National Repository of Grey Literature 87 records found  beginprevious21 - 30nextend  jump to record: Search took 0.00 seconds. 
Proposition of grounding enhancing cement composite mixture
Sochor, David ; Bydžovský, Jiří (referee) ; Drochytka, Rostislav (advisor)
The bachelor thesis deals with the design of a conductive cement composite grounding mixture for protection of building structures in areas with low conductivity. The theoretical part is mainly focused on summarizing the knowledge of the current protection of buildings against lightning and overvoltage. The study includes knowledge in the field of conductive building materials and aims to present the design of a cement composite mixture to improve grounding. Choosing the right raw materials to achieve electrical conductivity. A maintenance-free material has been developed, no humidity needed material while maintaining conductivity. The work it examines the possibilities of using industrial wastes as secondary raw materials. The conclusion focuses on laboratory testing of newly developed materials, summary and discussion of the results. With the developed samples, the resistivity was greatly reduced. The positive effect of ferric dust and carbon particles has been demonstrated.
Rehabilitation technology of embankment dams by using suitable types of waste
Michalčíková, Magdaléna ; Kulísek, Karel (referee) ; Drochytka, Rostislav (advisor)
The subject of this work is to find an optimal technology for repairing existing embankment dams with emphasis on simplicity and ecological scalability. Next, secondary energy and waste materials will be evaluated as a partial replacement of a quality montmorillonitic clay. The aim of this will be to maximize the use of these waste materials. In the end a selection of materials for the locality will be made. The use of appropriate types of waste for repairs of embankment dams with clay based grouting compound technology has a great potential, especially with those dams that are not fulfilling their function due to their age.
Development of ecological insulation materials based on secondary raw materials
Šťastná, Lucie ; Jerman,, Miloš (referee) ; Zach, Jiří (advisor)
The master's thesis deals with the development of insulation material based on secondary raw materials. In the theoretical part an overview of available types of blown insulation is made. The practical part deals with the verification of the key properties of the produced insulator samples. The aim of the thesis is to optimally modify blown insulation based on recycled wood shavings paper.
DEVELOPMENT OF SPECIAL REHABILITATION MATERIALS FOR CONCRETE FOR EXTREME STRESS WITH USE OF SECONDARY RAW MATERIALS
Hodul, Jakub ; Klečka,, Tomáš (referee) ; Ďurica,, Tibor (referee) ; Bydžovský, Jiří (referee) ; Drochytka, Rostislav (advisor)
The doctoral thesis deals with finding the use of some waste and secondary raw materials in the production of special polymer remediation materials for concrete, which could be applied even in constructions, where extreme mechanical and chemical load is occurred. The aim of this doctoral thesis is experimental examination of the possibility of using selected types of waste, including hazardous waste which represent the highest risk to environment, and secondary raw materials as a substitute for the currently used primary fillers in order to reduce the ecological footprint of the product itself. Some types of secondary raw materials, such as filter fly ash contaminated by flue gas denitrification process, are no longer used as a concrete admixture or partial cement substitution due to unwanted release of toxic ammonia (NH3). Mainly for this reason, the thesis deals with the progressive utilization of such types of secondary raw materials as well as with another currently unused waste into polymeric patching, grouting and anchoring materials while preserving or improving the final properties compared to reference materials using only primary raw materials. The result of this thesis is to find out suitable formulations for efficient preparation of special polymeric remediation materials for concrete containing waste and secondary raw materials as fillers. The partial aim of the thesis and a the scientific contribution is an observation of the developed materials internal structure using a modern device, CT tomography, an influence of the filler type on the long-term durability, and last but not least the observation of the rate of pollutants incorporation, found in hazardous waste, into the polymeric matric with the aid of EDX and FTIR analysis.
Utilization possibilities of industry gypsum and secondary materials containing for preparation of composites
Weiglová, Jana ; Šoukal, František (referee) ; Opravil, Tomáš (advisor)
The work studies the possibilities of the utilization of secondary raw materials produced by power industry. It addresses mainly the gypsum by-products and fluidized coal combustion ash. As for the secondary raw materials the content of sulphites is observed and the dependences of their transformation to sulphides via natural oxidation by air oxygen or by addition of adequate oxidant are studied. The work follows with describing the effect of sulphides contained in raw materials on the mechanical properties of composites prepared from several various matrices such as alumina or portland cement, lime or portland clinker. As for pure portland clinker the ability to retard the setting is also observed. The amount of contained sulphites is measured volumetrically via indirect titration of iodine surplus by sodium thiosulphate with the starch size as the indicator.
Possibilities of screed application on oily or wet concrete
Holomčík, Zdeněk ; Melichar, Jindřich (referee) ; Drochytka, Rostislav (advisor)
This thesis studiest he track floor system, the interaction of adhesive bonding compound with a underlaying concrete, which will be contaminated by moisture and oil. For such contaminated surface was designed polymer-cement concrete, which were subsequently tested its properties, in order to determine whether it achieves the required strength of 80 MPa uniaxial compressive and whether it can be applied to wet or oily underlaying concrete. From the results we can say that the newly proposed system achieves the specified requirements and could be applied to damp and oily surfaces.
New possibilities of using secondary raw materials for the renewal of the railway substructure
Buřičová, Karolína ; Luňáček,, Martin (referee) ; Drochytka, Rostislav (advisor)
The work is devoted to new possibilities for the recovery of secondary raw materials and track bed waste with a combination of both suitable and unsuitable soils. The aim of the thesis is to develop a new functional sample suitable for the recovery of a substructure of railways based on secondary raw materials. The theoretical part addresses the issue of the use of soil and secondary raw materials as the base layers of railway structures, and is focused on the possibilities of soil adjustments or enhancement. The practical part is focused on the analysis and selection of potentially suitable raw materials, the design of new raw material mixtures containing concrete recyclables, waste from cleaning the auto mixer and waste from cleaning the rail bed. Further, to modify the mixtures designed with fluid ash from biomass combustion to achieve higher toughness. Then they will be experimentally verified and based on the results the optimal formula for use in the solid of the railway bottom will be determined. Final optimal recipe achieving basic required parameters for use in active zone without the requirement for frost resistance and ecology is composed of 30 % of F4-CS, 4 % of portland cement CEM II-B/LL, 3 % of lime hydrate, 70 % of recycled concrete and 10 % of fluid ash from biomass combustion.
Desin of new technologies for invert grouting of masonry sewer
Dolák, Martin ; Melichar, Tomáš (referee) ; Drochytka, Rostislav (advisor)
The subject of this work is to find optimal grouting mixture for repairing existing brick sewer with insistence on ecological modesty. Secondary raw and waste materials will be evaluated as a partial replacement of good-quality materials, that are commonly used. Production wastes for which is after necessary adjustment found usage in another sphere of production are named secondary raw materials. In the end will be made a selection of appropriate secondary raw materials for a project of new technology of back grouting identified for repairing currently used brick sewers.
Lightweight floors based on aerated concrete and foam concrete with the use of secondary raw materials
Kapčuk, Pavel ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This thesis is oriented on development of new porous materials for industrial floors based foam concrete and not autoclaved aerated concrete with the possible use of secondary raw materials and natural lightweight aggregates instead of classic aggregates. The dry mixture should be stored in bags as ready to use with the addition only of water.
Development of innovative composite systems ETICS on the basis of a new generation of secondary raw materials
Kováč, Michal ; Ševčík, Milan (referee) ; Drochytka, Rostislav (advisor)
This master’s thesis applies utilization of alternative raw materials in thermal insulation system of the ETICS of new generation for houses. The theoretical part dealt with the explanation of the ETICS and the selection of suitable raw material for his innovating. In the following practical part were used selected materials to create a new thermal insulation made of straw and binding materials of cement, casein glue, bicomponent fibers and mushroom mycelium. At the end have been applied the variants of base coat of clay and mineral screed on new thermal insulation, from which was selected the optimal variant. From optimal thermal insulation and suitable base coat was conducted proposal of final version of new ETICS.

National Repository of Grey Literature : 87 records found   beginprevious21 - 30nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.