|
|
Influence of temperature on lead acid batteries lifetime
Kopečný, Martin ; Bača, Petr (referee) ; Neoral, Jiří (advisor)
Lead –acid batteries are the most common type of secondary cells used in automotive industry. This diploma thesis deals with the influence of temperature on their lifetime. In the preamble of this work is shortly described their history, division, construction and processes during battery operation. There are noted unfavorable phenomena which have an impact on increasing the temperature inside the battery. The first experimental part is devoted to evaluation the effects of addition on the temperature rise during charging. The second part is focused on conditions simulation in hot areas at the temperature above 30 °C and effects of this temperature on the function of lead – acid batteries.
|
|
| |
|
|
Functional blocks for the development of autonomous photovoltaic system
Ovesný, Karel ; Křivík, Petr (referee) ; Bača, Petr (advisor)
The project considers realization system, which will allow us to test six different operation modes on lifetime accumulators. The system will link to computer, which will execute measurement current and tension and switch betwencharging and discharging modes. The measured values will record in someone time intervals in to computer memory. After someone time will analise these measured valuer and will provide optional operation mode.
|
|
|
The inverter based battery charger
Kadlec, Josef ; Pazdera, Ivo (referee) ; Červinka, Dalibor (advisor)
The aim of this master’s thesis is provide detailed information about car battery’s charger with a switching power supply. The kind of this power supply is one-pulsed conducting inverter with transformer. The charger’s rates of nominal voltage are 6 and 12 V. The method of charging is charging by constantly voltage with a current limitation. The values of a current limitations are 0.5A, 5A and 20A. The charger’s maximal current is 50A. This current can help to the accumulator with starting of a vehicle. This device is equipped by indicators which indicate the end of charging.
|
|
|
Investigation causes of the premature capacity loss in accumulator for hybrid electric vehicles
Vystrčil, Marek ; Bilko, Radek (referee) ; Bača, Petr (advisor)
This thesis describes the results of two successive experiments. The first was focused on the influence of impurities in the active mass of negative electrode in PSoC (Partial State of Charge) mode, which simulates the conditions occurring in HEV (hybrid electric vehicle). In the second experiment, cells with the same additives were exposed to optimum downforce 4N/cm2, by which we wanted to prove the influence of pressure on life of VRLA (Valve Regulated Lead Acid) cells working in operating HEV conditions.
|
|
|
Investigation of temperature change in lead-acid accumulator for HEV
Tošer, Pavel ; Křivík, Petr (referee) ; Bača, Petr (advisor)
The oldest and also most used type of secondary cells is lead-acid accumulator. Basic functional principle stayed same as in foundation time, only operation parameters are still improving (for example one of the most important is lifetime). Significant technical problem is temperature of lead-acid battery and her influence on functionality and running reactions. Master thesis is focused on this section, when is necessary to evaluate new pieces of knowledge in development. The work deals with description existing types of accumulators, further deals with theory of temperature balance and in the end by measured datas and theirs analyzing.
|
|
|
Investigation size effect of negative active mass additive on service life lead-acid accumulator.
Mikoláš, Jiří ; Novák, Vítězslav (referee) ; Bača, Petr (advisor)
The task of research work is to study new mechanisms and to minimize disturbance of lead batteries for hybrid electric vehicles. Those arising under the PSoC (Partial State of Charge) and is linked to irreversible sulphation mainly negative electrodes. As one solution to prevent sulphation of the negative electrode appears to be the active ingredients in a negative matter. In the investigated electrodes is verified the influence of carbon, titanium dioxide and silica on the grain size of the order of nanometers.
|
|
|
Development control programme for autonomous fotovoltaic system
Janáč, Stanislav ; Vaněk, Jiří (referee) ; Bača, Petr (advisor)
The project considers realization system, which allows us to test six different operation modes on lifetime of accumulators. The system will be connected to computer, that will perform measurement of current and voltage and switch betwen charge and discharge modes. The measured values will be recorded in certain time intervals to computer memory. After some time these measured data will be analised and the most optimal operational mode will be set.
|
|
| |
|
|
Solar charge controllers for off-grid systems
KRČKA, Pavel
This diploma thesis deals with photovoltaic rechargable regulators used in isolated, or off-grid photovoltaic systems. First, basic types of off-grid installations, including their functions and applications in practice are described. Then, possibilities of electric energy accumulation in photovoltaic systems are mentioned, considering actual, accesible technologies. Matters of electric energy accumulation in leaden accumulators are examined in detail. Main part of the diploma thesis is about electronic designs of photovoltaic, also called solar, rechargable regulators. These are the main connecting part between photovoltaic panels, accumulator, but also often connected charge, which is appliance. Individual electronic regulators concepts are described narrowly, then compared and evaluated in thesis´ conclusion.
|
guest ::
