|
| |
|
|
Ground retaining structure for cut & cover metro station in Qatar
Kočičková, Veronika ; Račanský, Václav (referee) ; Uhrin, Michal (advisor)
The aim of this thesis is to assess the geological conditions and durability of the cut and cover metro station in Qatar. Furthermore, the thesis deals with the construction sequence and structural checks of selected elements of the structure. The geological conditions were evaluated on the basis of an extensive geotechnical investigation that was conducted at the construction site. This research also gave necessary information for durability design. After the assessment of the ground conditions in the thesis, it was possible to choose suitable retaining walls and lateral support system and continue with a plan of construction sequence. A diaphragm wall and mezzanine level prop were chosen for the structural check. In case of the wall, the main load was caused by bending moments of a big significance, therefore the wall was designed to the envelope of these moments obtained from software Plaxis. Furthermore, it was necessary to consider the interaction of bending moments and normal forces for the design of the prop. For both elements, reinforcement of bigger diameters was designed.
|
|
|
Administrative building Lomnického - Building technology preparation of construction
Hanzlík, Vlastimil ; Kopecký, Lukáš (referee) ; Biely, Boris (advisor)
This diploma thesis focuses on the construction and technological preparation of the office building in the Lomnického street. The aim of this work is to choose the appropriate construction process. The thesis contains a technical report of a construction and technological project, solutions of wider transport relations, time and financial object plan, itemized budget, design of a site equipment, design of the main building machines and mechanisms, time schedule, technological regulation, inspection and test plan, calculation of two options of the excavation of building pit and details to waterproofing of the substructure. In detail, the thesis is dedicated to secure the building pit enclosed by diaphragm walls.
|
|
|
Modelling of diaphragm walls using time-dependent elasto-plastic material model
Šindelářová, Daniela ; Kotačková, Alena (referee) ; Chalmovský, Juraj (advisor)
The goal of this thesis was the verification of the advanced time-dependent elasto-plastic material model for modeling diaphragm walls. Currently, this type of construction is solved usually with a combination of linear-elastic volume and plate elements. To express time-dependent behaviour, there are both, volume and plate, elements active in short-term conditions, then only volume elements in long-term conditions, while plate elements are deactivated. In this thesis, the Shotcrete material model, which can capture the time-dependent behaviour without combining two types of construction elements, is used. First, a theory of time-dependent behaviour is presented and a design of concrete structures by Eurocode 2 is discussed. Next, the Shotcrete material model is described, then used for modeling a biaxial test and calibration of compression and bending test. Following the gained knowledge, a real boundary value problem of deep excavation supported by diaphragm walls with the strut was solved. To calculate values of the internal forces and horizontal deformation in diaphragm walls, three types of material models are used.
|
|
|
Administrative building Lomnického - Building technology preparation of construction
Hanzlík, Vlastimil ; Kopecký, Lukáš (referee) ; Biely, Boris (advisor)
This diploma thesis focuses on the construction and technological preparation of the office building in the Lomnického street. The aim of this work is to choose the appropriate construction process. The thesis contains a technical report of a construction and technological project, solutions of wider transport relations, time and financial object plan, itemized budget, design of a site equipment, design of the main building machines and mechanisms, time schedule, technological regulation, inspection and test plan, calculation of two options of the excavation of building pit and details to waterproofing of the substructure. In detail, the thesis is dedicated to secure the building pit enclosed by diaphragm walls.
|
|
|
Návrh podzemní stěny ovlivněné výkopem z obou stran
Kočičková, Veronika ; Polák, Barnabás (referee) ; Uhrin, Michal (advisor)
The aim of this thesis was simplified design of diaphragm wall affected by excavation from both sides. This wall is a part of temporary shaft that serves for exchange of tunnel boring machines and at the same time it is a permanent structure of an adjacent metro station. Part of the thesis deals with description of construction sequence of diaphragm walls, excavation of the shaft, excavation of the adjacent metro station and following construction of metro tubes and backfilling of the shaft. Inseparable part of the thesis is assessment of geological conditions and geotechnical parameters. Furthermore, a study on temperature loads on struts was carried out and the results of the study were used for design of the struts. To fulfil the requirements of the assignment several models of the shaft structure and adjacent metro station were built in program Plaxis and one model of the diaphragm wall of the shaft was created in program Geo5. The model outputs were subsequently compared to each other. Furthermore a model of lateral support frame was created in program Scia Engineer. Outputs from programs Plaxis and Scia Engineer were used as a basis for design checks of the structure. The design checks were done according to Eurocodes. The diaphragm wall and the lateral support frame were designed to support the loads considered in this thesis. In order to simplify the calculation variable loads from construction machines were not considered and the only variable load considered was the temperature load on struts. Lateral support frame was also designed to accidental load – loss of a strut.
|
|
|
BUT Technology Transfer Center
Muroň, Jakub ; Štikar, Jaroslav (referee) ; Nový, Alois (advisor) ; Skála, Jiří (advisor)
The Bachelor’s Thesis is based on the architectural study done in the summer semester of the third year of bachelor’s studies of the topic Technology tranfer cetre BUT in Brno. Area of Technology transfer centre of BUT (Brno university of technology) is composed of three separated units - two production complexes and main buidling, which is used for administration in first floor and laboratories in second floor. Design is conditioned by two criteria - an adaptation of objects structure to configuration of terrain and a flexibility of function and logistic. Solution to these issues was to create main communication connected with existing communication. It provides easy and fast logistic service for the production complexes. Shape of the buildings follows contour lines. Due to dynamic shapes I designed simple industrial monochromatic facade, which allows an experimentation with the mass of the building. Line of the flat roof was broken by simple skylights. Strip windows potentiate horizontality in contrast with the main building, which has vertically based character. Industrial character of the complex was accentuated by using metallic facade and prefabricated concrete construction.
|
|
|
Foundation design of River Garden III in Prague
Malinský, Martin ; Boštík, Jiří (referee) ; Svoboda, Petr (advisor)
The topic of this master's thesis are the design of ensuring foundation pit and foundation of administrative building in Prague. In the vicinity of foundation pit is situated the river Vltava, which directly influences the ground water level at the job site. During construction, it is necessary to envisage the possibility of occurrence of the old building structures of docks.
|
|
|
The design of multi-storey building
Hardubej, Martin ; Girgle, František (referee) ; Švaříčková, Ivana (advisor)
The aim of the thesis is the design and assessment of selected elements of a new build multi-storey office building. The supporting structure of monolithic reinforced concrete skeleton is modeled SCIA Engineer and burdened set load cases and combinations. The outputs of the internal forces of the calculation program are dimensioned selected elements. Selected elements include locally supported slab, columns, column shoes, basement wall and footing still. The thesis is selected reinforced concrete elements assessed on the ultimate limit state. The output of this work is static calculation of individual elements. Another part of the output consists of drawings solved elements.
|
|
|
Design of underground garage in Brno
Hájek, Jan ; Hladík, Pavel (referee) ; Zich, Miloš (advisor)
The goal of the project is behaviour and dimensioning of selected monolithic concrete structure elements. Design and assessment of the building foundation was made. Slabs of the floors are dimensioned in detail. All computations are made in accordance with Eurocode 2. Drawing documentation is part of this project.
|
guest ::
