|
|
Structual welding of aluminium alloy
Blahák, Petr ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The project elaborated in frame of engineering studies branch 2303R002 presents a project that contains welding a structure made of aluminium alloy. There were two usable methods selected, based on literal study of welding aluminium alloys, TIG welding and friction welding, and these were compared with alternative methods of joining, hard soldering and bonding. A work procedure was made for TIG method, soldering and bonding and four experimental joins were made thereafter. Project compares these methods mainly in economical way, also in way of technological difficulties and in way of observance the strength of base materials. Project also deals with problems with lowering strength of base material in heat affected area, burn out of thin material, tendency of aluminium to fill with hydrogen, quick oxidation and consequent hard surface layer emerging on the aluminium.
|
|
|
Networking Subsystem Configuration Interface
Lichtner, Ondrej ; Grégr, Matěj (referee) ; Ryšavý, Ondřej (advisor)
Cílem diplomové práce je návrh síťové konfigurační knihovny s důrazem kladeným na přenositelnost mezi operačními systémy na bázi Linuxu a BSD a rozšiřitelnosti podpory knihovny. V druhé kapitole práce zkoumá dostupné konfigurační rozhraní obou operačních systémů. Detailně pak rozebírá vlastnosti rozhraní Netlink socketů, které je primárním konfiguračním rozhraním pro síťové prvky na Linuxu, a systémové volání ioctl, které má na Linuxu menší schopnosti, ale zato je primárně používané na BSD a jiných UNIX systémech. Jsou též zkoumané rozhraní pro konfiguraci rozdílných firewallů. V třetí kapitole je práce zameřená na konkrétní typy síťových zařízení, specifika jejich konfigurace a jejich návaznost na rozhraní jádra popsané v druhé kapitole. V čtvrté kapitole jsou formulovány požadavky na konfigurační knihovnu: jednoduchá rozšiřitelnost, přenositelnost na různé operační systémy, podpora sledování změn a událostí a rozšiřitelnost o různé typy uživatelských rozhraní. Na základě výzkumu z předcházejících dvou kapitol je přednesen návrh knihovny. Návrh definuje konfigurační rozhraní jako hierarchii abstraktních tříd, oddělených od implementace. To umožnuje mít současně několik implementací stejného konfiguračního rozhraní i v rámci jednoho operačního systému. Jako vstupní rozhraní knihovny je definovaná třída LibNCFG, která má na starosti tyto konfigurační objekty vytvořit namísto uživatele. Tímto je dosažená jednoduchá rozšiřitelnost knihovny o nové rozhraní operačních systémů i o podporu konfigurace nových síťových prvků. Podpora pro nové uživatelské rozhraní se dá implementovat jako nová služba, která zabaluje rozhraní knihovny a poskytuje jiná rozhraní. Pro podporu sledování změn poskytuje třída LibNCFG metody pro registraci zpětných volání pro definované události. Ve čtvrté kapitole práce detailně popisuje rozhraní třídy LibNCFG, modulu Common a tříd NetDevice, EthDevice a BondDevice, které definují konfigurační rozhraní příslušných typů síťových zařízení. Pro tyto třídy jsou implementované konkrétní třídy NetlinkNetDevice, NetlinkEthDevice a sysfsBondDevice a popsané jejich implementační detaily. V páté kapitole je popsaná ukázková aplikace, která byla implementovaná pro účely předvedení jednoduchosti použití konfigurační knihovny. Nakonec jsou v závěru shrnuté výsledky práce a je vedena diskuze o možných vylepšeních a o pokračování projektu.
|
|
|
Production of Multilayer PCB
Janda, Ondřej ; Zatloukal, Miroslav (referee) ; Starý, Jiří (advisor)
This master thesis introduces the problematics of multilayer printed circuit boards. Theoretical part is focused on materials used for production of multilayer PCB and their parameters. At the same time, it focuses on the pressing process of multi-layered PCB, the types of presses used and their advantages and disadvantages. Practical part describes the methodology and testing of the PCB to identify the reliability of chosen electrical parameters. Testing is aimed to simulate thermal stress during machine soldering and during thermal stress in the target environment.
|
|
|
Wireless Communication in Home Automation
Prokop, Michal ; Gutman, Jiří (referee) ; Hynčica, Ondřej (advisor)
This bachelor thesis is about how to make wireless communication network by IQRF technology which is intended for a home automation. It’s created by using DPA custom handler. This network can be made without programming thanks to DPA custom handler. This wireless network is realized by light model that is controlled by coordinator or by a button on a node. After that I measured latency and energy consumption on several various synchronous network and asynchronous network.
|
|
|
Bonding of thin metal sheets
Poul, David ; Kubíček, Jaroslav (referee) ; Dvořák, Milan (advisor)
Bachelor thesis is focused on theory and methods of adhesive bonding. Experimental part is focused on two topics: determining dependences of bonded joint shear tension on a cure time and determining dependences of bonded joint shear tension on a size of contact area. Loctite SI 5399 RD acetoxy silicone one component glue was used for these experiments. At determining dependences of bonded joint shear tension on a size of contact area tension is raising, but the grow wasn’t directly proportional on the grow of size of contact area. Determining dependences of bonded join shear tension on a cure time it was proved, that tension is raising first 24 hours very quickly. After this period is process slowing down and tension is increasing to its maximum. After 18 hours bond tension is solid enough to be handling, but 24 hours of curing time is more secured.
|
|
|
Manufacturing technology of rail vehicle by new adhesive systems
Tesař, Petr ; Kubíček, Jaroslav (referee) ; Daněk, Ladislav (advisor)
This master´s thesis deals with the bonding process, which is the dominant technology of the production of door leaves for railway vehicles. Following the necessary study of the basic essence of bonded joints the thesis further introduces the individual construction options of this product. The essential part of the thesis is represented by presentation of the achieved results of the testing of individual selected types of adhesives. On the basis of these results the most suitable type and supplier of industrial adhesive is selected.
|
|
|
Bonding of composite materials
Drkoš, Jan ; Molliková, Eva (referee) ; Němec, Karel (advisor)
The thesis deals with the analysis of the bonding of composite materials and the subsequent selection of adhesive for the specified glued joint consisting of two pieces of carbon composites. The thesis summarizes the theory of composite materials and then explains in more detail the theory of bonding together with the subsequent testing of glued joint. Another part of the thesis focuses on the market research in the field of available and suitable adhesives and the subsequent selection of the new adhesive for the glued joint, on which the epoxy adhesive was previously used. In this part, glued joints with two pre-selected adhesives were tested and then a conclusion was drawn for the selection of the most suitable adhesive.
|
|
|
Precise bonding of composite materials
Tellinger, Adam ; Gregor, Lukáš (referee) ; Kupčák, Radim (advisor)
This bachelor's thesis deals with the issue of bonding composite materials. The first part of the bachelor's thesis is focused on research into the production of composite materials and gluing technologies. The content of the practical part is the design of test specimens and a preparation for their bonding with subsequent production. Furthermore, verification of compliance with the required accuracy of bonded joints when using different adhesives using 3D measurements.
|
|
|
Rationalization of the production line
Straka, Jiří ; Štipčák, Jaroslav (referee) ; Osička, Karel (advisor)
This masters thesis optimises production of the step plates (which are parts of the sliding steps systems used in tramways, subways, hi-speed trains etc.) to increase the production rate to meet customers demand. The purpose of the work was reached by detailed analysis of the production process followed by evaluation of the results which led to the list of the possible solutions. The solution with the greatest time improvement was chosen and explained in detail.
|
|
|
Bridge crossing over Svitava river and railway track in Blansko
Smělíková, Petra ; Konečný, Vojtěch (referee) ; Křižan, Lukáš (advisor)
The aim of the Diploma Thesis is elaboration of study of bridge crossing over the Svitava river and ČD railway track in Blansko. It concerns a five-pole steel beam road bridge with through-span which carries road of the third category. The static system of the construction is solved as solid-web beam of 1.3 meters height which is in three middle spans reinforced by truss construction with top chord and system of diagonals without verticals. The height of the main beam where reinforced by trusswork is 4.75 meters. The width of spans in the road axis is 18.5 + 30.525 + 44.4 + 30.525 + 18,5 metres. The bridge deck consists of steel cross beams bonded with reinforced concrete slab of 200 millimeters of thickness. The drive-through width of the roadway is 7.0 meters. The bridge is fitted with right-sided walkway placed on steel cantilevers. The walk-through width of the walkway is 3.0 meters. Material used is S355 Steel, C30/37 Concrete and S460 Steel which is used for marginal spans of the bridge. Load-bearing construction is assessed in compliance with current technical requirements laid down by European Directives, so called “Eurocodes”. The calculation of inner powers is performed using the Scia Engineer 2013.1 software.
|
guest ::
