| |
|
Effect of glass fibers in the lead-acid batteries for hybrid electric vehicles
Klojda, Viktor ; Tošer, Pavel (referee) ; Bača, Petr (advisor)
Master´s thesis deals with the utilization of lead-acid accumulators in hybrid electric vehicle regime. It describes the side effects known as PCL, generated during PSOC regime and connected with the length of the battery lifespan. One possibility how to eliminate these effects, is the use of additives in active mass of the negative electrode, in the form of glass fibres. The project provides the parametres and reactions of additive, that have lead to the improvement of battery properties. The purpose of this thesis is to verify the positive effect of the aditive on the lifespan of the lead-acid accumulator.
|
| |
|
Using lead-acid accumulators in hybrid electric vehicle regime
Hejdiš, Roman ; Novák, Vítězslav (referee) ; Bača, Petr (advisor)
The master´s thesis discuss characteristics of hybrid electric vehicles and lead-acid accumulators applied in car industry. It compares classic and alternative drive in cars, descibes classification of hybrid drives and its characteristics. Further work disscus lead-acid accumulators which focuses on VRLA accumulators applied in hybrid electric cars. Practical part contains a construction description of negative electrode and experiment, which studied influence of various amount addition of carbon on attributes of these electrodes.
|
|
Functional blocks for the development of autonomous photovoltaic system
Ovesný, Karel ; Křivík, Petr (referee) ; Bača, Petr (advisor)
The project considers realization system, which will allow us to test six different operation modes on lifetime accumulators. The system will link to computer, which will execute measurement current and tension and switch betwencharging and discharging modes. The measured values will record in someone time intervals in to computer memory. After someone time will analise these measured valuer and will provide optional operation mode.
|
|
Investigation pressure effect on lead-acid accumulator lifetime for hybrid electric vehicles.
Kulhány, Andrej ; Bilko, Radek (referee) ; Bača, Petr (advisor)
The thesis is focused on remitting lead-acid segments of partial charge mode which simulates the conditions in HEV. The experimental cells were submitted to different pressures on the electrode system. The main aim of the thesis was to minimize the irreversible sulphating of the negative electrodes, which are in the PSoC regime limiting in the overall life of lead-acid accumulators. All cells were submitted to measurement of the negative electrode potentials, resistance of active materials, contact resistance of the grid – the active material and measurements of pressure changes during three PSoC cycles.
|
|
Investigation of temperature change in lead-acid accumulator for HEV
Tošer, Pavel ; Křivík, Petr (referee) ; Bača, Petr (advisor)
The oldest and also most used type of secondary cells is lead-acid accumulator. Basic functional principle stayed same as in foundation time, only operation parameters are still improving (for example one of the most important is lifetime). Significant technical problem is temperature of lead-acid battery and her influence on functionality and running reactions. Master thesis is focused on this section, when is necessary to evaluate new pieces of knowledge in development. The work deals with description existing types of accumulators, further deals with theory of temperature balance and in the end by measured datas and theirs analyzing.
|
| |
|
Development control programme for autonomous fotovoltaic system
Janáč, Stanislav ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
The project considers realization system, which allows us to test six different operation modes on lifetime of accumulators. The system will be connected to computer, that will perform measurement of current and voltage and switch betwen charge and discharge modes. The measured values will be recorded in certain time intervals to computer memory. After some time these measured data will be analised and the most optimal operational mode will be set.
|
|
Examine selected properties of accumulators
ŠOPEJSTAL, Michal
The aim of this Bachelor thesis is examine selected properties of accumulators. In the literary part are mainly described their characteristics of charging and discharging, parameters of working life and construction. The next part is about methodology for practical verification selected properties of the accumulators. Another part consists of comparing and measurement four selected accumulators. Obtained data from measurements are then evaluated.
|