|
|
Prefabricated reinforced concrete structures industrial hall with administration
Sitta, Martin ; Šulák, Pavel (referee) ; Zlámal, Martin (advisor)
As the main topic this thesis describes the design and evaluation of selected reinforced concrete members of the prefabricated reinforced concrete industrial building with administration at ultimate limit state in accordance with applicable standards. Movable overhead crane with carrying capacity of 50 tons is the main distinction of the industrial hall. Lateral frame whit main structural parts which are roof prestressed girder, load-bearing column supporting the overhead crane and drilled pile transferring loads from the upper construction to the load bearing subsoil, is designed in particular. Furthermore, design of the Gerber beam which forms the slab construction in the administrational part of the building is elaborated. Structural design and evaluation of other structures of the building is not part of this thesis.
|
|
|
Design of underground garage under the block of flats
Císařová, Kateřina ; Hrubý, Tomáš (referee) ; Klusáček, Ladislav (advisor)
As the main topic this thesis describes the design and evaluation of selected reinforced concrete members of the underground garage construction of the administration building at ultimate limit state and also at serviceability limit state, both in accordance with EC2: Design of Concrete Structures. Designed members in particular are monolithic slab, girders and columns. Structural design and evaluation of other structures of the building are not part of this thesis. The text part of the thesis concerns the descriptions of analysed structures and also the descriptions of the loads acting on them. Method of designing of the structures, methods of calculating of inner forces, and also the method of modelling the structure in software SCIA Engineer are herein further described. The annexes are mainly structural analysis, which expresses the knowledge obtained from the theoretical part of this thesis, and the drawing documentation.
|
|
|
Cranked ceiling slab
Maršalová, Jiřina ; Koláček, Jan (referee) ; Strnad, Jiří (advisor)
This bachelor work deals with the suggestion of spatially cranked concrete plate of family house and spiral staircase. The concrete desk of asymmetrical shape, which is reinforced in both directions, creates a ceiling construction of basement and is simply supported on the perimeter walls. The construction is dimensioned to the limiting state of carrying capacity and usability. Software programme RFEM 4.10 has been used for the calculation of internal forces.
|
|
|
Reconstruction of the bridge in the town Ledeč nad Sázavou
Lidmila, Ladislav ; Krejčík, Vladimír (referee) ; Klusáček, Ladislav (advisor)
Diploma thesis deals with reconstruction of old beam bridge in town Ledeč nad Sázavou. Three variants of reconsttruction were done. Detailed structural design report was done to one of them, streithening with post-tensioning. Calculation of load effect was solved with finite elemet method via software on grillage model. Construction was checked on ultimate limit state and serviceability limit state. Necessary drawings were elaborated to chosen method.
|
|
|
Precast concrete frame construction
Košík, Ondřej ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of the final thesis is to design and structural design report of selected elements of prefabricated storage hall. Processing of foundation drawing, element composition and for each designed element formwork drawing and reinforcement. It is a single-storey hall, where the main structural system consists of a transversal frame columns and prestressed girder. In this final thesis I designed and structural assessed prestressed girder, reinforced concrete purlin, roof bracing, column, grade beam and foundation pad. The calculation software Scia Engineer is used to calculate the effects of internal forces. The results are compared using a simplified method. The design and structural assessment are made according to valide standards. The designed construction complies with the limit state of ultimate and serviceability.
|
|
| |
|
|
Cast-in-place tank of sewage plant
Lidmila, Ladislav ; Šulák, Pavel (referee) ; Strnad, Jiří (advisor)
Bachelor's thesis deals with structural design and check of cast-in place tank of sewage plant. Solved elements are floor slab, walls and foundation slab. Calculation of load effect is done three methods: manually, per tables and finite element method per software. Elements of tank are checked on ultimate limit state. Load-bearing capacity of subsoil and settlement of tank are checked too. Next are processed reinforced drawings and formwork drawing.
|
|
|
Reinforced concrete aeration tank
Vlach, Jakub ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The aim of this work is to design and static analysis features open embedded aeration tank wastewater treatment plants, in particular the assessment base plate and exterior walls. On the basis of reports is prepared drawings consisting of reinforcement drawings and drawing shapes. The proposal was made on the values of the internal forces of the outputs of computer program SCIA Engineer 2012-Student Edition.
|
|
|
Design of concrete structures reinforced with non-metallic FRP reinforcement
Golisová, Michaela ; Januš, Ondřej (referee) ; Kostiha, Vojtěch (advisor)
This diploma thesis investigates the design of concrete structures reinforced with non-metallic FRP reinforcement with a focus on solving the bearing capacity in extrusion. The work is divided into a theoretical and a practical part. The theoretical part begins with an introduction to FRP reinforcement and a description of shear stress. The following is an introduction to current approaches dealing with this issue. In the practical part, in connection with these regulations, parametric studies are developed to compare the influence of individual input parameters and selected regulations. The last part is dedicated to the design and nonlinear analysis performed in the ATENA software.
|
|
|
Cast-in-place tank of sewage plant
Strnad, Stanislav ; Bažant, Zdeněk (referee) ; Strnad, Jiří (advisor)
This bachelor’s thesis deals with design and static assessment of concrete cast-in-place tank of sewage plant. Specifically the calculation and assessment of the base plate, external and internal walls, and floor slab. In addition elaboration of formwork and reinforcement drawing of solved structural elements. The concrete part of cast-in-place tank of sewage plant is below ground level. Static analasis and calculation of internal forces was solved in Scia Engineer 16.0.2038 – student version.
|
guest ::
