National Repository of Grey Literature 22 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
Determination of selected elements in cereal flours and their gluten-free alternatives
Venclová, Veronika ; Hraníček, Jakub (advisor) ; Nováková, Eliška (referee)
This study deals with the determination of calcium, magnesium, phosphorus, potassium, sodium, iron, zinc, copper, manganese and molybdenum in cereal gluten flours and its gluten-free alternatives. The flour samples were digested using a microwave device and the elements in solution were subsequently determined using an inductively coupled plasma mass spectrometer. Optimization of the digestion of the selected flours was performer prior to the actual determination of the elements. The aim of the work was to determine the above listed elements in the flour samples and to establish a basic overview of the elemental composition of the different flours. This overview and comparison of the different flours is intended to help the people with celiac disease to choose gluten-free alternatives to wheat flour. Keywords Inductively coupled plasma mass spectrometry, microwave digestion, calcium, magnesium, phosphorus, potassium, sodium, iron, zinc, copper, manganese, molybdenum, wheat flour, gluten-free flours, celiac disease
Reduction of polyatomic interferences in As and Se determination by ICP-MS
Vajnahij, Volodymyr ; Nováková, Eliška (advisor) ; Hraníček, Jakub (referee)
This bachelor thesis was focused on the eliminationof polyatomic interferences in the determination of As and Se using inductively coupled plasma mass spectrometry. For this purpose, the collision-reaction cell technique was employed. The collision-reaction cell was filled with either collision gas or collision-reaction gas, namely pure He and H2, at different flow rates.In the case of the determinationof arsenic,which is monoisotopic and therefore no isotope other than 75 As can be selected, one of the main polyatomic interferences is 40 Ar35 Cl+ , which has the same mass-to-charge ratio m/z = 75 as 75 As. In the case of selenium determination, there are isobaric interferences due to 40 Ar38 Ar+ , 40 Ar40 Ar+ and 38 Ar40 Ca+ affecting the measurement of 78 Se and 80 Se. When 78 Se was determined in the He mode with 5 ml ∙ min-1 , a 300-fold decrease in BEC was observed. At the same time, this collision gas flow rate is higher than the routinely used one and thus able to remove more polyatomic interferences caused by 40 Ar38 Ar+ and 38 Ar40 Ca+ , respectively.Aslight improvement in some parameters was also achieved by using the H2 mode, which is more effective in reducing polyatomic interferences in the determination of Se than the He mode. With the removal of argide interference, H2 reaction...
Elemental analysis of dendrochronological Norway spruce sample
Zámečník, Karel ; Hraníček, Jakub (advisor) ; Kozlík, Petr (referee)
The subject of this bachelor's thesis is the determination of lithium, sodium, magnesium, potassium, calcium, manganese, iron, zinc, selenium, rubidium, strontium, cadmium, antimony, cesium, barium, and thallium in dendrochronological samples of Norway spruce using inductively coupled plasma mass spectrometry. The samples of the Norway spruce were collected in the autumn of 2018 on the southern slope of hill Melechov in the Vysočina region. The stem sample was first divided into pieces according to the distance from the bark and labelled A1a to A1g. The ash sample was obtained by burning a cross-section of the stem and separating the bark, from which the A3b sample was created. The remaining two samples were made up of needles and twigs and labelled as samples E and F. For elemental analysis, the samples needed to be converted into a solution, which was achieved by dissolving them in a mixture of hydrochloric, nitric, and hydrofluoric acid, using a microwave digestion device. After dissolution, a solution of boric acid was added to each sample solution to complex any unreacted hydrofluoric acid, which could damage the internal components of the ICP-MS. Calibration solutions were then created with concentrations of 0,0016; 0,008; 0,04; 0,2 and 1,0 mg/l from stock solutions containing the analysed...
UV-photochemical generation of volatile species of tellurium and other transition metals
Jeníková, Eva
This dissertation thesis is focused on UV-photochemical generation of volatile species of tellurium, ruthenium, rhenium and iridium coupled to methods of atomic spectrometry. In the first part, attention was paid to the optimization of parameters of UV-photochemical generation of volatile tellurium species and its application for speciation analysis of Te(IV) and Te(VI) in water samples. UV-photochemical generation was carried out in a UV-photoreactor, which consisted of a low-pressure mercury lamp wrapped with a polytetrafluoroethylene reaction coil that served as a reactor. Atomic absorption spectrometry with a continuum source of radiation and high resolution and atomization in a miniature diffusion flame were used to optimize the conditions of generation, which included the composition of the reaction medium, irradiation time and the addition of transition metals as modifiers. In order to achieve a higher sensitivity of determination, the generator was coupled to a triple quadrupole inductively coupled plasma mass spectrometer. Since efficient UV-photochemical generation of volatile species was achieved only from Te(IV), with no response from Te(VI), the feasibility of this technique for simple "non-chromatographic" speciation analysis was tested and a method for determination of Te(IV) and...
UV-photochemical generation of volatile species of tellurium and other transition metals
Jeníková, Eva ; Hraníček, Jakub (advisor) ; Šíma, Jan (referee) ; Kanický, Viktor (referee)
This dissertation thesis is focused on UV-photochemical generation of volatile species of tellurium, ruthenium, rhenium and iridium coupled to methods of atomic spectrometry. In the first part, attention was paid to the optimization of parameters of UV-photochemical generation of volatile tellurium species and its application for speciation analysis of Te(IV) and Te(VI) in water samples. UV-photochemical generation was carried out in a UV-photoreactor, which consisted of a low-pressure mercury lamp wrapped with a polytetrafluoroethylene reaction coil that served as a reactor. Atomic absorption spectrometry with a continuum source of radiation and high resolution and atomization in a miniature diffusion flame were used to optimize the conditions of generation, which included the composition of the reaction medium, irradiation time and the addition of transition metals as modifiers. In order to achieve a higher sensitivity of determination, the generator was coupled to a triple quadrupole inductively coupled plasma mass spectrometer. Since efficient UV-photochemical generation of volatile species was achieved only from Te(IV), with no response from Te(VI), the feasibility of this technique for simple "non-chromatographic" speciation analysis was tested and a method for determination of Te(IV) and...
Determination of selected heavy metals in samples of great tits feathers by inductively coupled plasma mass spectrometry
Adamová, Simona ; Hraníček, Jakub (advisor) ; Kozlík, Petr (referee)
EN As a result of human activity, a number of polluting substances are released into the environment. Heavy metals are one of the types of these contaminants. Their accumulation in the environment can have a negative impact on living organisms, including humans. For this reason, environment quality monitoring has become an important activity. Great tit (Parus major) can be a suitable bioindicator of the level of environmental contamination by heavy metals, which is acceptable mainly due to its abundance and occurrence in the vicinity of human settlements. This diploma thesis deals with the determination of six selected heavy metals in feather samples of these songbirds from several parts of the Czech Republic and other European countries. High pressure microwave mineralization in the presence of acids was used to prepare the samples. Selected heavy metals were determined using inductively coupled plasma mass spectrometry (ICP-MS) technique, which is also suitable for ultratrace analysis due its very low limits of detection.
Determination of lead and zinc in great tits blood
Greguš, Viktor ; Hraníček, Jakub (advisor) ; Nováková, Eliška (referee)
EN Determination of heavy metals in urban living passerine birds organism has been considered as suitable method for monitoring pollution of human enviroment which these elements can cause. This study deals with determination of zinc and lead in dried great tits blood samples using inductively coupled plasma-mass spectrometry technique. Dried blood samples were weighed, solubilized in nitric acid and hydrogen peroxide and microwavelly digested. Calibration standards for determined elements were prepared and basic analytical characteristics of the measurement were determined. Matrix interference was examined by measuring the recovery of element determination presented as a ratio of the slope of standard addition to the certified reference material of whole blood sample and the slope of external calibration.
Crystal chemistry of micas from České středohoří
Goll, Jan ; Skála, Roman (advisor) ; Ulrych, Jaromír (referee)
Six methods have been used to study micas from České středohoří mts.: X-ray difractometry (transmission and reflection), ICP MS, electron microprobe, Mössbauer spectroscopy and termogravimetry. The measurements of trace elements and REE's revealed very low tendency by normalization on chondrite reservoir and primitive mantle. Micas show high contents of TiO2 (9,47 wt.%) and BaO (up to 2,1 wt.%) in separated grains from rock. The micas classifications were determined by Tischendorf (2007) and Rieder (1998) as Fe-phlogopites. X-ray powder diffraction revealed cell dimensions and a common polytype 1M with space group C2/m. By Mössbauer spectroscopy have been studied the rates of Fe2+ /Fe3+ and they were 1,08 - 1,86 (except rock sample, which were 9:1). Termogravimetrical measurement until 1450řC revealed weight jump from 1120řC to 1270řC.
Photochemical vapor generation of rhenium with a detection by inductively coupled plasma mass spectrometry
Hašlová, Karolína ; Musil, Stanislav (advisor) ; Nováková, Eliška (referee)
This bachelor thesis deals with an optimization of the conditions of photochemical vapor generation of rhenium with detection by inductively coupled plasma mass spectrometry. Photochemical vapor generation was realized using an ultraviolet irradiation in a high-efficiency photochemical reactor with an inner reaction channel from a formic acid based medium in presence of reaction modifiers. Optimizations of parameters affecting the generation efficiency was implemented step by step - reaction medium flow rate (irradiation time), formic acid concentration, addition of acetic acid and reaction modifiers (transition metals) and carrier gas flow rate. The addition of an appropriate combination of reaction modifiers - cadmium(II) and iron(II) ions, had a key impact on photochemical generation of volatile species of Re and led to more than 40-fold increase in generation efficiency. A further (2-fold) increase in generation efficiency was achieved by wrapping the high-efficiency photochemical reactor with an aluminum foil, probably due to more efficient irradiation of the sample in the generator. The limit of detection and quantification were determined as 0.24 ng dm-3 and 0.80 ng dm-3 Re, respectively. The repeatability of the method 100 ng dm-3 Re was 4.8%. Key words photochemical vapor generation,...

National Repository of Grey Literature : 22 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.