|
Production of exhaust pipe
Frňka, Martin ; Peterková, Eva (referee) ; Císařová, Michaela (advisor)
This work introduces a design of a technology of producing an exhaust pipe. It's semi-finished product is a pipe about a diameter of 76 mm, and the thickness of it's side made of steel 11 320 is 2 mm. Based on a literary study of problematics of bending there was designed bending by minding with a ball thorn and an exterminator. The whole bending set will be fixed to a machine ELECT 150. The procesed production process includes chopping after bending on a circular saw which is followed by insertion of a complete product on a pallet.
|
|
Manufacturing of metal yoke of electrical socket by compound tool
Svozilová, Lucie ; Řiháček, Jan (referee) ; Peterková, Eva (advisor)
The project elaborated design of technology production of the metal yoke of electrical socket made of steel DX51D + Z200 by compound progressive tool. Stock material for series of 200 000 pieces is a strip of coil. Manufacturing is realised in five steps consist of cutting, bending and flanging. For flanging was constructed a special mechanism for whose is necessary to use hydraulic counterholder, which is sold as a special peripheral equipment of manufacturing machine. The machine choice was adapted to this criterium. The servopress DSF-N1-800A was chosen as a manufacturing machine, which is made by AIDA company. The press can produce force of 800 kN and make work of 4000 J. Selling price of a one yoke is 24,5 Kč when the profit is one hundred percent. The break-even point comes with 58 140 made piece.
|
|
Manufacturing of the turnbuckle of chain
Ondráček, Pavel ; Jopek, Miroslav (referee) ; Peterková, Eva (advisor)
The diploma thesis is focused on the design of the production technology of a chain tensioner. It is a spatial component made of 1.5 mm thick steel sheet with galvanized surface treatment. DC01 steel was selected as the most suitable material. When considering the production technologies, the production in a combined process tool was selected as the most efficient one for the series of 20,000 pieces. Regarding the tool of more complex design including springs, the production will be done in four steps on the LEN 63 eccentric press with accessories used for feeding and unwinding the metal sheet belt from the coil. The final price of the chain tensioner including the bolt and two nuts is 26 CZK.
|
|
Forming technologies of non-ferrous materials
Zuhla, Michal ; Dvořák, Milan (referee) ; Císařová, Michaela (advisor)
This work is focused on the surface forming, in particular, non-ferrous metals. There are described methods of cutting, drawing and bending. For each of these methods are listed and summarized the issues. There are also given individual production technologies cutting, drawing and bending, along with examples of products and their use. The work is complemented with an overview of the most important non-ferrous metals. For these metals are described their properties, suitability for molding and their alloys.
|
|
Production of joint folded out the rule
Šoukal, Hynek ; Podaný, Kamil (referee) ; Žák, Ladislav (advisor)
Project developed within the bachelor study presents a proposal production technology of joint folded out the rule from construction steel 12 060. Thick is 0,5 mm and the production ran is specify at 30 000 units a year. In accordance with literature studies and by calculations have been designed a combined roll forming tool, which consists of a rack with two pillars. This tool will be fix in on eccentric press LEN 10C by SMERAL, Trnava, with nominal press force 100 kN. Trimming punches, holding punch and bending puch are made of tool steel, grade 19 436.3. Lower functional part of the tool ass well.
|
|
Manufacturing of a Cable Holder
Šimka, Radek ; Žák, Ladislav (referee) ; Řiháček, Jan (advisor)
The bachelor’s thesis proposes a design for the production technology of the cabling holder, situated in the outdoor part of the air conditioner. This product is made of steel sheet DC01 with a thickness of 1 mm. The production of this holder is set to be 200 000 pieces per year. A progressive die tool was selected as the most suitable type of production technology, based on a literature study of various production technologies. This enables to combine cutting and bending of steel sheets with the use of one tool device. Manufacture will be performed using a mechanical eccentric press LEN 63 C. All the necessary requirements of this device are satisfactory for the production.
|
|
The Antenna Bracket Manufacturing by a Compound Tool
Lipka, Ondřej ; Lidmila, Zdeněk (referee) ; Peterková, Eva (advisor)
This master’s thesis focuses on the concept of large-lot manufacturing of sheet metal component made from DC01 steel. Based on forethought, the method of compound tool combining shearing and bending was chosen. The theoretical part analyses used technologies in detail. In the next part specific course of manufacture was created and supplied with technological calculations. Based on all needed facts the tool was designed and after that forming machine, LDC 160 crank press, was chosen. At the end the usability of designed concept was confirmed with economical calculations.
|
|
Corner fitting manufacturing by compound tool
Loukota, David ; Žák, Ladislav (referee) ; Peterková, Eva (advisor)
Project have for purpose propose acceptable technology for manufacturing corner fitting by compound tool. Corner fitting is made from steel sheet 11 321.1 thickness 1,5 mm in production set 600 000 pieces in a year. Was select variant with manufacturing compound tool, which make to part on four steps on automatized manufacturing line. This line includes press about power press 1000 kN, feeding and levelling serving and containing rewinder. In economic results are calculated costs production of a piece, final costs and break-even point which is coming after production 216 049 pieces.
|
|
Form shim manufacturing by compound tool
Bartoš, Martin ; Císařová, Michaela (referee) ; Peterková, Eva (advisor)
Purpose of this diploma thesis is a design of a compound tool for manufacturing the form shim. The form shim is made by shearing and bending technology from steel sheet 11 343.1. Thickness is 2 mm. On the basis of a literary study and design calculations was designed the compound tool, which will manufacture this component by 4 actions on the automated line containing rewinder, feeding levelling machine and eccentric press with designed compound tool. Economic calculations show that the designed manufacturing is profitable.
|
|
Manufacturing of the support arm
Melichar, Ivo ; Staněk, Vojtěch (referee) ; Podaný, Kamil (advisor)
The thesis introduces a design for the technology of manufacturing the supporting arm used for positioning and rigidity of the front plate in relation to the metal socket in the container box. The arm is made of a 2 mm thick steel sheet and of a quality according to ČSN 411331 in a production series of 14,700 units / year of the left modification and 14,700 pieces / year of the right modification. After the assessment of individual production options, the cutting technology in a progressing tool and bending technology in a simple tool were selected. Based on a literary study on cutting and bending, an optimal process of arm manufacturing was proposed. After the design, technological and control calculations for individual technologies, the tools were designed, and the technical documentation for those tools was developed. For the cutting technology, an Andritz Kaiser press with a PV120F / 1 labelling was selected. For the second production step, bending technology, a press from Šmeral Brno a.s. with a LEN 63 labelling was selected. Both of these presses meet the requirements of both the forming force and the tool dimensions. After the economy of production was assessed, production costs of one piece were determined with a 30 % profit assumed to 28.47 CZK. The turning point when production became profitable was found after the production of 18,121 units.
|