|
Comparison of modal properties of steam turbine impeller with blades of different lengths
Havlásek, Michal ; Chromek, Lukáš (referee) ; Lošák, Petr (advisor)
The presented master's thesis deals with the safety assessment of several variants of the impeller with different blades length. The motivation for creating this thesis is to find the solution of the problem situation which is characterized by the breakdown of the steam turbine impeller with blades length of 30mm. As confirmed in this thesis, the impeller with blades length of 30mm is operated in the resonance. Likewise, according to the technical standard ČSN EN ISO 10437 its operation is not safe. As the correction action for the problem situation solving is proposed the prolongation of the impeller's blades. The safety is detected for six variants of impeller with dierent blades length. For each variant, there is executed a modal analysis and its results are drawn up into the Campbell diagram. On the basis of this diagram, the safety of individual components is evaluated. The last part of the masters thesis concerns with the examination of the influence of blades length on the modal properties of the impeller.
|
|
Creation of Modal Parameter Estimation Application for Experimental Modal Analysis
Ondra, Václav ; Žatko, Miroslav (referee) ; Lošák, Petr (advisor)
The aim of this diploma thesis is a creation of modal parameter estimation application. Modal properties (natural frequencies, damping factors and mode shapes) are used in many dynamics analysis and their accurate determination is very important therefore the modal parameter estimation is one of the most significant part of the experimental modal analysis. Many methods have been developed for modal parameter estimation, each of them with different assumptions and with different accuracy. In the beginning of this thesis, a theory connected with modal analysis and a theory which is necessary for understanding to presented modal parameter methods are given. Then four different modal parameter estimation methods are presented - Peak Picking, Circle Fit, Least Square method and Eigensystem Realization Algorithm. The application for the modal parameter estimation is the output of this diploma thesis. In addition, the application allows performing all experimental modal analysis such as estimation of frequency response functions, animation of the found mode shapes, different kinds of comparison etc. In the conclusion, three structures are shown on which the application and modal parameter estimation methods were tested.
|
|
Structure modeling of mechatronic systems with spot welds and their influence on the eigen frequency
Gajdík, Michal ; Hadaš, Zdeněk (referee) ; Vosynek, Petr (advisor)
This bachelor thesis examines various types of spot welds in Ansys Workbench 13. In first chapter of this thesis are described theoretical foundations of simulation modeling. In following phase are analyzed each methods of simulation modeling. Practical part is about realizing different types of spot welds and examining their impact on clamped boards. Outputs of this thesis are modal abilities of each executed type of spot weld. On attached CD are program annex and project in Ansys Workbench 13. The goal is to analyze differently modeled spot welds, displaying primal deflections and comparison of modal abilities.
|