Národní úložiště šedé literatury Nalezeno 153 záznamů.  1 - 10dalšíkonec  přejít na záznam: Hledání trvalo 0.00 vteřin. 
The Precise Measurement of Magnetic Azimuth
Junasová, Veronika ; Levek, Vladimír ; Šteffan, Pavel
This article deals with measuring magnetic azimuthusing inertial sensors. It introduces the steps in this process andobstacles that need to be solved in order to achieve more preciseresults. The magnetic azimuth can be determined using onemagnetometer; however, the precision in such measurement islimited. Therefore, this article also introduces measurement ofrelative azimuth acquired by the gyroscope. The essential part ofprecise measurement is the calibration of the mentioned inertialsensors, which is described in detail. The process of calibration issupported with equations, graphs, and tables. The measurementitself consists of an output from the magnetometer. The relativeazimuth acquired from the gyroscope is then combined using acomplementary digital filter with magnetic azimuth from moreaccurate magnetometer. The final results show the improvementobtained with the presented method. The article also containsinformation on a compact device designed for simple calibrationand measurement with the mentioned sensors.
Door security system
Drugda, Andrej Marián ; Junasová, Veronika (oponent) ; Šteffan, Pavel (vedoucí práce)
This bachelor thesis deals with the design of a door security system supporting entry using a numeric password, RFID card reader and also using fingerprint biometric authentication. The whole project is situated as a demonstration of various methods of security identity verification. The main part is a material model of the door, which is intended to provide visual and clear information about the possibilities of security systems. In addition to safety elements, the work also describes the selection and parameters of the microcontroller on which the entire system is based.The work also contains essentials such as a description of the system's functionality, a display of block diagrams, hardware and software equipment, or step-by-step implementation of the project.
Síťová nabíječka s proměnným výstupním napětím.
Dittrich, Marek ; Šteffan, Pavel (oponent) ; Boušek, Jaroslav (vedoucí práce)
V současné době každá přenosná elektronika, nářadí nebo přístroj jsou napájeny různými typy akumulátorů. Sjednocení druhů není možné, jelikož jejich použití je ovlivněno požadovaným výstupním výkonem, kapacitou, váhou, velikostí či cenou. Liší se mezi sebou také nabíjecím napětím v závislosti na chemickém složení. Proto je často nutné mít pro každý typ vlastní nabíječku. V tomto případě je však snaha zjednodušit nabíjení a snížit náklady na pořizování nabíječek návrhem síťové nabíječky s nastavitelným napěťovým rozsahem od 2,6 V do 20 V. Takové rozmezí dokáže pokrýt nabíjení většiny typů akumulátoru nabízených na trhu.
Měřič krevního tlaku
Kučera, Michal ; Háze, Jiří (oponent) ; Šteffan, Pavel (vedoucí práce)
Tato práce se zabývá problematikou návrhu a realizace neinvazivního měřiče krevního tlaku na principu detekce Korotkových zvuků. Tuto metodu měření krevního tlaku porovnává s dalšími používanými metodami. Tento návrh automatizovaného měřícího systému, který je řízen mikroprocesorem, využívá snímání Korotkových zvuků elektretovým mikrofonem, umístěném v manžetě. Signál z mikrofonu je následně zesílen, vyfiltrován a upraven pro vyhodnocení. Systém využívá procesorem řízené nafukování kompresorem a vyfukování manžety ventilem, který je otevřený bez přivedeného napětí.
Univerzální modul pro podporu týmových her
Zemanová, Renata ; Junasová, Veronika (oponent) ; Šteffan, Pavel (vedoucí práce)
Cílem práce je navrhnout elektronické zařízení, Univerzální modul, které slouží jako pomocník při týmových outdoorových hrách. Při návrhu je kladen důraz na bezpečnost, jednoduchost a nízkou cenu. Kvůli outdoorovému použití je řešena také voděodolnost. Tato práce se zabývá výběrem a návrhem elektroniky. Je kladen důraz na výběr světelné signalizace, bezdrátového modulu, napájení a mikrokontroléru. Návrh DPS probíhal na 2 spojených deskách. Byl vytvořen firmware pro zjednodušené programování Univerzálního modulu a vznikly také demonstrační módy pro různé aktivity.
Solární nabíječka
Šálek, Karel ; Šteffan, Pavel (oponent) ; Levek, Vladimír (vedoucí práce)
Práce se zabývá návrhem solární nabíječky s možností zálohování energie. Nejdříve jsou popsány základní principy fungování fotovoltaických panelů, akumulátorů a DC-DC měničů. Následně je navržena topologie nabíječky a rozbor jednotlivých bloků. V poslední části je provedena realizace a měření základních parametrů zařízení.
Ultrasonic flow measurement
Mikan, Lukáš ; Boušek, Jaroslav (oponent) ; Šteffan, Pavel (vedoucí práce)
This work deals with ultrasonic flow meters which represent a very viable alternative to conventional mechanical solutions. The first part gives an overview of the gas metering industry, different types of gas meters are presented with emphasis on how they compare to the ultrasonic approach. Then, the physics that go into ultrasonic flow measurement are explained. In particular, the Transit Time method is explored which utilizes the time of flight of an ultrasonic signal to calculate the velocity of gas in a pipe. In the second part, a simple functional model is implemented with three ultrasonic paths. This model can measure gas velocity, flow rate, and accumulated volume. It emulates the industry-standard pulse output in order to communicate the volume. The technical solution is based on AS6040 which is a dedicated SoC for ultrasonic flow meters of the Transit Time kind. Presented are the various features of AS6040, the algorithmic measurement system, and key issues faced during development. The functional model is then brought to a sonic nozzle test bench. The third part of this work analyzes the obtained data.
Automobilový LED driver s doplňkovými funkcemi
Vlach, Marek ; Duz, Aleksei (oponent) ; Šteffan, Pavel (vedoucí práce)
V této diplomové práci je proveden návrh a konstrukce LED budiče s přídavnými funkcemi určeného pro automobilový průmysl s ohledem na splnění jeho požadavků. LED budič je založen na principu DC/DC měniče v konfiguraci H-můstku, který slouží k napájení řetězce výkonových LED. Na řetězci LED je pak pomocí řídicí elektroniky budiče realizována sloučená funkce světel pro denní svícení a pozičních světel. Dalšími doplňkovými funkcemi budiče jsou teplotní regulace výstupního proudu a hlášení chyb na řetězci LED. Sadou typických měření na vyrobeném vzorku zahrnující funkční testy, měření účinnosti, teplotní analýzu a EMC testování jsou ověřeny dosažené parametry budiče.
Motor inverter for Formula Student
Macko, Maroš ; Tomíček, Pavel (oponent) ; Šteffan, Pavel (vedoucí práce)
This thesis is focused on a power inverter for traction motors for a Formula Student car. Part of the work involves the design and implementation of this system. The main high-voltage power board design and the selection of suitable components are described. Furthermore, a secondary board is designed, which is used for communication and diagnostic measurements. All systems must comply with the rules of the Formula Student competition.
Wireless communicator for boat sport
Kubovičová, Lucia ; Šteffan, Pavel (oponent) ; Levek, Vladimír (vedoucí práce)
The work deals with technologies related to wireless signal transmission, Bluetooth technology and the design of a device that is used to distribute helmsman's commands on a rowing boat. The device consists of two parts that communicate with each other using Bluetooth technology. Thus, both parts of the device have a Bluetooth module that works in both parts in different modes. The control of the device pairing process is provided by a microcontroller. There are buttons used for external communication and LEDs for signalization.

Národní úložiště šedé literatury : Nalezeno 153 záznamů.   1 - 10dalšíkonec  přejít na záznam:
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.