|
|
DC/DC converter for car-audio amplifier
Šmarda, Vladislav ; Vorel, Pavel (referee) ; Červinka, Dalibor (advisor)
This Bachelor thesis deals with the design and construction of a resonant switching power supply for car audio-amplifier. The main subject of the theoretical part is the mathematical description of the applied ZVCS Push-Push topology. Also a general guide, for designing this type of topology is mentioned. There is described the optimalization procedure of the main switch mode power transformer with respect to the high efficiency of the proposed power supply. Then the designed power supply is made and tested.
|
|
|
Design of triple laboratory power supply
Gerbel, Patrik ; Kubíček, Michal (referee) ; Brančík, Lubomír (advisor)
This semestral thesis deals with designing triple laboratory power supply. There are three outputs in the device. One of them is built with switching regulator LTM4605 and it‘s output voltage can be regulated in the range of 0 to 6 volts. Maximal output current is 5A. The rest is realized as linear with voltage regulated output of 0 to 30V and adjustable current limitattions in range of 0 to 3 A. Output parameters are registered by double microcontrollers and shown on two LCD displays.
|
|
|
Laboratory power source
Lízner, Václav ; Marcoň, Petr (referee) ; Szabó, Zoltán (advisor)
This bachelor thesis deals with the complete design and realization of the laboratory DC power source. There is designed a power supply with adjustable output voltage from 0 to 30V and with adjustable current limiter up to 3A. All output values are analog controlled, the microcontroller is used only for the voltage and current measuring. This data is shown on the LCD display. The thesis includes also participation of the DC sources, what is focused on the basic wiring of the switching DC sources.
|
|
|
Control of power LEDs
Jaroš, Tomáš ; Florián, Tomáš (referee) ; Kopečný, Lukáš (advisor)
The work deals with controlof high power LED modules. The introductory part shows theory of LED diodes. Next part is dealing with source supplies, their kinds and attributes. Then we deal with possibilities of current limiting. Next chapter shows switching power supplies. Aim of this work is to design wiring for power control LEDs and the resulting implementation by designing a suitable controller.
|
|
|
Optimization of the switching power supplies with synchronous rectifier
Skácel, Josef ; Macháň, Ladislav (referee) ; Žák, Jaromír (advisor)
This thesis deals with switching circuit topic, especially switching power supplies. There are switching circuits without inductance and their benefits presented in the thesis. Basic topologies of switching power supplies, their properties, application area and functions of basic types of converters are also described. The next section focuses on special resonant switching power supplies and synchronous. The main part of the work is carried out simulations using three synchronous rectifiers. The work includes practical design of an SMPS with synchronous rectifier.
|
|
|
Switching charger for car batteries 14.4V/6A
Gábel, Marián ; Huták, Petr (referee) ; Martiš, Jan (advisor)
This bachelor's thesis deals with issue of design of a switching charger for car batteries using a fly-back converter. The fly-back converter and its functions are theoretically described in the first chapter, which also explains use of a modification of a circuit. The modification is used because of its increased efficiency compared to the ordinary loss solutions of a relieving circuit. Subsequently, in next chapter the thesis focuses on design of a power section of the circuit, which involves calculations of the circuit’s elements. Subsequently, the MOSFET transistor control design is performed using the UC3844 integrated circuit. The charger was constructed according to design and its proper functionality was verified by measurements.
|
|
|
Laboratory DC power supply 30V 60A
Gábel, Marián ; Vorel, Pavel (referee) ; Martiš, Jan (advisor)
The master thesis deals with design of a switched DC power supply with output parameters of 30 V 60 A. The power supply uses the connection of two single switch forward converters with opposite phase. The topology was chosen based on a comparison of specific schematics in the first part. The body of the thesis is covered in chapter which deals with design and analysis of power circuits of the converter. The chapter describes detailed design of pulse transformers, dimensioning of semiconductors and cooling system of the converter. For lower power losses, the system of synchronous rectifying is chosen at the output of the circuit. The regulation of the output is based on cascade structure with a superior voltage and dependent current loop. Appropriate over current protection is provided by sensing the output current and using current transformers for primary current measure.
|
|
|
Uninterruptible Power Supply
Kučera, Josef ; Sekora, Jiří (referee) ; Fedra, Petr (advisor)
This bachelor thesis is focused on the proposal for an appropriate source of uninterruptible power supply (UPS) to the school server UBMI where is currently installed HIS (hospital information system) CLINICOM Corporate SMS. UPS should have ensure the protection of data being unfinished, secure off site and to inform the line voltage failure.
|
|
|
Miniature charger for a battery pack Li-ion 14,4V/2Ah
Bartoš, Miroslav ; Huták, Petr (referee) ; Vorel, Pavel (advisor)
This bachelor‘s thesis describes the design chargers for lithium-ion batteries. The proposal includes the selection of suitable converter topologies, design power, control and excitation components and a design of high frequency transformer. In the next part the thesis deals with the BMS, which stands for battery management system. The last part deals with the production of the proposed switching source and BMS. The project documentation for the production of a charger is also provided.
|
|
|
Resonant switched-mode power supply with PFC
Punar, Jan ; Drda, Václav (referee) ; Záplata, Filip (advisor)
This diploma thesis is focused on the LLC resonant power supply with power factor correction. The first part of the thesis is focused on a selection of a suitable controller for the control of this source. Here the emphasis is mainly on efficiency and EMC. The thesis also deals with the design of the scheme and the selection of suitable components. The thesis contains the design of the LLC power supply itself and also the power factor correction circuit - PFC.
|
guest ::
