical-economic evaluation.
|
|
|
Production technology of plastic body aperture
Dluhoš, Jan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis deals with the production of a plastic body of the aperture by the method of injection moulding. The work includes a design of the injection mould for the given component. First, an appropriate material for the moulded piece was chosen and then the necessary calculations for the injection mould were made. A quadruplex injection mould with a heated inlet nozzle and pullout cores was designed based on these calculations. Modular components were chosen when designing the injection mould. The next part of the thesis contains the selection of the injection moulding machine for the given mould. The conclusion contains a technical-economical evaluation including the cost estimating for the injection mould and cost estimating for one moulded piece.
|
|
|
Optimization of technological parameters of injection plastic parts
Ulrich, Josef ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis describes the optimalization of technological parameters during commissioning of injection mold manufacturing. In the introduction, there is general literary studies of plastics, injection molds, injection holding machine, injection holding technology and their effect on quality. The practical part includes an analysis of current state, calculation of injection parameters, moldflow analysis and sampling on the machine. Finally, there is choice of optimal injection holding parameters, design of workplace and technical-economic evaluation.
|
|
|
Production technology of plastic base device with terminal
Horník, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
Master’s thesis deals with selection of a proper technology for manufacturing of chosen plastic part. The beginning of thesis contains part survey. Plastic injection was chosen as the most suitable manufacturing technology. Required theoretical knowledge for plastic injection mould designing were extracted in the recherche. Individual chapters deals with plastics, their manufacturing and plastic injection technology with all required knowledge about this technology, machines and moulds. Designing chapter contains every required calculation for mould design and all individual sections of mould design and injection machine selection. Injection simulations and their evaluations are part of this thesis aswell. Assembly and forms drawings as well as other documents used during thesis processing are included in the attachments.
|
|
|
Technology design manufacturing plastic worm gear
Petrucha, Roman ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
The master thesis deals with the design of the injection mold for the production of a plastic two-part worm which is part of the worm gear set in the sleeve. From the beginning, an analysis of the assigned component was performed, specifying its function and specifying the criteria that must be met by the component. In addition, design of the production technology (injection molding) was carried out, followed by theoretical analysis of plastic materials, injection molding technology and mold design. Subsequently, in the practical part, a complete design of the injection mold was made on the basis of simulations and technological calculations. On the basis of the parameters of the injection mold, a machine was chosen, on which production should be carried out according to the proposed technological procedure. The conclusion of the thesis contains a technical and economic evaluation of the proposed technology for the production of Plastics splatter component.
|
|
|
Engineering plastics for specific applications
Vrátný, Martin ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This bachelor’s thesis is focused on heat resistance and chemical resistance of plastics. The first part deals with properties and usage of selected plastics. The second part includes description of heat resistance and chemical resistance. Selected plastics are compared in table by their resistance. In conclusion the plastics are compared by detected data and suitability of plastics in environment with higher temperatures and aggresive chemical impacts.
|
|
| |
|
|
Technology design manufacturing threaded plastic ends
Vrátný, Martin ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This diploma thesis submits a proposal of technology design manufacturing threaded plastic ends. In the first part it deals with literary studies of plastics and plastic injection molding. In the second part is the design of an injection form for the specified component. Part of the practical part is also the right choice of material and the injection mold, which was designed based on the calculations of technological parameters. In the conclusion of this thesis is technical economic evaluation.
|
guest ::
