|
|
Testing of cutting tools for multi-axis machining at machining centres
Dvořáček, Jan ; Píška, Miroslav (advisor)
The thesis is focused on testing of the cutting tools for machining on five axis machine tools and possibility of implementation of designed experiments in this area. The theoretical section focuses attention on analysis of specific features during five axis machining, including chip cross section and particularity of tool testing under high speed cutting conditions with consideration of dynamic stability of cutting tools. In the thesis force loading of the tool is discussed as well as its measurement process, considering force development caused by tool wear and data analysis. Description of designed experiment and its application to the area of tool testing is included as well. All theoretical predictions are followed by experimental verifying by extensive number of experimental tests, including evaluation of cutting tool condition, influence of hard coatings on cutting power of the tools, etc. For each of testing conditions are designed specific methods of processing of gathered data as well as evaluation of power of the cutting tools. Gathered data were processed by means of statistical evaluation and by statistical methods of designed experiments. The thesis contains also the extensive number of records and analysis, documented by means of light microscopy as well as electron microscopy.
|
|
|
Design of Experiment
Holec, Tomáš ; Popela, Pavel (referee) ; Bednář, Josef (advisor)
In this thesis, the design of experiment is studied. Firstly, a theoretic background in mathematical statistics necessary for understanding is built (chapter 2). The design of experiment is then presented in chapters 3 and 4. Chapter 3 is divided into several subchapters in which its brief history is provided as well as its complex theoretic description (basic principles, steps for planning, etc.). Chapter 4 deals with particular types of the design of experiment (Factorial experiments or Response surface design). Simple examples are provided to illustrate the theory in chapters 3 and 4. Last part of the thesis is strictly practical and focuses on an application of the theory for particular data sets and its evaluation (chapter 5).
|
|
|
The development of high performance concrete with secondary raw materials
Osuská, Lucia ; Ťažký, Tomáš (referee) ; Hela, Rudolf (advisor)
The thesis is focused on the possibility of using secondary energy resources as an additive to concrete to improve some of its resulting properties. The theoretical part is devoted to the problems of shrinkage and prominence hydration process during hydration of the concrete. This section also contains the results of research work from domestic and foreign sources of high temperature fly ash and fluidized bed combustion fly ash use and their using in concrete. The practical part verifies the possibility of using these materials and their combination as an additive to concrete with impact on the physical and mechanical properties.
|
|
|
MODERN TECHNOLOGIES IN WIRE ELECTRICAL DISCHARGE MACHINING THE METAL ALLOYS
Mouralová, Kateřina ; Karpíšek, Zdeněk (referee) ; Pokorný, Peter (referee) ; Píška, Miroslav (advisor)
The dissertation is focused on streamlining production on wire electric discharge machine during cutting metal alloys, specifically low-alloy steel quality by CSN 41 4220. The first part contains a study of the current and modern technologies EDM wire cutting. The second part is focused on identifying key parameters to influence the WEDM process, a detailed analysis of the machined surfaces of samples and wire electrodes used for cutting. The result of this work was to explore the possibility, whether by performing planned experiment and subsequent evaluation in the future to determine exactly setting the key parameters influencing the process of WEDM.
|
|
|
Vacuum evaporation efficiency improvement
Havlásek, Martin ; Máša, Vítězslav (referee) ; Vondra, Marek (advisor)
This thesis is focused on experimental work in the domain of vacuum evaporation efficiency improvement. The first part introduces theory of liquids evaporation and its influencing factors, then multi-stage flash distillation technology. The next part of theory is an overview of other technologies used for desalination of sea water and introduction to the design of experiments. In the practical part are selected factors affecting efficiency of device and experiment plan is designed for them. When the experiment is done, optimal operating conditions of technology are designed on basis of analysis.
|
|
|
Production process optimization
Drábková, Veronika ; Jankových, Róbert (referee) ; Fiala, Alois (advisor)
This master´s thesis is aimed at the strategy and implementation of DOE (planned experiment) and QFD (quality function deployment) in business. There are described about these methods. It deals with their use for a given problem. The last section provides a possible procedure in the enterprise.
|
|
|
Design of Experiment
Lachnit, Zdeněk ; Bednář, Josef (referee) ; Kotek, Luboš (advisor)
The main subject of this master thesis is to evaluate using of Design of Experiment in industrial company in the development of LED modules for cars. In background study Design of Experiment methodology is described. Next part of background study describes the general principles of termography measurements, next chapter includes the information’s about LED technology and temperature degradation. At the beginning of the practical part is a description of the team analysis due to selection of factors, next chapter validates importance of vias. In next chapter methodology of print circuit board preparations and measuring are described. A next chapter describes the implementation of design of experiment at voltages 8 V, 13,5 V, 16,5 V. Designs of Experiments were made for four or five factors. The reason for this decision was the manual adjustment of printed circuit boards. At the end of each Design of Experiment is the recommendation of factors and interactions settings with regard on response, which is the minimal temperature. At the end of master’s thesis is the final evaluation.
|
|
|
Statistical analysis of production
Kovaříková, Ludmila ; Grepl, Mojmír (referee) ; Maroš, Bohumil (advisor)
The aim of Master's thesis is to apply statistical methods in production process. The assignment of the thesis is to describe and evaluate pressing process which is the part of posistor production. The first theoretical part contains introduction to the mathematical statistics, verifying assumptions about the data, describing the regression analysis, the analysis of variance and the part of the design of experiment. The second practical part is focused on design, performing and interpreting of experiments. The thesis is developed according to requirements of company EPCOS s.r.o. Šumperk. Statistical program MINITAB Rlease 14, which is supported by company, was used for all computations.
|
|
| |
|
|
Solder Joint Reliability and Wetting Characteristics Influence
Labaj, Radek ; Stejskal, Petr (referee) ; Starý, Jiří (advisor)
This thesis deals with the methodology of testing the wetting characteristics for different material and process effects in the double-plated base material. Testing is performed by wetting balance method. There is designed procedure to calculate the angles on each side of the non-homogeneous material. The Design of Experiments method is used to interpret the results, by using this method are also interpreted electrical and mechanical properties of solder joints. The correlation with wetting characteristics is discussed.
|
guest ::
