National Repository of Grey Literature 230 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Preprocessing of sewage sludge for pyrolysis process
Ševčík, Jan ; Rusník,, Igor (referee) ; Bodík,, Igor (referee) ; Hlavínek, Petr (advisor)
The concept of sludge management at the level of sludge treating technology of sewage treatment plants, as well as at national, continental or world level, requires fundamental improvement in the interest of sustainable development. Sewage sludge production is continuously increasing. Sewage sludge contains a number of pollutants but also a significant renewable resource for material transformation and / or energy recovery. Sewage sludge is composed of an inorganic mineral part and organic components. Its organic part is a source of energy and nutrients, but also contains harmful pollutants for exapmple heavy metals. However, there are technologies that offer the possibility of neutralizing pollutants while using other sludge components in terms of recycling energy, nutrients and other attractive sludge components. The mentioned technologies include mainly thermal methods of sewage sludge treatment and one of them is pyrolysis. Thessis focuses on sewage sludge prepartation for pyrolysis process, which includes mixing with additives and peletization of prepared mixture for purposes of agricultural or energetical utilisation. Technology for material transformation and energy utilization of sewage sludge, in particular the mentioned pyrolysis or torrefaction, require an insignificant degree of detailed research in order to expand it in the field of sludge management. Indeed, it is not only research that will enable direct correct use of this technology in practice. The results of such research are the basis for the drafting of the relevant legislation, which will subsequently enable the deployment of pyrolysis technologies in practice.
Inhibition of Hazardous Compounds in Alumino-Silicate Systems
Koplík, Jan ; Škvára, František (referee) ; Rovnaníková, Pavla (referee) ; Havlica, Jaromír (advisor)
The ability of alumino-silicate systems to immobilize hazardous compounds has been investigated since 1990s. The aim of this work is to develope alumino-silicate system (matrix) based on industrial waste products with ability to immobilize hazardous compounds (heavy metals). This ability of the matrix was confirmed by leaching tests based on the law 294/2005 Sb. Concentration of heavy metals in leachates was determined by ICP-MS method. Alumino-silicate system prepared in this work consists of high-temperature fly ash and blast furnace slag activated by mixture of alkaline activators (hydroxide and water glass). Matrixes were characterized by suitable analytic methods (XRD, SEM, FT-IR, DTA-TGA-EGA). The same analytic methods were used to describe the mechanism of immobilization of selected elements (Ba, Cu, Pb) in prepared systems.
Study of road dust pollution using ICP mass spectrometry
Chalabala, Jan ; Komendová, Renata (referee) ; Vašinová Galiová, Michaela (advisor)
Nowadays, there are many studies focused on road dust as a matrix of interest because of its ability to accumulate contamination with contribution from road traffic. This master thesis is turned into study of road dust pollution from aglomeration of Ulaanbaatar, capital city of Mongolia. There are 113 samples devided on nine sets corresponding to major roads in Ulaanbaatar. Samples have been sieved on three size fractions and then decomposed by aqua regia. Middle size fraction 45–63 µm has been analyzed using ICP-MS mass spektrometry. For purposes of contamination assesment, analyzed elements have been devided into two groups: contaminants (Cr, Cu, Zn, Pb and As) and rare earth elements (REE). Measured contents for elements have been compared with values of geochemical backgroud. Firstly for each set of samples and secondly for each sampling point. For first group of elements (contaminants), antropogenic contamination have been found, especially in the centre of Ulaanbaatar. As a probable source of this contamination, road traffic for Cu, Zn and Pb and coal combustion for Pb a As, have been identified. For REE group hasn´t been found any antropogenic enrichment.
Thick-film sensors for heavy metals detection
Gajdoš, Libor ; Majzlíková, Petra (referee) ; Prášek, Jan (advisor)
This project describes the possibilities of heavy metals detections in solutions using differential pulse voltammetry with tree-electrode electrochemical thick-film sensors. In the theoretical part, the thick-film technology is described as well as thick-film pastes’ types and compositions, followed by introduction to electrochemistry and electro-analytical methods of measurement. This project also describes the three measured heavy metals – cadmium, lead and copper. In the practical part, heavy metals’ ions detection in solutions using carbon working electrode and determination of the detection limit and sensitivity are described and discussed. Finally the evaluation of obtained results and results comparison to hygienic limits are included.
Monitoring of water and sediments contamination after uranium ore mining
Kurfürst, Vlastimil ; Komendová, Renata (referee) ; Čáslavský, Josef (advisor)
This paper deals with the monitoring of water contamination and sediments in the area of Olší - Drahonín. Firstly, the water contamination released into the river Hadůvka is evaluated. Secondly, the sediments in the river are monitored and the surface water flow is evaluated. Finally, the water treatment technology and sampling is described. A description of the separation methods and choice of standard methods is outlined.
Heavy metal contamination of selected Brno city localities
Šebková, Michaela ; Sommer, Lumír (referee) ; Dočekalová, Hana (advisor)
The aim of this work is to study the soil and plant contamination by heavy metals (lead, cadmium and mercury) in five selected places of Brno city. The sampling place Opuštěná represents the heavily polluted locality with high traffic density situated in the city centre. Sampling places Vídeňská and Podstránská belong to medium polluted localities, that are situated close to frequented roads. Relatively clean localities are represented by Musorgského and Šrámkova places, which are situated in peripheral city district with smaller traffic density. Soil and plants were sampled at two time periods (November 2008 and January 2009). Average amounts of mercury, cadmium and lead in collected soil samples are lower then limits of the Directive number 13/1994 of the Code of Ministry of the Environment. The content of heavy metals in soils corresponds to the sampling place. The highest value of metals content was found in the soil sampled at Opuštěná site. The content of lead and mercury in leaves of common dandelion was higher than the content in roots. In the case of cadmium the situation was opposite, the highest content was measured in underground part of the plant. It was found, that the content of heavy metals in leafy and underground part showed only small difference between sampling places. Nevertheless, the locality Opuštěná is found again as the highest contaminated place. Values of pH of collected soil samples were ranged in neutral area between 7 and 7,5.
Carbon nanotubes utilization for fabrication of thick-film sensors electrodes
Polický, Jiří ; Adámek, Martin (referee) ; Prášek, Jan (advisor)
This work covers an area of heavy metals detection by miniaturized thick film sensors. Working electrode of these sensors was fabricated using thick film paste that was prepared as a nanocomposition of carbon nanotubes powder, suitable vehicle and a thinner. The response of fabricated electrodes to cadmium and lead ions was measured using differential pulse voltammetry in an acetate buffer solution using a three electrode sytem. The results were compared with the carbon electrode made from special commercial thick film polymer paste. Finally the possibility of working electrode surface activation with nitric acid and heavy metals on real biological sample detection is described here.
Hair as a bioindicator of contamination of risk metals
Zmijová, Marie ; Řezáčová, Veronika (referee) ; Zlámalová Gargošová, Helena (advisor)
The use of hair as a bioindicator of environmental contamination by risk elements is becoming more and more common. This bachelor thesis deals with the use of this matrix for analysis using the voltammetric method. It focuses on the optimization of the method for determining the concentration of cadmium, copper, lead and zinc in real hair samples and monitors the effects on the incorporation of these elements into the hair fiber. The presence of zinc and copper was confirmed in all samples analyzed. Cadmium could only be quantified in one sample. The effect of gender and age on the concentration of elements has not been demonstrated. Concentration of lead has been linked to smoking, with higher concentrations found in smoker’s hair than in non-smoker’s.
Monitoring of selected metals in comercial bio wines
Bortlová, Alžběta ; Reichstädter, Marek (referee) ; Pořízka, Jaromír (advisor)
This bachelor thesis is focused on monitoring of selected metals in commercial organic wines. The aim of this thesis was to compare element content of organically produced wines with wines originating from other agrotechnical production system. Optical emission spectrometry with inductively coupled plasma (ICP-OES) was used for element analysis of wine. Statistical method analysis of variance has been used to assess whether the concentrations of the elements showed statistical differences between wines originating from organic production and wines originating from other production systems. Statistical differences were found in 3 of 20 analysed elements. Correlations between the element analysis and type of production system of grapevine were observed in content of the zinc, nickel and manganese.
The presence of pollutants in matrices of bioindicators
Vlček, Ladislav ; Vávrová, Milada (referee) ; Doležalová Weissmannová, Helena (advisor)
This master‘s thesis concerns with occurrence of heavy metals in the environment, mainly in the matrices of bioindicators. Special attention is given to occurrence of mercury in the environment and its quantification in bioindicators. Mercury and its compounds are today considered as one of the most significant contaminants in the environment. Some sorts of mushrooms cumulate sizable amounts of mercury in their fruiting body and therefore we can use them to consider loading of different areas. Eight areas in Vizovice and its surroundings were chosen for these purposes and during the years 2006 – 2008 harvested 50 samples from 19 sorts of mushrooms from there. The concentrations of Hg were determined in all samples by single-purpose absorption spectrometer AMA 254. Comparison of the mercury content between individual sorts of mushrooms in the same area as well as comparison of loading of areas was performed and also bioaccumulation ability of individual sorts of mushrooms was determined.

National Repository of Grey Literature : 230 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.