National Repository of Grey Literature 21 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Production of the "Cover" component
Král, Lukáš ; Ohnišťová, Petra (referee) ; Žák, Ladislav (advisor)
The thesis proposes the production design of a cover component used as a ventilator cover of a water pump. In compliance with the studied literature, the cover will be made from polypropylene using the injection moulding technology. Based on the technological calculations, it puts forward a complete double mould with a cold inlet. The design solution was verified by simulations of filling and cooling, and a suitable injection machine was selected as per the calculated parameters. Finally the thesis explores the possibility for defects and presents the technical-economic evaluation for the entire production.
Design and optimization of a low beam LED headlamp reflector
Varhaníková, Alžbeta ; Kapusta, Martin (referee) ; Novotný, Jan (advisor)
The diploma thesis deals with the optical design of low beam LED reflector. The thesis aims to optimize the existing low beam LED reflector with an emphasis on achieving a legal and homogeneous light distribution. The theoretical part contains the essay of light sources and optical systems used in headlights, as well as the description of the production technology of LED reflector for different polymeric materials. The experimental part presents a detailed methodology for the optical design of low beam LED reflector in the company software. The thesis also contains a description of the original low beam LED reflector and its problematic parts. The optimization of LED reflector was performed by changing its construction and by the replacement of the light source which increased the robustness of the whole system. In the conclusion, the optimization of LED reflector is evaluated by comparing final light distributions for individual LED reflectors.
Production of prototype mold parts using rapid prototyping methods
Kaloda, Vít ; Slaný, Martin (referee) ; Zemčík, Oskar (advisor)
The diploma thesis pointed out the possibility of using rapid prototyping methods in the field of plastic injection, specifically to make shaped inserts into the injection mold. The universal frame of the injection mold was used and only the shaped inserts were changed. The main part of the work was the construction of an injection mold with the subsequent practical production of shaped inserts for a specified part. In the introductory part, a theoretical search was performed, about which production methods in combination with suitable materials could be theoretically used. Furthermore, the polyjet and DLP methods were chosen, which were used to produce components (core and cavity). The result of the diploma thesis was a summary of all parameters, comparison of materials and production methods. Polypropylene and polyamide 6 materials were injected into the injection mold, from which the first prototype products were made. Instructions for the production of shaped inserts with the recommended technology and material were created for the selected type, which could be used in practice.
Production of part Fixing washer
Para, Marcel ; Kandus, Bohumil (referee) ; Žák, Ladislav (advisor)
Order was given for the prodiction of 20 000 pieces of fixing washers. In this case was chosen injection moulding technology. Based on the research, a structural design of the mold was prepared together with the drawing documentation. From the range of materials, it was chosen polypropilene MOSTEN GB218, which is suitable for the given produstion. The simulation verified the reliability and quality of production. The parameters of injection moulding were determined by calculations, and the machine J180ADS – 180U was selected base of them. In the economic evaluation, the total costs for the production of the entire series were established on Nc=19626,43€.
Production technology of plastic parts for automotive industry
Šobáň, Jakub ; Ohnišťová, Petra (referee) ; Žák, Ladislav (advisor)
The diploma thesis presents a production technology design of an automotive industry component – a resonator holder. The initial production run of the part is 500 000 pcs. Injection production has been selected based on variant analysis of available technologies. Technological calculations have been performed. The selected material PP 56M10 will be used for operation in granules. A quadruple shaped cavity injection mold with a tunnel gate has been designed. Based on estimated technological properties an Arburg Allrounder 470 A machine has been selected. The break-even point (BEP) shows economic return at the production of 185 595 pcs.
Scrap Analysis in Manufacturing Process
Buriánková, Alena ; Blecha, Petr (referee) ; Bednář, Josef (advisor)
The master’s thesis is focused on the reduction of rejection rate in production of plastic bowls with the use of statistic methods. The theoretical part of this thesis describes among others Statistical Process Control, Process capability and types regulatory diagrams. The basis for the practical part is data collection over a certain period of production, from which the percentage of the rejection rate is evaluated. Experiments and corrective actions are designed to improve the process and thereby reduce scrap.
Plastics Processing Technology
Kubíček, František ; Kandus, Bohumil (referee) ; Žák, Ladislav (advisor)
This work is a literary research focused on plastics processing technologies with emphasis on injection moulding technology. From this field it is focused on materials suitable for injection moulding, moulding machines and parts of it, injection moulding process, defects emerging because of wrong optimalization of injection moulding process and special techniques of injec-tion moulding.
Design of injection molding cooling insert for manufacturing by Selective Laser Melting
Tekeľ, Richard Martin ; Vrána, Radek (referee) ; Koutný, Daniel (advisor)
This bachelor thesis focus on design of a cooling insert so the current mold cycle time will be reduced and it will be possible to manufacture the insert by SLM. Proposed modification includes 1 cooling line with non-circular cross section and disrupt empiric cooling line design recommendations. A research into differences of conventional and additive manufacturing of injection moulding inserts was conducted as well as into theoretical principles needed for a design of cooling lines and preview of similar solutions for the given task. After simulation of current state and obtaining a value of current cycle time, 3 different designs of cooling line were chosen and simulated in order to pick the most suitable one. This cooling design was afterwards modified to get conformal shape and lower distance from critical spot. The last part of thesis interpret the results from simulation of the final cooling line design and estimation of safety against fatigue failure.
Influence of the MuCell technology parameters on the mechanical properties of polymers for injection moulding
Suchánek, Matěj ; Věchet, Stanislav (referee) ; Válka, Libor (advisor)
This master’s thesis deals with influence of gas content in structure of polymer materials to mechanical properties. Test specimens were prepared by MuCell technology from polyphthalamide reinforced by 50 % of glass fiber content. The theorethical part of this thesis is focused on polymer materials with attention to polyamides and injection moulding technology. In the experimental part, the dependence between the characteristics obtained from the tensile test and the Charpy impact test on the amount of gas in the polymer is examined.
Production Concept of Injection Moulds for Plastics
Hrdlička, Martin ; Sliwková, Petra (referee) ; Sedlák, Josef (advisor)
The Bachelor's thesis, written during the study of B-STG Manufacturing Technology, is focused on the production concept of injection mould for plastic components. It includes a description of the technology of injection moulding and the function of the individual parts of the injection mould. Further it analyses the production concept that contains the production process steps and the operating instructions. The conclusion of the thesis is devoted to the technical and economic evaluation of the concept.

National Repository of Grey Literature : 21 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.