|
|
DC/DC converter 24 V / 320 V / 60 W for a back-up supply source with a galvanic separation
Dvořák, Petr ; Martiš, Jan (referee) ; Vorel, Pavel (advisor)
This bachelor‘s thesis deals with the design, dimensioning and realization of a DC/DC 24 V / 320 V converter with a output power of 60 W. In the first part there is a short description of the linear stabilizer and then the switching sources with their dismemberment. Based on that chapter, was selected the flyback converter. The second part deals with components design and description of the control circuit. At the end, the construction of the converter with the verification measurement records is shown.
|
|
|
Charger for lead-acid batteries
Kopuletý, Ondřej ; Procházka, Petr (referee) ; Ondrejček, Vladimír (advisor)
This bachelor‘s thesis deals with the modification, construction and testing of lead-acid battery chargers. It is described the principle of charging the batteries and individual topology of the switching power supplies. The original schematic diagram is taken from the thesis of Josef Kadlec. Diagrams of a power and control circuit have been modified. The topology of the charger is two switch forward converter with pulse transformer. The charging method is constant voltage with current limiting.
|
|
| |
|
| |
|
|
Switch mode supplies
Kadlecová, Lucie ; Červinka, Dalibor (referee) ; Patočka, Miroslav (advisor)
In this bachelor‘s thesis is described the design and construction of switch-mode power supply with a pulse transformer. It is mainly focused on projecting and putting into practice of the basic functional elements - LC filter, pulse transformer, transistor converter, transistor drivers, rectifiers and control circutory, including experimental testing of the final product.
|
|
|
Switched power source 300 V/100 V
Horníček, Evžen ; Lutera, Ondřej (referee) ; Pavelka, Ondřej (advisor)
This thesis deals with design of switching power supply used for supplying of electronical measurement instruments. The project consists of choosing of suitable type of the converter, system design of the converter, design of the pulse transformer and the output coil. For final control of design was designed the convertor with universal control circuit and there were measured its basic parameters. Then, the universal control circuit was replaced by microcontroller.
|
|
|
Switched power source 300 V/100 V
Horníček, Evžen ; Lutera, Ondřej (referee) ; Pavelka, Ondřej (advisor)
This thesis deals with design of switching power supply used for supplying of electronical measurement instruments. The project consists of choosing of suitable type of the converter, system design of the converter, design of the pulse transformer and the output coil. For final control of design was designed the convertor with universal control circuit and there were measured its basic parameters. Then, the universal control circuit was replaced by microcontroller.
|
|
|
DC/DC converter 12 V to 300 V
Buba, Ondřej ; Kubíček, Michal (referee) ; Kolouch, Jaromír (advisor)
The thesis deals with design of switching power supply to power the oscilloscope. In this project the topology of the DC-DC converter is chosen, the pulse transformer and the output coil is designed. The control circuit is also choosen a suggested. This circuit will be replaced with microcontroler ATMEL in the second part of this thesis. The microcontroler will be programmed to replace the control circuit.
|
|
|
Switch mode supplies
Hladík, Jan ; Martiš, Jan (referee) ; Patočka, Miroslav (advisor)
This thesis deals with the design of switched power supply for laboratory lessons. Forward converter was chosen as the topology of this power supply. Output voltage is adjustable from 0 V to 32 V. Power supply is capable of output current up to 10 A and output has adjustable current limiting. Following parts were designed: LC filter, pulse transformer, bridge rectifier with capacitor, power MOS-FETs driver, closed loop control with its auxiliary power supply. Cascade closed loop control is used for controlling of designed power supply. Control is analogue, operation amplifiers were used for its construction. PCB was designed for the whole power supply. Power supply was sucessfully assembled and tested.
|
|
|
Converter for DC Welding
Siuda, Petr ; Vorel, Pavel (referee) ; Patočka, Miroslav (advisor)
This master´s thesis with the peripheral and structural design of power converter that will be used for DC welding. The drive itself is based on the principle of two single-acting permeable converters operating in counter strokes to a mutual load. The inverter operates at a frequency of 60kHz, and its output current can be controlled from 0 - 100A. Welder is equipped with a variable constant current or power adjustment. The device is powered from a single-phase 230V.
|
guest ::
