|
|
The Study of Productions Operation Management
Petřek, Martin ; Kouřil, Karel (referee) ; Jurová, Marie (advisor)
The thesis dwells about methodics of processing an order in the company: Hardening shop Frydrych s.r.o. while respecting all the demands on the technological process of thermal and thermo-chemical manipulation as annealing, tempering and cementing. On the bases of the analyse and documental procedures the thesis is unraveling a concept for elimination of absences in the sphere of processing the order also as booking, invoicing and evaluating.
|
|
|
Roller-burnishing technology as finishing oparation.
Sekerka, Vít ; Sedlák, Josef (referee) ; Zemčík, Oskar (advisor)
This bachelor thesis deals with chipless finishing operation of roller-burnishing. It explains and describes basic ideas concerning finishing and hardening of machine components by means of roller-burnishing, parting of tools, application in manufacturing and techno-economic usage. Own project, which deals with rollerburnishing of inside conic surface, is part of the thesis too.
|
|
|
Optimization of heat treatement process for alloyed case hardenening steel
Roubalová, Jana ; Pantělejev, Libor (referee) ; Jan, Vít (advisor)
This bachelor’s thesis deals with the assessment of the influence of heat treatment on the microstructure and mechanical properties of medium alloyed steel 18CrNiMo7-6. The work contains assessment and further proposal of suitable austenitizing temperature for heat treatment. To select the optimal variants of heat treatment five different temperature modes were tested. The theoretical part describes the various methods of heat treatment, with a focus on medium alloyed steels. The practical part presents microstructure of the evaluated steel, its hardenability and hardness depending on the temperature regime of treatment.
|
|
|
Machining of hardened parts
Havlík, Daniel ; Osička, Karel (referee) ; Polzer, Aleš (advisor)
This bachelor thesis is focused on the machining of hardened parts. The beginning of the work is devoted to the analysis of specific materials, 42CrMo4, 42CrMoS4 and 50CrMo4. Next described thing is heat treatment. The main part of this work consists of theoretical analysis turning of hardened parts and theoretical analysis of the thread whirling of ball screw, where the principle of ball screws is also described.
|
|
|
Influence of Homogenizing on Mechanical Properties of AZ91 Alloy
Provazníková, Andrea ; Liškutín, Petr (referee) ; Věchet, Stanislav (advisor)
This bachelor thesis includes photos and graphic representations of the influence of heat treatment on the mechanical properties of magnesium alloy AZ91. The structures of the alloy are recorded on the light microscopy pictures as well as photographs taken using a scanning microscope of fracture areas in the material. Results of a Tensile Test determining the strength and plastic properties and measuring of hardness and microhardness of the material are also included.
|
|
| |
|
|
Evaluation of upsetting test
Vávra, Roman ; Císařová, Michaela (referee) ; Řiháček, Jan (advisor)
This work is focused on theoretical and practical processing upsetting test. There is an explanation of their significance in engineering. Also, there are described various kinds of tests and their evaluation. Furthermore, the work deals with the experiment for a specified material MS 68. This material was compacted using two test machines equipped with measuring software. First machine is a hydraulic press CZR 600 with software DEWESoft and the second is a universal testing machine ZD 40 using software M-Test. An evaluation based on the collected data is included in the form of deformation resistance curves of tested material.
|
|
|
Analysis of Circular Bars Shearing Process
Dohnalová, Eva ; Hůlka, Jiří (referee) ; Foret, Rudolf (advisor)
In these days customers require a high quality as well as precision of products together with a cost that is as low possible. The cost of products can be reduced in a way of batch production. Implementation of the batch production requires a detailed plan of a technological process to avoid making depreciated products or series of products. A software package can be used to simulate the technological process of shearing to avoid difficulties of particular technological process. This bachelor paper contains analysis of technological process of shearing of circular section rods. The results of the analysis are going to be included in FEM simulations. The effect of the technological process of shearing on material was determined by optical and scanning electron microscopy method. The microhardness measurement was used to analyse the deformation hardening of the examinated material.
|
|
|
Tube Flaring Technology under Dynamic Conditions
Macháček, David ; Forejt, Milan (referee) ; Peterková, Eva (advisor)
This master thesis is divided into three main parts. In first part is more closely described the method of tube flaring. Tube flaring was chosen for analysis of biaxial stress, in this thesis particularly in the presence of high strain rate. In the second part is more closely described influence of high strain rate on the forming process. There is described influence of high strain rate on behavior of the material, hardening, change of quasi-static yield strength to the dynamic yield strength, influence of high strain rate on the microstructure and more. During the description of these processes there is effort to describe the cause of these changes as well. For this task was used domestic and foreign literature, as well as peer review papers whose authors study intensively this problematic. Besides all of the above there is also derived the velocity of elastic and plastic wave. In the end is evaluated experiment, in which was done tube flaring, which is part of this master thesis. Results from the 3D optical system ARAMIS are interpreted with the help of Microsoft Excel, where the chosen results were used as the input to the equations modified for the dynamic loading.
|
|
|
Analysis of cracking of aluminium profiles during bending process
Kalivoda, Ondřej ; Šebek, František (referee) ; Vosynek, Petr (advisor)
The presented thesis was created in cooperation with Siemens, s.r.o. and deals with the analysis of the bending of aluminium sheets. These products are used as conductors of electrical energy. The problem happened when the bending angle was 90 ° when there was a violation outside of the bend. The aim of the thesis is to verify whether the bend is correctly designed using analytical and empirical relations and the finite element method. Because of the requirement for running numerical simulation on one of the freely available software the Salome Meca program environment was used. The results of numerical simulation did not confirm that the violation should occur. In deeper analysis appeared doubts whether it is possible to correctly evaluated result only by data from tensile test. In the final part, there are recommended some experiments which would be necessary for the correct calibration of the ductil fracture criteria.
|
guest ::
