|
|
Energy Optimization and Operation of Public Lighting
Houdek, Michal ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
An objektive of this university graduation work is an essay about any possibilities for energy savings with operation optimalization of public lightings. Understandings and introduction operation problems of public lighting is devote in first part of this work. Here we can chapters as Importance of public lightings or Gulations and norms in ralation to public lightings. The bigist and special attention is concentrated to description to public lightings systems and it is basic components. Another main part of this work is demonstration of used systems that are leading to energy savings for public lightings. These problems are detailed and explained in chapter Regulation of public lighting systems. This graduation work is describing individual types of regulation with the systems that are used with these regulatios in systems of public lightings. The assignment of last part of graduation work was to make sample calculation of energy demand and calculatin of yearly consumption on exemplary temporary system of public lightings. For this occasion was extra special auxiliary application sytem set up inside the Microsoft Excel program where all individual calculations were done.
|
|
|
Design of the calibration box
Šácha, Tomáš ; Motyčka, Martin (referee) ; Škoda, Jan (advisor)
The diploma thesis deals with the description of basic photometric quantities, light sources and their parameters. The work also describes the LumiDISP luminance analyzer, for which the calibration box is designed. The next part of the diploma thesis deals with the design of the calibration box in the Inventor program and later the simulation of the calibration box in the Ansys Speos program. The simulations in Ansys Speos led to the determination of the number of light sources in the calibration box, which were then used for production. The work also describes the procedures and partial parts of the design and production of the calibration box, including its revitalization and testing.
|
|
|
Photobiological Safety of luminaires and Light Sources
Štěpánek, Jaroslav ; Bendová,, Zdeňka (referee) ; Vik,, Michal (referee) ; Škoda, Jan (advisor)
This doctoral thesis called “Photobiological safety of luminaires and light sources” has focused on an optical radiation and its relation to human body. The thesis describes possible consequences on living tissue during excessive exposure to optical radiation. Among others the work deals with the light source, lamp and optical devices evaluation in dependence of photobiological safety. There is created a method of light source evaluation procedure for photobiological safety in accordance with ČSN EN 62471. The meaning of this procedure is based on its hazard calculation from measured values of irradiation to different photometric distances. Validity of procedure is verified by light source measuring, in which visual angle and photometric distance have been changed. There we can also find an application of this procedure in the UV source evaluation, which helps to determine a safe distance away from UV sources not to create any danger. The evaluated UV sources include a UVA luminaire with a dominant wavelength of 365 nm or an arc of an electric welder. The thesis also describes a method of evaluating light sources for blue light hazard for an aphakic and pseudophakic eye. This method can also help to determine the hazard for the eye without lens or with some implanted lens. Furthermore, there was developed the method of the blue light hazard assessment depending on the age of an exposed person. In terms of the work there was also created a computer programme evaluating photobiological safety resulting from the spectral data having been stored in the library programme or from spectroradiometric measurement data. The work also marginally deals with the topic of circadian rhythms, which are closely related to photobiological manifestation in an human body. Above all the work compares light sources for which equivalent illuminances are calculated, consequently light sources have the same effect on suppressing the melatonin hormone production.
|
|
|
The development of electrodeless fluorescent lamps and their applications in lighting
Šenk, Tomáš ; Škoda, Jan (referee) ; Krbal, Michal (advisor)
The aim of this thesis is more familiar with electrodeless fluorescent lamps. In work is on introduction to the historical development of electrodeless fluorescent lamps, as is explained by their principle of operation and briefly discussed three basic design of these light sources. Subsequently there is mentioned some unique characteristics of electrodeless fluorescent lamps, which are different from other commercially available light sources. After explaining some light - technical variables. The work also provides a comparison of the parameters electrodeless fluorescent lamps with other available light sources. Further there are listed detailed parameters of several types electrodeless fluorescent lamps available in the Czech Republic. A description of possible applications in various types of light fitting. The next section describes the ballast system needed to supply the light sources. Below it is shown and described several start-up characteristics of the luminous flux of different types of electrodeless fluorescent lamps and various levels of compensation current drawn by induction lamps. There are also some parameters of available ballasts systems. Furthermore, given the possibility of applying electrodeless fluorescent lamps in extreme conditions. The conclusion is stated measurements of several cross characteristics of electrodeless fluorescent lamps.
|
|
|
Lighting system reconstruction in the Sokol hall
Kattauer, Jakub ; Štěpánek, Jaroslav (referee) ; Škoda, Jan (advisor)
The thesis is focused on the problems of illumination of interior space, especially in object in Moravský Písek. The thesis is divided into two parts, where the first part deals in general with the basic quantities and terms which are used in illumination systems. Further, it is about general properties of lights and about general terms of illumination of interiors. The second part is only practical character. At the beginning, there is used manual measurement and modelling to evaluate initial state in program Relux. The measurement is not met in terms of standards. Thanks to the municipal council of Moravský Písek a new lighting system is created, which fully respects the valid normative regulations. Installation of control system of lighting is integrated to proposal, which would result in lower consumption, greater user comfort and greater versatility in the possible use of the object. In the end, there is financial evaluation of illuminating system and comparison classical with led technology.
|
|
|
Luminance scanning of luminaires and light sources
Ševčík, Ondřej ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
Práce se zabývá měřením křivek svítivosti světelných zdrojů a svítidel konvenčními a nekonvenčními metodami. Úvodní část práce je věnována popisu zrakového systému a základních fotometrických veličin. Hlavní teoretická část je zaměřena na popis současných metod měření křivek svítivosti a nových metod měření pomocí jasového analyzátoru. Současně jsou pro jednotlivé metody uvedeny zdroje nejistot, které ovlivňují výsledky měření. Těžiště práce spočívá v návrhu metodiky měření křivek svítivosti z jasových skenů svítidla a následném ověření tohoto postupu vlastním měřením. Dále bylo provedeno srovnání naměřených výsledků navrženým postupem, s výsledky konvenčního měření na goniofotometru s luxmetrem.
|
|
|
The effect of operating position of the light source on the photometric parameters
Šťastný, Jakub ; Štěpánek, Jaroslav (referee) ; Škoda, Jan (advisor)
The theses discusses how operating position and ambient temperature affect electric light sources. For the purposes of this theses, the analysis of light radiation, the description and the principle of taking measurements of light quantities are included. The work also contains the principle of function, construction and parameters of light sources. For each light source a hypothesized impact of the operating position of the light source and the impact of ambient temperature variation on radiated luminous flux are stated. For selected light sources a measurement of the impact of the operating position on the sources’ photometric parameters was taken. The output measurement data are being compared to the theoretical hypotheses. The conclusion of the thesis describes suggested recommendations for the operation of light sources based on both theoretical and practical parts of the thesis.
|
|
|
Near-field photometry
Kutý, Tomáš ; Baxant, Petr (referee) ; Škoda, Jan (advisor)
This thesis is focused on the theoretical and practical introduction to the verification procedures used today for obtaining luminosity curves of lamps. The introduction acquaints readers with the photometric variables. Consequently, it is theoretically described procedure for constructing luminance curves by zonal flow and further familiarization with the near-field photometry. For the practical part was chosen several lights. These lamps were measured by luxmeter first from a very close photometric distance from lights, and then from large distance. The next step was to obtain pictures of luminaries in planes C 0 to 345 ° (with a step of 15 °) of the angle gamma from 0 to 180 ° (in steps of 5 °). The measured data were processed by zonal flow and through programs LumiDISP and Matlab. The partial result of this thesis is to verify whether it is possible to use the luminance analyzer for obtaining luminosity curves, it means, if the luminosity curve obtained through luminance analyzer will comply with the curves obtained through a luxmeter. Further work should ascertain the feasibility of acquired photographs lamps from a very close photometric distance could create luminosity curve for any location and distance from the observer to measured lamps.
|
|
| |
|
|
Photometry and spectroradiometry of LEDs
Vysoudil, Martin ; Škoda, Jan (referee) ; Drápela, Jiří (advisor)
This thesis deals with the processing of light technical parameters and performance of key LED chips for their applications in lighting systems. The aim is to create a laboratory model for measuring the qualitative and quantitative parameters of highly luminous light LED emitted depending on the angle, using a spherical integrator 0.3 m, goniometer and fiber spektroradiometr /luxmeters. Goniometer is designed using modular optomechanical parts company Thorlabs. Due to the current passing through the LED chips heat up considerably. To light LED chip parameters tested were not affected by heat from the chip is required to pay the heat generated by a passive radiator. Another part of this thesis is the reconstruction of an older model spherical integrator. Reconstruction must be undertaken so as to ensure sufficient cooling again tested LEDs. Light scattered in the ball of the integrator is led by the optical cable to the spektroradiometr that are subsequently recorded its parameters. The second element used to measure the light produced by the LED source is photocell. Spherical integrator must be appropriately modified to indicate the two measuring elements and also meet the standards of determining the correctness of measurement. At the end of the measurement results will be compared with catalog values provided by the manufacturer.
|
guest ::
