|
|
Strain stress analysis of BS splint
Řehák, Kamil ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This master‘s thesis deals with strain-stress analysis of hip joint together with the final applied total endoprosthesis with Burch-Schneider cage. The main point of my work was to find the solution of stress–strain analysis state, which has been mentioned before in connection with Burch-Schneider cage. I describe the technique of geometric creation of whole body system, component´s materials or conditions which are neccessary for calculation. In coclusion there are results achieved in variants. In the first option the case of bone tissue was considered, which don’t reach degradation mechanical properties effect straining under Burch-Schneider cage. In some cases when the bone tissue is untimely forced, the necrosis of bone tissue takes place under Burch-Schneider cage. This possibility is described in the second option of type. For every option there was a case which was calculated with applied screw or without it. In all option mechanical features of cancellous bone tissue and their change influence on achieved results were considered. This problem was solved computational simulation in commercial software Ansys Workbench 12.0.
|
|
|
Stress-strain analysis of a crane arm
Mora, Lukáš ; Halabuk, Dávid (referee) ; Fuis, Vladimír (advisor)
The content of this bachelor’s work is a summarization of types of tower cranes and subsequent stress-strain analysis of the crane arm of the crane type 150EC-B8 Litronic located on the Šumavská street in Brno. Analytical stress-strain analysis is calculated with equations of equilibrium using joint method in various types of loading of the construction with MAPLE software. Numerical calculation is executed on 3D model of the construction in software ANSYS. The aim of this bachelor work is the verification of the correctness and comparison results of analytic calculation with numeric calculation and evaluation of the results from a limit states and deformation standpoint.
|
|
|
Finding kinematic quantities of a mechanism and a structural analysis of its members after blockage
Zvozil, Ondrej ; Vosynek, Petr (referee) ; Fuis, Vladimír (advisor)
Diplomová práca, ktorá vznikla v spolupráci so spoločnosťou AUFEER DESIGN (AFD), sa zaoberá analýzou konkrétneho stieračového mechanizmu automobilu. Najprv je uvedená stručná história stieračov. Stieracie sústavy sú potom rozdelené podľa ich usporiadania a spôsobu pohonu. V nasledujúcej kapitole je formulovaná problémová situácia, problém a systém podstatných veličín. Kinematické veličiny kľúčových bodov mechanizmu sú určené analytickým aj numerickým prístupom. Výpočtový model pre kinematickú analýzu je vyvinutý v Matlabe a SimMechanics. Ďalšia časť je venovaná vytváraniu konečno-prvkového modelu v programe ANSA. Všetky deformačne-napäťové analýzy sú vykonané v programe Abaqus. Prvá z nich je parametrická štúdia, ktorá odhaľuje kritické polohy mechanizmu z hľadiska tlakového namáhania určitých súčastí. Mechanizmus v kritických polohách je potom zaťažovaný so zablokovanými ramenami stieračov. Nakoniec sú urobené lineárne analýzy straty vzpernej stability súčastí, u ktorých môže nastať, nasledované nelineárnymi analýzami so zahrnutými imperfekciami.
|
|
|
Stress - strain analysis of save first molar tooth
Valášek, Jiří ; Fuis, Vladimír (referee) ; Florian, Zdeněk (advisor)
This diploma thesis specialises in stress – strain analysis of the save tooth. Concretely this thesis works with the save tooth with cavity of the I. and II. class. At the beginning of this work you can find description of basic filling materials, different ways of cavity´s preparation and subclassification of cavity. This work describes production of geometric model of health and save tooth with cavity of the I. and II. class. Model geometer of the save tooth was im-plemented in several ways, each one concerning different form of cavity, size of cavity and different filling materials. Final element net was created on the base of these geometric mo-dels. Computational model was created with the help of the programme ANSYS 11.0 in gra-phic environment Workbench and with the help of the final elements method. The results of the analysis are following: Continuity of the save tooth happens to break thereby the whole stiffness decreases in comparison with the save tooth. Two filling materials were used for sanitation of the tooth: amalgam and composite resin. As a result of the analysis I consider amalgam to be more suitable for sanitation of teeth in moral section.
|
|
|
Analysis of residual stresses in arterial wall
Novák, Kamil ; Fuis, Vladimír (referee) ; Burša, Jiří (advisor)
This thesis deals with computational modeling of the influence of residual stresses in idealized geometry of blood vessels and subsequent application of acquired knowledge to abdominal aortic aneurysm. In the terms of quality of the computational model, we reduced the uncertainties that are included in the computational model without considering the influence of residual stresses. The basic assumption of homogenization significant peaks of the stress between inner and outer vessel wall was met for each level of the computational model Methods that have been used are: deformation method (opening angle method), inverse mechanics of large deformations, fictitious temperature – for linear elastic material and hyperelastic material defined by the constitutive model. Numerical verification was carried out using program ANSYS.
|
|
|
Stress-strain analysis of Kozlov lookout tower
Winter, Josef ; Vaverka, Jiří (referee) ; Fuis, Vladimír (advisor)
Bachelor thesis is aimed at stress and deformation analysis of strut frame. The object of interest is lookout tower Kozlov close to the city of Česká Třebová in region of Ústí nad Orlicí in Pardubice Department. The main aim is to simplify 3D model of strut frame and its analysis. At the beginning I deal with history of lookout towers, theoretical introduction of bar, strut frames and limit states. Then follows modelling of 3D model with modified topology of bars and following calculation for different static loading and calculation for static determination. At the end numerical calculation was done to compare chosen model with analytic solution.
|
|
|
Napjatostně deformační analýza rozhledny Hraniční vrch
Novák, Tomáš ; Skalka, Petr (referee) ; Fuis, Vladimír (advisor)
Bachelor thesis is focused on stress and deformation analysis of strut frame, which is based on lookout tower Hraniční vrch by the city Město Albrechtice. The main goal is to create simplified 3D model and his resulting analysis at various degree of static indeterminateness. The first part contains introduction to history of lookout tower, theoretical introduction to bar, strut frame and limit state, followed by calculation of three various static indeterminate level. In the last part is verification of analytic results by numeric method. Another goal is to create thesis, which will also give a guidence for future solver of more complex 3D strut frame.
|
|
|
Stress-strain analysis of artery with atheroma
Janík, Rostislav ; Fuis, Vladimír (referee) ; Burša, Jiří (advisor)
This master thesis analyses stress and strain of iliac artery with atheroma. Model of artery is created as 3D and symmetric in the longitudinal cut. The first part of the thesis deals with a research, which includes obtaining information from medicine, which is necessary fort the right solution of the task. Next part dedicates to nonlinear mechanics, constitutive modeling from the view of biomechanice and computational modeling of arteries. In the next part is made analysis for load on artery by increased blood pressure. In the end were specified uncertainties of the used model and evaluated chance of atherosclerotic plaque rupture.
|
|
|
Seismic resistance of the proposed pipeline route
Čapičík, Martin ; Nížňanský, Ľubomír (referee) ; Fuis, Vladimír (advisor)
The main goal of this thesis is seismic analysis and evaluation of given pipe line. In the first part we offer an overview of the modern seismic analysis methods utilized in nuclear power plants. In the following part we discuss the process of calculating of an assigned pipe line by means of equivalent static method in FEM Software Ansys 13. Based on the outcome we picked the least favourable load cases, which provided input data for determination of coefficients of safety and HCLPFMO34. Finally, the least favourable results are compared using the volume-solution and the analytical beam model in the Mathematica 8 software.
|
|
|
Stress-strain analysis of the mast in Lelekovice
Vitouch, Matěj ; Vaverka, Jiří (referee) ; Fuis, Vladimír (advisor)
This bachelor thesis is focused on stress and deformation analysis of 3D strut frame. The main goal of this thesis is to create model of strut frame, which is based on TV transmitter in Lelekovice, and his resulting analysis at various degree of static indeterminateness and loads. There is also verification of analytic results by numeric method in Ansys Workbench.
|
guest ::
