|
|
Static solution of bearing RC structure family villa
Neužil, David ; Kostiha, Vojtěch (referee) ; Švaříčková, Ivana (advisor)
Master thesis describes design of reinforced concrete structure for family villa. Building is situated to the slope. Only chosen parts of concrete structure was designed and checked for ultimate limit state. Building consist of basemen and two floors. Part of second floor is cantilevered. Cantilevered part was designed according to vertical deflection. Building foundation consist of waterproof slabs. Walls in contact with soil are considered as waterproof, as well.
|
|
|
Floor slab of an apartment building
Nechanická, Klára ; Požár, Michal (referee) ; Perla, Jan (advisor)
This bachelor's thesis focuses on the design of the floor slab and staircase in a multi-story apartment building with monolithic reinforced concrete walls. The emphasis is placed on limiting the footfall noise from the staircase area to the surrounding structures and on eliminating thermal bridging in the balcony slabs. The deformation of the floor slab structure is verified while considering the integrity of the supported ceramic partitions.
|
|
|
Multifunctional house
Dobeš, Josef ; Perla, Jan (referee) ; Švaříčková, Ivana (advisor)
The work deals with an alternative design of the selected parts of the load-bearing structure. It includes preliminary design, structural analysis in a structural analysis software system, design and their assessment.
|
|
|
Static solution of the underground floor of an apartment building in Oslavany
Šafránková, Vendula ; Švaříčková, Ivana (referee) ; Zich, Miloš (advisor)
The subject of the bachelor thesis is the design and static analysis of underground carpark, which is part of an apartment building. This new development will be situated in Oslaveny. For the work was used drawings with a basic floor plan dimension and heights. The work includes a static calculation and drawing documentations. Static calculation is solved by a combination of manual calculation and software´s calculation. SCIA Engineer 22.0 program is used to calculate the internal forces. The design of the shear reinforcement is performed using Schöck Bole program. The static calculation includes design and assessment point-supported slab and columns and caps. The structure is designed according to valid standards ČSN EN.
|
|
|
Static solution of a typical underground floor of a tall building in Prague
Maršálek, Filip ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
This bachelor's thesis deals with the static design of the ceiling structure of a high-rise building. The basis for the bachelor was drawing documentation with basic plan dimensions and heights. The aim of the work is to design a locally and point-supported ceiling slab in the form of a section of one floor, specifically the ceiling above the second underground floor. According to the assigned study, a board model was created in the SCIA Engineer program for the analysis of internal forces, on the basis of which the design of the bending reinforcement of the board was carried out for the limit state of bearing capacity. The design of the shear reinforcement is based on the internal forces from the 2D model and was carried out using the Schöck Bole program with manual verification of selected parts. Furthermore, crack widths were manually calculated and verified via SCIA Engineer. The last calculation was a non-linear deflection calculation in SCIA Engineer. The conclusion of the work was the design of a variant with headers and a comparison of both types of boards. The work includes static calculation and drawing documentation.
|
|
|
Design of the floor slab structure of a tall building
Vintrová, Tereza ; Šimůnek, Petr (referee) ; Zich, Miloš (advisor)
The bachelor thesis deals with the design of the ceiling structure of a high-rise building. The basis for the work was a study of the building with basic floor plan dimensions and heights. The aim of the bachelor thesis is to design a locally supported floor slab with a stiffening core in the middle, as a section of one floor, namely the ceiling above the tenth floor. According to the specified study, a slab model was created in SCIA Engineer to analyze the internal forces based on which the design of the flexural reinforcement of the slab to the ultimate limit state was carried out. The design of the shear reinforcement is based on the internal forces of the 3D model and was done using Schöck Bole with manual verification of the selected column. Non-linear calculation of the 3D model and manual verification of crack widths was used to assess the ultimate limit state. At the end of the work, the design of the circumferential rib variant and the comparison of the two types of slabs was carried out. The work includes a static calculation and drawings.
|
|
|
Apartment building in the gap site
Doupovec, Vojtěch ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis is focused on design of a monolithic reinforced concrete structure of an apartment building situated in a gap site. The foundation is designed on a foundation slab supported by piles, which together with the walls in the basement are made as a waterproofness concrete structure. It is a two-way wall construction system, made in a combination of masonry and reinforced concrete. The structure was assessed for the ultimate limit state and the serviceability limit state. Due to the requirement for waterproofness, the reinforcement was designed for non-force effects at an early stage. The work includes drawings of shapes and reinforcement.
|
|
|
Load-bearing reinforced concrete structure of a family house
Borovec, Michael ; Januš, Ondřej (referee) ; Zlámal, Martin (advisor)
The final thesis is focused on designing reinforced concrete load-bearing structures of a detached house on two floors and one basement. In the basement will be located the storages, utility room and wine bar. On the ground floor will be located garage for two cars, living room with kitchen and study. On the second floor will be located bedroon and two child’s rooms. The ceiling slab of the second floor, the ceiling slab of the ground floor, the ceiling slab of the basement, spiral staircase, half-turn staircase and walls of the first underground floor with solution as water-resistant construction. Programs SCIA Engineer 21.1 and Dlubal RFEM are used to calculate the internal forces. To varify the accuracy of the results is used manual calculation. The work includes drawings of formwork and reinforcement of the all designing structires. The bulding is designed according to ČSN EN 1992-1-1.
|
|
| |
|
|
Structure of apartment building
Řihošek, Jan ; Pulec, Vladimír (referee) ; Perla, Jan (advisor)
The diploma thesis deals with the design of the floor structure of an apartment building in two structural variants. The aim of the work is to find out the internal forces, design and check in two construction variants. Finite Element Method was used for calculation internal forces using 2D model for floor slab and 3D model of building in the Dlubal RFEM 5.24. The work also includes check of masonry walls.
|
guest ::
