|
|
Design of a simulator module for analysis of friction and wear of teeth during cleaning
Snopek, Lukáš ; Streďanská, Alexandra (referee) ; Vrbka, Martin (advisor)
This thesis focuses on the design of a module for the tribological simulator Bruker UMT TriboLab, which will be used in research in the field of analysis of wear of hard dental tissues and filling materials due to tooth cleaning. The aim of this work was the design of experimental conditions, module construction, creation of drawing documentation, production and subsequent implementation of a validation experiment. The conditions of the experiment were determined on the basis of research and to create an optimal design solution, prototypes were continuously produced using the 3D printing method. Finally, two toothbrush fixtures and two dental filling sample fixtures were made based on the drawing documentation. Subsequent assembly of the fixtures and the implementation of the experiment on the tribometer verified their functionality, which makes it possible to declare all the goals successfully met. Now these fixtures will be part of several research tasks in the field of oral biotribology.
|
|
|
Biotribology of artificial tears for the treatment of dry eye syndrome
Černohlávek, Mikuláš ; Daniel, Matej (referee) ; Vrbka, Martin (advisor)
This master thesis is a part of the project TAČR TREND, which aim is the development of new ingredient for treatment of dry eye syndrome. Developed ingredient is derivative of hyaluronic acid, which is in this thesis compared with native hyaluronic acids and commercial eye drops. Aim of this thesis is to describe rheological and tribological properties of measured samples in terms of viscosity, mucoadhesivity and coefficient of friction. Coefficient of friction was measured on created tribological model of the eye in pin-on-plate configuration which represents physiologically relevant sliding speeds of blinking. Comparison with native hyaluronic acids and commercial products of eye drops showed, that derivative reaches higher values of viscosity, has mucoahesive properties and has low values of coefficient of friction. Those key parameters show that modification of hyaluronic acid is promising way for drug development for dry eye disease.
|
|
|
Friction of compliant contacts
Vala, Martin ; Galas, Radovan (referee) ; Nečas, David (advisor)
This bachelor’s thesis deals with the study of the friction of compliant contacts and parameters affecting it. First section of this thesis provides analysis of current problematics with friction and compliant materials. In the next section basic definition of friction, compliant material and compliant contacts is provided with an actual study of up-to-date articles. Last section of this thesis is discussion dealing with all the articles and pointing out the influencing parameters. Followed by potential research pathways.
|
|
|
Development of the coefficient of friction and lubrication film in a total knee replacement during a gait cycle
Odehnal, Lukáš ; Horák, Zdeněk (referee) ; Ranuša, Matúš (advisor)
This master´s thesis deals with the experimental analysis of the coefficient of friction and lubrication film in total knee replacement. The experiments are performed on a knee joint simulator, with an implemented module for measuring friction. To observe film formation, fluorescent microscopy is used. The experiments are mainly focused on a detailed description of the influence of parameters occurring during the gait cycle. This approach should significantly help in describing the tribological processes that occur in the total knee replacement. The results confirm previous investigations in terms of axial load, where the coefficient of friction decreases with the increasing load. In the case of lubrication film, no significant changes are observed. On the contrary, while investigating the influence of SRR, noticeable changes in film formation are observed while the coefficient of friction being unaffected. While describing the whole gait cycle, precise results are obtained only in the first half of the cycle as the second half is accompanied by the occurrence of large deviations from a rapid decrease of load. This work provides a better understanding of the field of lubrication film in total knee replacements. Moreover, thanks to the simultaneous measurement of the coefficient of friction and the observation of the contact area, it is possible to draw better conclusions than if the experiments had been carried out separately.
|
|
|
Friction of materials for optomechanical parts
Mořický, Ondřej ; Košťál, David (referee) ; Šperka, Petr (advisor)
This bachelor thesis deals with friction between materials used in the construction of optomechanical assemblies. The aim of the thesis is to compare coefficient of friction for different combinations of surfaces, different roughness, and different surface treatments. Experimental measurement was carried out on a tribometer using the pin-on-plate method under the dry friction conditions. Graphs of the development of coefficient of friction over time and a table to compare individual combinations were compiled from the results of the measurement. It includes an analysis of surfaces using optical profilometry before and after the tests.
|
|
|
Friction in forming proceses
Pažítková, Monika ; Dvořák, Milan (referee) ; Lidmila, Zdeněk (advisor)
This thesis deals with tests of forming operations, which are used to determine coefficient of friction. In the theoretical part of thesis, the individual tests are described in details, with the greatest emphasis on the upsetting test. In the experimental part of thesis was perform upsetting test on the cylindrical and ring samples. Coefficient of friction of the cylindrical samples was determined by a calculation method and ring samples were evaluated using diagram of calibration. The thesis includes comparison of the result received on lubricant and unlubricated samples and method for determined coefficient of friction. Graphite Delta 144 was used as a lubricant. This result show that the lubricant has a positive effect on forming process.
|
|
|
The effect of surface condition of artificial joint cup on the friction coefficient
Černohlávek, Mikuláš ; Dočkal, Kryštof (referee) ; Nečas, David (advisor)
This bachelor’s thesis deals with the effect of microtextured surface of an artificial joint cup on a friction coefficient. The primary aim of this thesis was to compare friction coefficients of original and microtextured joint cups. Experimental measurements were made on pendulum hip joint simulator and results were evaluated in Matlab. Four types of femoral heads (CoCrMo, BIOLOX Delta, BIOLOX Forte and oxinium) and three types of lubricants (PBS, model synovial fluid and hyaluronic acid solution) were used during the measurements. The results show, that using PBS and synovial fluid leads to decrease of the coefficient of friction while using modified joint cup. We can assume that microtextured surface of artificial joint cup (separately or in combination with microtextured femoral head) could be a significant benefit for prolonging lifespan of implants.
|
|
|
Analysis of contaminants in wheel and rail contact
Straka, Tomáš ; Galas, Radovan (referee) ; Kvarda, Daniel (advisor)
Wheel/rail contact is significantly influenced by so called third body – contaminants. Aim of this bachelor’s thesis is to analyse those contaminants in the contact and to create a brief overview. Short introduction into problem of wheel/rail contact is included, followed by description of main contaminants occurring in the contact. This thesis may be used as introduction into contamination of wheel/rail contact problem.
|
|
|
The effect of synovial fluid composition on friction of joint cartilage
Furmann, Denis ; Daniel, Matej (referee) ; Nečas, David (advisor)
This thesis deals with the study of the effect of the constituents of the model synovial fluid on the frictional properties of articular cartilage. The influence of constituents, concentration, speed and load is observed. Experiments were performed on a commercial tribometer at configuration pin-on-plate. Several types of lubricants containing synovial fluid constituents have been selected for the experiments. Lubricants were prepared at two concentrations, the concentration of healthy individuals and at a concentration typical of for osteoarthritic patients. Speeds 5 and 10 mm/s and 5 and 10 N loads were used for all experiments. It is shown that when using only lubricant containing proteins, no difference in the coefficient of friction is observed and the effect of concentration is also not observed. The addition of hyaluronic acid has a synergistic effect with -globulin, however in the case of lubricants containing albumin, the effect is opposite. After the addition of phospholipids, no significant effect on friction is observed in -globulin containing lubricants. No significant effect of the composition and concentration of the lubricants is observed with the load change.
|
|
|
Biotribology of articular cartilage
Furmann, Denis ; Látal, Roman (referee) ; Nečas, David (advisor)
This bachelor thesis deals with biotribology of articular cartilage. The first part deals with the analysis of individual building components of cartilage. Another part is devoted to the definition of the tribological properties of cartilage with regard to friction, wear and lubrication. The thesis also briefly analyses selected publications dealing with articular cartilage biotribology. Two hypotheses have been formulated and verified on the basis of the processed articles. Will the friction coefficient fall at a higher load? Will the friction coefficient increase at higher speed? It has been experimentally confirmed that the friction coefficient value increases with increasing speed and decreasing load.
|
guest ::
