|
|
Analysis of behaviour of reinforced concrete slab
Kubínek, Michal ; Bažant, Zdeněk (referee) ; Zich, Miloš (advisor)
Bachelor thesis describes the analysis of behavior of existing reinforced concrete slab, locally supprorted, ceiling in hospital including 2nd limit state. Calculation od internal forces was made by computer program SCIA Engineer. Several models were made, model with best behavior due to real construction was used for dimensioning. Each model was compared with manual calculation by equivalent frame analysis. After finding inconvenient deflection, especially due to connected construction, new design was made. Thickness of slab was increased and new design of reinforcement was made. New construction was verified for both limit states.
|
|
| |
|
|
Reinforced concrete structure of a administrative building
Januš, Ondřej ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The main subject of this bachelor thesis is focused on the design of reinforced concrete locally supported slab of a multifunction building. Internal forces are calculated by a computer software SCIA Engineer and its resultes are compered with simplifield method. Another part includes the design of a reinforced concrete stairway and a column situated in the center of the disposition. The calculation method is based on ČSN EN 1992-1-1.
|
|
| |
|
|
Ceiling slab over the corner windows
Tuchyňová, Andrea ; Zich, Miloš (referee) ; Strnad, Jiří (advisor)
This bachelor thesis concerns design of reinforced concrete ceiling slab with girder above the corner windows. The slab has rectangular floor plan with large opening in the middle. The slab is dimensioned to the ultimate limit state and serviceability limit state. The inner forces on the bar model were assessed by force method and were compared with inner forces on spatial model created in Scia Engineering programme.
|
|
| |
|
|
Reinforced concrete structure of an office buildings
Přikryl, Martin ; Šimůnek, Petr (referee) ; Šulák, Pavel (advisor)
The bachelor project is focused on the design of monolithic reinforced concrete ceiling slab of typical floor of an administrative building. Calculation of internal forces is carried out in a computer software SCIA Engineer with manual verification using the simplifield method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
|
|
|
Reinforced concrete structure of a multifunction building
Marková, Anna ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of this qualification thesis is to design a reinforced concrete monolithic ceiling construction of typical floor. It concerns locally supported panel that is 250 mm thick and of irregular shape. The spread of the span is 6 x 6 m with the overshoot of 1,2 m. Inside the building there is a staircase with a lift and a plumbing stack that is surrounded by the monolithic reinforced concrete wall that is 300 mm thick. The structural height of the floor is 3500 mm. The pillars` cross-sections are 450/450 mm. An analysis using the end-element method, a static design and a drawing documentation of the ceiling panel were conducted within this thesis.
|
|
|
Administration Building in Brno
Kurpel, Juraj ; Podroužková, Božena (referee) ; Jeneš, Rostislav (advisor)
The aim of this thesis is a design of a reinforced concrete Flat Plate Slab of an office building up to the limit state of it's ultimate limit state. The content of this work is a static calculation of the slab, and to work up a drawing documentation and details. Calculation of internal forces is implemented in SCIA Engineer and verified using the summation of moments method. The slab is located above the first floor. The work also includes review of the internal column.
|
|
| |
guest ::
