|
|
Highway bridge over wide wally
Mertová, Eliška ; Smejkal, Ing David (referee) ; Klusáček, Ladislav (advisor)
The aim of this diploma thesis was the design of three possible variants, how to span the wide and deep valley with a bridge. After an evaluation, situation of the highway on the only wide load-bearing structure which is constituted by a box girder with transverse cantilevers supported by prefabricated bar braces, was chosen as an optimal solving. The load- bearing structure made of post- tensioned concrete is going to be incrementally launched and be supported by one-column pillars along an axis of the motorway. The work is composed of a detailed design of this preferred variant, which is processed according to the ultimate and serviceability limit state including the construction stage analysis of the bridge by the construction technology by an incremental launching method.
|
|
|
Bridge formed by cell box girder
Zifčák, Karel ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of the bridge construction across the deep valley on highway traffic. From three variants, which were compared to each other, was the most suitable further examined. The solved structure is made of post-tensioned concrete, and is formed with cell box girder with transverse overhangs, which are supported by prefabricated struts over the length of the bridge. The load was considered by the European Standard EN 1991-2 - Traffic loads on bridges and dimensioning according to EN 1992-2-Design of concrete structures - Concrete bridges - Design and detailing rules.
|
|
|
Bridge across railway line
Kubelka, Jan ; Neudert, Zdeněk (referee) ; Panáček, Josef (advisor)
The final thesis is focused on design of road bridge over a railway track. The design is processed in tree options - a cast-in-place concrete structure, brigde as a haunched beam and a prefabricated ginger bridge. The third option was chosen. To model the structure and to obtain the internal forces is used FEM computational software Scia Engineer 15.1. All calculations were performed in accordance with Eurokode.
|
|
| |
|
|
Nonlinear Analysis of Composite Cross-Section With Respect To Effects of Shrinkage, Creep, Ageing and Temperature
Hron, Lukáš ; Kulhavý,, Tomáš (referee) ; Čajka,, Radim (referee) ; Vráblík,, Lukáš (referee) ; Navrátil, Jaroslav (advisor)
Advanced computational methods for the analysis of building structures are used more often in engineering practice. Their use is enforced not only by the demands for aesthetics, functionality and high economy of the construction, but often directly by code provisions and requirements. Therefore, it is necessary to provide for an engineer the robust, but transparent tool, which can be used for an efficient design of structure all over it's design working life. This work deals with the creation of a computational system for time dependent analysis of concrete and composite structures. It is assumed a solid or composite concrete section with possible application of pre-tensioned and/or post-tensioned tendons. Each phase of step-by-step build composite cross-section has a general geometry. The used algorithms give us the possibility of a detailed analysis of the structure in individual construction stages, provide the designer better view on the behavior of structures with respect to concrete aging, shrinkage and creep, relaxation of prestressed tendons and provide an information on the redistribution of internal forces in the structure and in different phases of the cross-section. Stress state of the structure calculated in this way come in useful further in the design and checking of ultimate and serviceability limit states. Results of time dependent analysis are verified by manual calculations and by comparing with the results obtained by simplified methods.
|
|
| |
|
|
Motorway Viaduct
Polách, Marek ; Šopík,, Leonard (referee) ; Stráský, Jiří (advisor)
The thesis is a design of a bridge crossing the valley of the Hrabyňka creek as a part of road I/II. Firstly, three possible structures are designed and according to their advantages and disadvantages, the best of them is selected. In this case a cable stay bridge was selected. Following is a design of span lenghths, collumn heights and the cross-section. Then the loads are detremined and applied on a numeric model cretaed in software working on the basis of FEM. In continuation internal forces are calculated and their propriate combinations for service limit stay and ultimate limit state with time dependent analysis taken into account. In the end the reinforcement steel is designed for one part of the structure. Detailed drawings are also part of the thesis.
|
|
|
Bridge across Bystrica creek
Nani, Pavel ; Glovina, Filip (referee) ; Zich, Miloš (advisor)
The subject of my diploma thesis is a detailed static calculation of the post-tensioned concrete road bridge across Bystrica creek near Banska Bystrica in Slovakia. The bridge is element of turning ramp a motorway R1. The spatial curvature continuous bridge has 9 fields. It was made a spatial curvature computational model of the bridge for a structural analysis. The model was comparison with a straight computational model of the bridge. It is made comparison effect of the construction bridge in stages on the size of the internal forces too. The load-bearing structure was checked according to CSN EN 1992-1-1, CSN EN 1992-2 and CSN 73 6214.
|
|
|
Static analysis of residential building
Hanzlík, Petr ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The discussion of the master’s thesis is static analysis of residental building. The thesis details the original solution from assesment and a new design variant solution. The work is focused on static solution of monolithic concrete plate with ribs and is devoted to limit states assessment of the plate with ribs. The thesis includes a time analysis structure and prestressed ribs in the new variant.
|
|
| |
guest ::
