|
|
Bridge crossing over Svitava river and railway track in Blansko
Smělíková, Petra ; Konečný, Vojtěch (referee) ; Křižan, Lukáš (advisor)
The aim of the Diploma Thesis is elaboration of study of bridge crossing over the Svitava river and ČD railway track in Blansko. It concerns a five-pole steel beam road bridge with through-span which carries road of the third category. The static system of the construction is solved as solid-web beam of 1.3 meters height which is in three middle spans reinforced by truss construction with top chord and system of diagonals without verticals. The height of the main beam where reinforced by trusswork is 4.75 meters. The width of spans in the road axis is 18.5 + 30.525 + 44.4 + 30.525 + 18,5 metres. The bridge deck consists of steel cross beams bonded with reinforced concrete slab of 200 millimeters of thickness. The drive-through width of the roadway is 7.0 meters. The bridge is fitted with right-sided walkway placed on steel cantilevers. The walk-through width of the walkway is 3.0 meters. Material used is S355 Steel, C30/37 Concrete and S460 Steel which is used for marginal spans of the bridge. Load-bearing construction is assessed in compliance with current technical requirements laid down by European Directives, so called “Eurocodes”. The calculation of inner powers is performed using the Scia Engineer 2013.1 software.
|
|
|
Residential House ERASMUS, Brno
Kolibač, Radek ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The objective of this thesis was to design and check typical elements of the 5th storey of monolithic reinforced concrete structure of residential building. Horizontal load-bearing structure consists of a continuous slab of six fields with reinforcing ribs, which are located under the building envelope, bidirectional slab simply supported, further staircase beam and lintels in the corridors and loggias. Vertical structures consist of walls and columns.
|
|
|
Design of prestressed bridge structure
Otáhal, Ondřej ; Rybák, Vít (referee) ; Klusáček, Ladislav (advisor)
Diploma thesis deals with design of a road bridge over Husí potok in Hladké Životice. The supporting structure of the bridge is designed in three variants, one of which is selected variant post-tensioned slabs. To address the internal forces is used computing software Scia Engineer. In the structural analysis of the bridge structure is assessed at the ultimate limit state and serviceability by European standards – Eurocodes. For chosen variant is prepared drawing documentation and visualization.
|
|
|
Static solution of swimming pool in new mountain hotel building
Krtička, Jakub ; Laníková, Ivana (referee) ; Zlámal, Martin (advisor)
The static solution at the new building mountain hotel The thesis deals with design and static calculation of pool tank, which is supported by columns and walls. Pool tank is designed as swimming pool with plan dimension 25 x 10 meters and with changing depth from 1,2 to 1,8 meters. The support of pool tank is in distance 5,02 x 5,05 meters. The adjacent ceiling is placed on the walls of tank and separates pool and technical areas. The calculations of inner forces were realized by computational programm for two models a) without decline of supports, and model b) with decline of supports. The design of reinforcement is performed for the bottom and walls of tank. The deformations modeling was made at the other part of the thesis. All results were evaluated and summarized at the conclusion. Drawing documentation was made subsequently.
|
|
|
Sewage disposal plant
Doležal, Martin ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
This thesis deals with the design and static assessment of a concrete part of a sewage treatment plant. Specifically, the calculation and assessment of the base plate, external walls, internal walls and ceiling slabs, elaboration of shape and reinforcement drawings of selected structural element. The concrete part of the Sewage disposal plant is all below ground level. Static system and the calculation of internal forces was carried out in Scia Engineer 2011 - student version.
|
|
|
Sludge Digester Tank
Hurčík, Vít ; Šiška, Radek (referee) ; Strnad, Jiří (advisor)
Master’s thesis deals with the design and assessment of the bearing structure of sewage treatment plant and development of the drawnings. The thesis solves the main part of the structure: base slabs, walls and ceiling slabs. Thesis solves the ultimate limit state and ultimate limit serviceability.
|
|
|
Office Building
Pospíšil, David ; Mazánek, Pavel (referee) ; Košíčková, Ivana (advisor)
My thesis solveses the office building. The building will be located in Šumperk. It will be located near the center. The building has two floors and a partial basement floor. Ceilings are beams with ceramic inserts and reinforced concrete slabs. Vertical structure consists of a ceramic blocks in the aboveground parts and concrete blocks in the underground section. The roof is walked on vegetation. The staircase is reinforced concrete, monolithic. The entire building is insulated with mineral wool. Basement is insulated with polystyrene foam.
|
|
|
Industrial Building - Review of Selected Reinforced Concrete Parts
Weber, Jozef ; Zlámal, Martin (referee) ; Švaříčková, Ivana (advisor)
Bachelor’s thesis deals with reinforced concrete floor structure. It is a 3D frame, which is composed of bar elements oriented in the longitudinal and transverse direction. The work is done calculating mean longitudinal beam and also the middle of the cross beam. Furthermore, the calculated floor structure, which operates in both directions. For the calculation of inner strength used computer program SCIA ENGINEER 2013.0, which operates on the Finite Element Method - FEM. All elements have been designed for ultimate and serviceability limit state. Work contains textual part, inner strength, static calculations, drawings and used documents.
|
|
|
Reinforced concrete structure
Vaněčková, Adéla ; Čairović, Dorde (referee) ; Šulák, Pavel (advisor)
The aim of bachelors thesis is to design of the frame monolithic reiforced concrete frame construcition of a multistoried garage. Project designe sof a typice storey of construction. The supporting structure consist of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reaction of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992 – 1 – 1. Structural analisis was modeled using Scia Engineer 20014 – Student vision. The results were validated by simplified manual method.
|
|
|
Service Hall Velké Meziříčí, Administrative Part
Dulák, Michal ; Jeneš, Rostislav (referee) ; Podroužková, Božena (advisor)
The aim of this bachelor thesis was the design of reinforced concrete cast-in-place horizontal structures about the first floor of three-storied building. Horizontal constructions are made of two-field continuous slab. In static calculation the following are designed and evaluated : ceiling slab, beam, angled slab, staircase, landing, column. Construction has been designed to fulfill functionality and economic point of view. Drawing documentation is a part of the thesis.
|
guest ::
