|
|
Selected structural detail of the reinforced concrete frame
Teplý, Jakub ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The bachelor thesis solves and compares between them three methods (ČSN EN 1992-1-1, ČSN 73 1201, MC 2010) of punching shear slabs. In this thesis are the methods analyzed and compared with each other. In other part of thesis is solved and compares dependence of the required shear reinforcement areas on the various parameters, for example thickness of slabs or percentage of reinforcement. Conclusion provide an evaluation of the results and compared in charts course of dependence of the required shear reinforcement under the same conditions state.
|
|
|
Reinforced concrete structure
Zatloukal, Bohuslav ; Bažant, Zdeněk (referee) ; Šulák, Pavel (advisor)
This bachelor project is focused on the design of monolithic reinforced concrete ceiling structure of the first floor of a hotel and creation design documents of the load-bearing elements. The load-bearig elements (ceiling slab, outer rib, column and core wall) are appraised according to ultimate limit state. For calculation of internal forces was used a software named RFEM and the internal forces were verified by simplified manual method. Assessment is done according to ČSN EN 1992-1-1.
|
|
|
Reinforced concrete structure
Zdražilová, Pavlína ; Matušíková, Anna (referee) ; Šulák, Pavel (advisor)
This bachelor thesis deals with design and assessment of chosen parts of load-bearing reinforced concrete cast-in-place structure of a department store. The aim of this thesis is to design and assess the reinforced concrete structure of a slab above first floor and one column. Scia Engineer 14 computational software was chosen to model the structure and to obtain the international forces. The structure is designed according to ČSN EN.
|
|
| |
|
|
Reinforced concrete structure of the apartment building
Ilčík, David ; Čairović, Dorde (referee) ; Šulák, Pavel (advisor)
The bachelor thesis is aimed for design and assessment of reinforced concrete locally supported monolithic slab and one selected column of a apartment building on the ultimate limit state. Another point of this work is to develop appropriate drawings. The apartment building has four above ground floors. Assessed slab is located on the second floor a column on the first floor. Internal forces are calculated using software Scia Engineer 2013. The Results of the software are compared with the results of the simplified manual method. The structure is designed according to ČSN EN.
|
|
|
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
|
|
| |
|
| |
|
| |
|
|
Reinforced concrete structure of an office buildings
Přikryl, Martin ; Šimůnek, Petr (referee) ; Šulák, Pavel (advisor)
The bachelor project is focused on the design of monolithic reinforced concrete ceiling slab of typical floor of an administrative building. Calculation of internal forces is carried out in a computer software SCIA Engineer with manual verification using the simplifield method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
|
guest ::
