|
|
Usage of LabView in the field of switchgears.
Karpeta, Petr ; Huzlík, Rostislav (referee) ; Valenta, Jiří (advisor)
My aim in Bachelor`s project is familiarization the problems of development environment and LabVIEW measurement card DAQCard-6036E. The implementation of this program in industry, the map application in the field of measuring performance, data collection and automation of electric appliances. Another important point is the basic description of the controls palette of instruments and creating a new program for virtual instrumentation and simulation. Because using a virtual programming language from National Instrument on measured dynamic characteristics of the electrical arc, closer to students and other readers the theory arcs of alternating electric current. Describe the emergence, speeches and behavior of electric arc in atmospheric pressure and normal temperature laboratory room. Provide basic knowledge of the influences acting on burning electric arc and how these effects distort the ideal dynamic characteristics. A proposal for measuring the dynamic characteristics of electric arc in the LabVIEW environment. To measure several volt-ampere characteristics with card DAQCard- 6036E and also been measured in these courses in the current and voltage measurement circuits. Measurement is performed on the product with two carbon electrodes in the vertical arrangement. The result will be a measured dynamic voltampere characteristics with measured data in the form of tables and graphs.
|
|
|
The arc extinction in electrical apparatuses
Karásek, Ladislav ; Valenta, Jiří (referee) ; Bušov, Bohuslav (advisor)
My bachelor’s thesis is focused on theoretical analysis of the issues of switching arc in electrical devices, introducing successful quenching principles in present devices and the practical part of thesis is focused on innovation of lab exercises „Static V-A characteristics of DC (direct-current) arc and dynamical V-A characteristic of AC (alternating current) arc“, which is part of the course Electrical Devices. Part of the bachelor´s thesis is practical measuring of DC and AC arc, construction of static and dynamic characteristics and its subsequent reviews. The last part of my bachelor´s thesis is focused on innovation of this lab exercis
|
|
|
Influence of welding direction on depth of penetration for MAG method
Šmak, Radim ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
This bachelor thesis deals about Influence of welding direction on depth of penetration in S 235 JR steel for MAG welding. First theoretical part of the thesis was devoted to a description and technology of the chosen method. In the second practical patr of the thesis was designed optimal welding parameters and conditions of welding. Based on them was performed an experiment. From the experiment was detected the depth penetration, heat affected zone and structure of the metal.
|
|
|
Idea design of experimental model for LV electric arc properties investigation
Fazekas, Tibor ; Valenta, Jiří (referee) ; Vávra, Zdeněk (advisor)
The aim of the work was a planing of an experimental model for the observation of the low voltage electric arc. The opening part observes the basics of the electric network switching and the electric arc in theory. The next point is definition about the behaviour of the electric arc in the low voltage switching devices, focusing on the movement of the arc along electrodes and in the extinguish chamber. The design of the experimental model, created in Autodesk Inventor 2008, is described in the last part of the work.
|
|
|
Welding of steel C45
Hála, Kamil ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
The aim of this bachelor‘s thesis is to propose a suitable welding parameters for a small part of steel C45. This steel contains a high percentage of carbon and therefore is difficult to weld. Gas shielded arc welding techniques were considered to be used, and from such techniques, the TIG method seems to be the most advantageous one. For this technique were suggested three groups of parameters and the most suitable one was chosen to be used for the production. The option chosen is of a welding power I=40 A and with preheating 200 °C. The component is made in the single-part production in SAAB Czech s.r.o.
|
|
|
Electric arc in the switchgear
Kutal, Ondřej ; Dohnal, Petr (referee) ; Bušov, Bohuslav (advisor)
This thesis focuses on description of creation, properties and behavior of an electric arc in the switchgear. In addition, it focuses on description how an electric arc can be created and how it effects contacts in electrical switchgear. Electric arcs is divided into arc with DC or AC. Quenching of the electric arc supplied by DC is more difficult than in case of AC since the DC does not pass through zero value. For the design of quenching chamber it is important to know the characteristics of the electric arc under both conditions. The behavior of static V-A characteristic of the electric arc supplied by DC was determined with experimental measurements using the equation by Ayrton. Subsequently, measurement of the dynamic characteristics of the electric arc with AC were determined. And the limits values for the emergence of electric arc were measured of. Last, the results wereevaluated and expansion of measurement task was proposed. The numerous influences on the arc were described. In conclusion the thesis extends diagnostic of the arc under the laboratory conditions.
|
|
|
Switching arc plasma diagnostics by usage of two high-speed cameras
Buchta, Martin ; Dostál, Lukáš (referee) ; Valenta, Jiří (advisor)
This bachelor thesis deals with an electrical arc formation and its properties. The thesis also describes some of the electrical devices and principles, which are used for arc extinction. It is mainly focused on design, construction and testing of model of the LV quenching system, which allows high speed cameras to record arc movement. Recorded images are then used to create three-dimensional reconstruction of the electric arc with help of created program 3DMaker. The final reconstruction is the output of this work.
|
|
|
Spectroscopic analysis of an electric arc
Hartman, Tadeáš ; Kloc, Petr (referee) ; Šimek, David (advisor)
The bachelor thesis deals with spectroscopic diagnostics of electric arcs. The first part explains the creation and properties of electric discharges, especially electric arcs. Methods for composition and temperature analysis of electric arcs are also given there. The next part deals with practical use of these methods for identification of elements contained in electrodes between which an arc discharge was happening, measurement of the arc temperature and also measurement of the temperature of the electrodes. In the last part, these methods are also used for the analysis of time progression of composition and temperature of an electric arc created on a contactor's contacts with the resistive load.
|
|
|
Arc optical diagnostics
Čermák, Jiří ; Valenta, Jiří (referee) ; Dohnal, Petr (advisor)
The aim of this bachelor thesis is to sort out the individual types of electric discharges, explain the ionization inside the plazma of the electric arc and the elucidation of the energetic balance inside the plazma. The electric arc is an undesirable and hardly predictable phenomenon occurring in switching devices during switching on and switching off the electric circuit. Some older methods of image processing obtained by a high-speed camera are also mentioned. Based on the images obtained from the camera, it is possible to make an equidensity or an equidensitogram that is used to monitor the arc in a quenching chamber. The second part includes the description of an experiment performed in a laboratory and the description of the high-speed camera used during this experiment. A modern method of the image processing using software Matlab is also described. An equidensitogram showing different levels of radioation was made in Matlab from the obtained images.
|
|
|
The effectiveness of welding on furnace structures.
Rousová, Michaela ; Mrňa, Libor (referee) ; Kubíček, Jaroslav (advisor)
This diploma thesis is resolving all the possibilities of enhancing the efficiency of furnace structures welding. Small batch production does not offer many possibilities for implementing mechanization or automation. On the other hand, when using a big batch production, efficiency can be enhanced by means of a robotic workstation. When the production batch is big enough, we will see a costs save after a short time, mainly in labor costs. This means the return of investments will be in short time period. In the LAC company there are three types of products made. At laboratory furnaces the efficiency can be enhance by using fixtures. At other standard and atypical furnaces is very difficult to design fixtures or positioners because of their different sizes. Big complication can be also a company location on second floor. The most suitable product regarding to welding efficiency enhancement is big batch production of heaters. For this type the welding time can be shortened by means of a robotic workstation.
|
guest ::
