National Repository of Grey Literature 8,337 records found  beginprevious8328 - 8337  jump to record: Search took 0.56 seconds. 

Sports center with restaurant in Holěšov
Fridrich, Michal ; Melcr, Petr (referee) ; Fišarová, Zuzana (advisor)
The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

fire station
Peňáz, Lubomír ; Mátl,, Miroslav (referee) ; Moudrý, Ivan (advisor)
The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.

A comparison between upgrading of the Březová nad Svitavou railway station and a new railway stop
Jelínková, Markéta ; Hoza, Miroslav (referee) ; Hruzíková, Miroslava (advisor)
The task of the thesis is to propose an adjustment to the railway station Březová nad Svitavou with regard to the introduction of the remote control of security device and explore the possibility of building a new railway stop that would be located closer to downtown. The aim is mutual comparison of elaborated variants. Work includes design of new platforms meet the conditions for safe access for people with limited mobility, next adjustment are adjustment of the geometric parameters of the track superstructure and substructure, including system of drainage station.

Design of highway bridge
Luberová, Lucie ; Formánek, Ing Martin (referee) ; Zich, Miloš (advisor)
The subject of this bachelo r’s thesis is the design a new supporting bridge construction in Prešovský kraj, district Levoča the territory of Slovak Republic. This object is located on the highway D 26,5/120, at kilometer 13,499 795 and communication of third class – 131-00 bridges. The objective is the design of a perpendicular four-span construction, which is proposed in three variants. The first variant is a chamber girder with inclined walls from post-tensioned concrete height 2,480 m. The second variant is composed of two beamed cross-section and the third variant is composed of one beamed cross-section. For detailed assessment the first variant was chosen with a length of bridging of 166,000 m. The calculation of load effects is done by software Scia Engineer and compared with a manual calculation according to current standards. This bridge is designed according to limit states, construction´s influence on design is taking into consideration. Structural analysis, well arranged drawings and visualization are elaborated in this thesis too.

Multifunctional building
Starý, Martin ; Párová,, Jitka (referee) ; Rusinová, Marie (advisor)
This master’s thesis focuses on the preparation of project documentation for construction part of a multifunction building. This buildig has a five floors, the first one is a underground and four of them are above grand. The building is located in part of Prague – Dolní Chabry. Building has a rectangle shape which isin the midle shifted and makes two similar section. Each sectin has own main entry, stairs and lifts. Orientation the longer facades of the multipurpose house are facing to south and north in the longer asis. Garage for resident is located in the lowest floor. In the first floor above ground is commercial part of the house, six commercial spaces. In the rest of the floors are located 26 apartments. Vertical structure are made of the Porother systém and Best systém, celings are meda from prefaricated reinforced concrete panels. Structure of the roof is solid by single skin flat roof.

Center of water skiing Soběslav
Veselý, Tomáš ; Klubalová, Pavlína (referee) ; Brzoň, Roman (advisor)
The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.

Ohodnocení Risků Mezinárodních Obchodních Kontraktů na Trhu Alkoholických nápojů
Osadchenko, Igor ; Halík, Jaroslav (advisor) ; Štěrbová, Ludmila (referee)
The aim of my thesis was to analyze and identify main types of risks and uncertainties, which can be faced by international companies. I also described main ways and methods of avoidance and minimisation of such risky situations. AB Inbev was chosen as an example since I was working in the branch of this company located in Prague, Czech Republic. This explains my concentration mainly on the market for beverages.

The thermal regime of ice pits of the Borec hill
Türkott, L. ; Martinčíková, Eva ; Potop, V.
The ecological stability of the sites with stenoec organisms is important factor for maintaining them at given location. Phonolite system of the Borec hill creates a unique labyrinth of vents. Thermal anomalies occur during the year in the fissure system and create specific microclimate. Flow direction is given by the temperature gradient inside and outside of the system. The lower part of fissure system is located in the debris fields, while the upper part on top of the hill. Phonolite rocks are cooled down by air streaming from the debris fields during the winter. Direction of the air flow changes in the spring and summer. The cold air is exhaled from these vents on the lower parts of system and creates ice pits with the typical vegetation.

Computational Simulation of Mechanical Tests of Isolated Animal Cells
Bansod, Yogesh Deepak ; Kučera,, Ondřej (referee) ; Florian, Zdeněk (referee) ; Canadas, Patrick (referee) ; Burša, Jiří (advisor)
Buňka tvoří složitý biologický systém vystavený mnoha mimobuněčným mechanickým podnětům. Hlubší pochopení jejího mechanického chování je důležité pro charakterizaci její odezvy v podmínkách zdraví i nemoci. Výpočtové modelování může rozšířit pochopení mechaniky buňky, která může přispívat k vytvoření vztahů mezi strukturou a funkcí různých typů buněk v různých stavech. Za tímto účelem byly pomocí metody konečných prvků (MKP) vytvořeny dva bendotensegritní modely buňky v různých stavech: model vznášející se buňky pro analýzu její globální mechanické odezvy, jako je protažení nebo stlačení, a model buňky přilnuté k podložce, který vysvětluje odezvu buňky na lokální mechanické zatížení, jako třeba vtlačování hrotu při mikroskopii atomárních sil (AFM). Oba zachovávají základní principy tensegritních struktur jako je jejich předpětí a vzájemné ovlivnění mezi komponentami, ale prvky se mohou nezávisle pohybovat. Zahrnutí nedávno navržené bendotensegritní koncepce umožňuje těmto modelům brát v úvahu jak tahové, tak i ohybové namáhání mikrotubulů (MTs) a také zahrnout vlnitost intermediálních filament (IFs). Modely předpokládají, že jednotlivé složky cytoskeletu mohou měnit svůj tvar a uspořádání, aniž by při jejich odstranění došlo ke kolapsu celé buněčné struktury, a tak umožňují hodnotit mechanický příspěvek jednotlivých složek cytoskeletu k mechanice buňky. Model vznášející se buňky napodobuje realisticky odezvu síla-deformace během protahování a stlačování buňky a obě odezvy ilustrují nelineární nárůst tuhosti s růstem mechanického zatížení. Výsledky simulací ukazují, že aktinová filamenta i mikrotubuly hrají klíčovou úlohu při určování tahové odezvy buňky, zatímco k její tlakové odezvě přispívají podstatně jen aktinová filamenta. Model buňky přilnuté k podložce dává odezvu síla-hloubka vtlačení ve dvou různých místech odpovídající nelineární odezvě zjištěné experimentálně při AFM. Výsledky simulací ukazují, že pro chování buňky je rozhodující místo vtlačení a její tuhost určují aktinová povrchová vrstva, mikrotubuly a cytoplazma. Navržené modely umožňují cenný vhled do vzájemných souvislostí mechanických vlastností buněk, do mechanické úlohy komponent cytoskeletu jak individuálně, tak i ve vzájemné synergii a do deformace jádra buňky za různých podmínek mechanického zatížení. Tudíž tato práce přispívá k lepšímu pochopení mechaniky cytoskeletu zodpovědné za chování buňky, což naopak může napomáhat ve zkoumání různých patologických podmínek jako je rakovina a cévní choroby.

More effective approaches of brown coal post-mining restoration
Christov, Ivan ; Hendrychová, Markéta (advisor) ; Walmsley, Alena (referee)
The thesis is focused on evaluation of landscape restoration procedures. The land was heavily devastated by large-scale quarrying. Here are compared reclamation procedures used in the Czech Republic and abroad. Study area is the North Bohemian brown coal basin, which formed areas valuable for many endangered species of flora and fauna after the mining has ended. Surface coal mining method causes the extinction of villages, roads, railways, land and greenery. Our task now is to minimalize these effects as much as possible. To create a new landscape, with an emphasis on the environment. Reclamation helps us to do that. Monitored location is Střimická dump, where the representation of non-productive habitat was evaluated and there was proposed new, more efficient version of reclamation. Mapping has found that the current state of the dump is 5,2 % representation of non-productive habitat. The proposed variant represents the addition of new elements and thus increase the proportion to 23,5 %, which corresponds with the current trend of post-mining landscape recovery.