|
Heating of flat house
Jára, Marek ; Vendlová, Lucie (referee) ; Topič, Jan (advisor)
The theme of this diploma thesis is to design heating of the flat house. The theoretical part of this diploma thesis is about exhaust gases paths. The calculation part of this diploma thesis contains the design of the heating system by panel heaters, floor convectors and underfloor heating system. The heat source is the system of cascade-connected gas condensing boilers. The rest of this part are the calculations of the preparation of hot water, design of hot water storage tank and another necessary equipment of the system. The part Project is about technical report and simulation of behaviour of underfloor heating system in various marginal conditions.
|
|
Steel lookout tower
Kábrt, Michal ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
The aim of the diploma thesis was to make a structural design of steel-load-carrying structure of steel lookout tower, in the grounds of domestic brewery in Humpolec. Lookout tower will be part of newly built centre for customers of the brewery. The layout and shape of the load-carrying structure of steel lookout tower follow the brewery chimney with height of 32.7 m with circular ground plan and outside diameter of 3.5 m in the heel and 2.3 m at the top. The chimney is independent of the construction of the lookout tower. The ground plan and dimensions of the lookout tower were considered taking into account the required spacing of the structure from adjacent buildings and ensuring sufficient dimensions for the required passage between the future lookout tower and the existing building of the boiler room. RFEM was used for calculation internal forces and assessment on individual structural elements, according to the valid Eurocodes.
|
|
Pearl Ústí nad Orlicí
Hyťhová, Martina ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
Main task of the diploma project is design of conversion strategy and revitalization of former textile factory PERLA 01 in Ústí nad Orlicí. The construction program consist conversion of existing building to cafébar, assembly hall, office space, shoping hall, bistro and craftsman´s workrooms. New building is infocentrum, gallery, textilmania, entrance hall of assembly hall, cycling shop, library reserve space and club centrum. The project design new square and public space.
|
|
PEARL Ústí nad Orlicí
Pelikánová, Zuzana ; Kyselka,, Mojmír (referee) ; Nový, Alois (advisor)
Main task of the diploma project is design of basic conversion strategy and revitalization of former textile factory area PERLA 01 in Ústí nad Orlicí. The architecture study itself deals with utilization of a part of the area with most valuable and characteristic attribute. The study links to previous urbanistic – architectural solution of the area. The area is surrounded by new or preserved objects which line of main roads. New public places are created inside of the area with calm pedestrian zones. Selected area is compose of more objects which creating individual diverse group with own character. The main idea was keeping industrial appearance of the building which reflecting important historical period for town, and harmonic connection with new structures or buildings as well. First part is creating by historical buildings nearby big chimney, with mainly administrative use, which are preserved and reconstructed. Together with reconstructed boiler house and engine house which where transform to social hall, was created small square around chimney with dominated steps which created representative entrance. Next part is creating by partly reconstructed or demolished and rebuilding old producers halls. These halls are used for craftsman´s workrooms or as gallery with shed roofing. In the end there is new building created with commercial charge, respecting surrounded buildings and addicting street line with cover arbour with columns . New structure are characterized by the industrial appearance especially by using final surfaced layer of exposed concrete or metal façade formed from aluminum perforated sheet as contrast to existing historical buildings.
|
| |
|
Structural assessment of the reinforced concrete chimney
Teplý, Jakub ; Hasala, Ivo (referee) ; Girgle, František (advisor)
The aim of this thesis is assessment of existing condition reinforced concrete factory chimney, who has undergone structural and technical survey, under which was found many failures caused of horizontally tension - significant vertical cracks in the chimney stack. The object of this work will also make appropriate proposals rehabilitation of concrete stack by design prestressed cables monostrand in horizontal direction, grouting open cracks and reprofiling surface of chimney stack.
|
|
Residential Complex in Brno - Komín
Mrázková, Iva ; Zajíček, David (referee) ; Mikulášek, David (advisor)
Urban concept is based on the hierarchy of the public space, through to semi-private. The entire file is divided into several blocks that constitute the "outdoor rooms", thus ensuring a certain degree of privacy from the outside world, no one would have to close up the house. This arrangement should also promote and outdoors, and encourage mutual interactions among residents.A diverse mix of buildings allows for a greater variety of people who will live here. The structure offers accommodation for single, couple, starting a family or large family with children. At the end of the plot are located villas with luxury apartments overlooking the Chimney. This means that "someone is always home" and social progress and better control of the streets and thereby increasing the feeling of safety.
|
|
Residential Complex in Brno - Komín
Ševčíková, Veronika ; Zoubek, Michal (referee) ; Sochor, Jan (advisor)
Residential complex at the foot of the hill Palacky Brno - chimney . Located on the border of forest and settlements are nowadays allotment . It is an inspiration concept development , whose aim is to preserve the character of the gardens as an added value to housing. The proposal is to land on the structure of terraced houses , which complement the mosaic of buildings along the street hillside pasture. As a reaction to the slope of the terrain creates a garden terrace giving residents plenty of privacy. The rugged structure also creates a benchmark comfortable spaces for meetings .
|
|
Possibilities of Solar Chimney Power Plants
Moravčík, Martin ; Macháček, Jan (referee) ; Procházka, Zdeněk (advisor)
This thesis contains teoretical summary of present situation of problems involved in solar chimneys development. In the first chapter there are mathematical methods for describing the functions of solar chimneys in general. It establishes figures for power output, efficiency, speed of flow inside the chimney and figures for desinging solar chimney. In the next chaper there is a division of solar chimneys and it mainly focuses on describing the solar updraft towers and solar floating chimneys. And marginally it focuses on solar downdraft towers. Next there are possibilities how to use principle of solar chimney for air conditioning and ventilation. In the next chapter it describes the use of solar chimneys, with cogeneration, hydrogen production, in cooling towers and chimneys, and there is also fully described the project in Manzanares. In the fifth chapter it describes the economy of the two comparative projects of solar chimneys, which are at the end economically analyzed and assessed. The last chapter is a summary of the objectives of this thesis, and the subsequent approach is described too and at last there is also evaluation of solar chimneys and the conclusion of this thesis.
|
|
Static solution of concrete chimney
Kašparů, Jakub ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
The goal of this Master´s thesis is a review of a reinforced concrete chimney´s stack and a foundation design based on a combination of M+N load. Two bar models (by ČSN and EN) and one shall model were created to analyze internal forces. The fine element software SCIA ENGINEERING was used to create the models. The loads taken into consideration - for analysis include self weight, lining, temperature, wind, and Karman vortex. The stack was horizontally divided by several cuts which were investigated. The stack and foundation were designed by an algorithm created in the program MS EXCEL. The piles were designed in the program GEO 5. Drawings include - drawings of shapes and drawings of the reinforcement of specifics part of chimney.
|