|
|
Electronic ballast for sodium lamp
Eliáš, Jaroslav ; Vorel, Pavel (referee) ; Huták, Petr (advisor)
The aim is to get acquainted with the way the management and regulation of sodium lamps. This knowledge is then applied to design your own gear. The introductory section describes the basic characteristics of discharge light sources. Their behavior was verified by measuring and findings were used to create diagrams, mainly the control circuit. Theoretical design is developed by individual functional parts of the inverter.
|
|
|
Design of Energy Systems Using Hydrogen as Fuel
Slováček, Adam ; Kermes, Vít (referee) ; Houdková, Lucie (advisor)
The subject of diploma thesis is to gather knowledge in the production and use of hydrogen. This work is devoted to a comparison of the previously existing processes for producing hydrogen, where the vast majority is filled of fossil fuel. Another section is devoted to new materials for the study based on a number of selected patents and the experiment promising new method for decomposition of water. Based on available data will be carried out energy balance and consequently will be drafted energy system using hydrogen as fuel. In conclusion will be future possibilities evaluated in the field of hydrogen energy.
|
|
| |
|
| |
|
|
Verification of the model for predicting the properties of the combustion process
Horsák, Jan ; Kilkovský, Bohuslav (referee) ; Jegla, Zdeněk (advisor)
This work thoroughly analyzes a previously created computational model for predicting characteristic properties of the combustion process in an experimental combustion chamber. Any found shortcomings of the original model are removed and the model is further improved prior to its application on 11 real cases of combustion tests performed at various conditions and with various fuels. Data provided by the model are confronted with the data obtained during the combustion tests and the model accuracy is evaluated, based on local heat flux along the length of the combustion chamber. Finally, the overall usefulness of the model is determined by the means of evaluating the acquired accuracy values, and further possibilities of model improvement and use are presented.
|
|
|
Design of combustion chamber 30 kW for gaseous fuels
Rychter, Aleš ; Hudák, Igor (referee) ; Skryja, Pavel (advisor)
Master thesis deals with design of combusting chamber for gaseous fuels with predicted thermal output less than 30 kilowatts. Designed equipment will be used as a generator of flue gases with required parameters further used for experimental catalytic unit. Due to the need of draft creation inside the combustion chamber and exhaust pipe is master thesis also deals with design of ejector nozzle, which will be used for this purpose. Opening chapters of this work, considering a theoretical part, are focused on basic classification of combustion chambers and industrial burners. Next and main chapter is dedicated to main goal of this work, which is combustion chamber design, containing necessary calculations divided into balance calculation and construction design. Final chapters deals with above mentioned calculation of ejector nozzle ensuring sufficient draft and also sufficient cooling of flue gases incoming from catalytic unit.
|
|
|
Condensing technology and flue gas
Müller, Jan ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
This thesis is developed as a proposal for heating for a primary school and kindergarten in the region of Brno-countryside. For the insulated building, a combination of heating and air-conditioning is proposed. The concept is designed so that the air-conditioning preheats the exterior air and the heating system warms the incoming air to a comfortable temperature. For the required thermal performance, sources of heat (for gas and pellets) and a layout solution for the boiler room is designed. Drainage of combustion products is proposed for both solutions. The project solution is per the extent of the construction permit. The theoretical part is linked with the practical part through the condensation boilers, their function and division, and drainage of combustion products. The experiment for the given topic was conducted on the drainage of combustion products. The pressure loss of the reverse knob was determined in relation to the flow rate of air in the condensation boilers as this loss is essential in assessing the drainage of combustion products.
|
|
|
Burners for liquid and gaseous fuels
Zaidullina, Liliia ; Baláš, Marek (referee) ; Kracík, Petr (advisor)
This Bachelor’s thesis is focused on the burners for liquid and gaseous fuels, primarily on the ones that are used in industrial technological equipment. This is a detailed research of available sources including publications and websites in order to describe the classification and construction of burners and their operation and also standards that must be observed. Three main objectives were defined for the paper. The first one is to describe the different types of burners, the basic construction concept of the burners on liquid and gaseous fuels. Usually, the construction of the burner depends on technological conditions of their application. The second objective is to describe the legal standards and basic parameters of the burners. These standards are applicable to industrial burners for gaseous and liquid fuels, which burn with mixture air and fuel. The standards cannot be applied to the burners, in which the additives such as electric or acoustic energy and oxygen. The third objective is to describe the method of offering and calculating burners.
|
|
|
Testing facilities for burner testing
Sobočík, Robert ; Hájek, Zdeněk (referee) ; Bělohradský, Petr (advisor)
This Bachelor’s thesis is focused on testing facilities intended for burner testing. It deals with a thorough research of accessible material including specialist technical literature and relevant websites in order to gather any available information on current burners and monitor present situation in the market, as well as to provide new information on burner testing facilities and collecting, processing and evaluating the data gained in testing process in Czech and foreign companies.
|
|
|
Domestic gas boilers
Haluza, Jakub ; Fiedler, Jan (referee) ; Pospíšil, Jiří (advisor)
The aim of this bachelor thesis is to compile the summary of domestic gas boilers, their structure, performance and controls. Then to elaborate the technical-economic comparison of below named methods of heating for the concrete object.
|
guest ::
