|
|
Design of supply network configuration for large engineering company
Němec, Jan ; Holoubek, Jiří (referee) ; Topolánek, David (advisor)
This master-thesis analyzes issues of suggestion configuration of power supply network of industrial business. The option of the scheme of the configuration, the voltage level, the way of compensation of the reactive power, the way of the suppretion of the energetic interference and other requirements is included in the main tasks. This option has to be convenient with the requirements of the industrial business. The important point of this proposal is to prevent the influence of the superordinate distribution network. The compensation which keeps the power factor in the prescribed limits is one of the precautions against the influencing of the network. The second precaution is the elimination of energetic interference. The higher voltage, the fluctuation and the asymmetry of the voltage are the interferences which have the biggest impact on the industrial networks. The master-thesis offers the summary of the possibilities and ways of the elimination of the basic elements of the energetic interference.
|
|
|
Reactive power compensation of electrothermal devices
Tomeš, Martin ; Paar, Martin (referee) ; Lázničková, Ilona (advisor)
The work deals with reactive-power compensation (power factor correction = PFC) in practice. The theoretical part describes the basic concepts of power factor correction, reasons for the PFC, and the ways of the PFC, eventually a sanction for a breach of rated power factor. Attention is given to basic partition of the PFC and compensation devices which are capacitors and detuning reactors. The practical part is focused on the PFC analysis for a concrete customer where the central compensation is projected. The practical part is also focused on a detuned power factor correction which is often used by reason of increases in number of nonlinear loads nowadays.
|
|
|
Reactive power compensation in Petrochemie company using a passive power factor correction system instead of synchronous generators
Martinák, Rostislav ; Žila, Drahoslav (referee) ; Drápela, Jiří (advisor)
This thesis deals with the reactive power compensation, namely the possibility of reactive power compensation in Petrochemie company using a passive power factor correction system instead of synchronous generators, as part of the contract Kompel company. The thesis analyzes problems of definition of power in circuits with sinusoidal and nonsinusoidal voltages and currents. Furthermore, this thesis describes the power factor correction systems used in the low and medium voltage industrial and distribution networks. The last four chapters contain description of the existing state of power plant in Petrochemie company. There are considered the possibility of use of existing power factor correction system owned by company. The new static power factor correction system is suggested and functionality of power factor correction systems is verified through the simulations.
|
|
|
Compensation of reactive power to avoid its overflow into the MV system
Jurák, Viktor ; Ptáček, Michal (referee) ; Orságová, Jaroslava (advisor)
This master thesis is focused on analysis of reactive power flow in LV and MV networks. In the first part there is a definition of reactive power and description of individual parts of electrical networks that contribute with their reactive power to distribution network. The second part is dedicated to calculation of power flow in simulation software PSS® Sincal where on numerical models of network different types of network configuration are tested and consequently its influence on reactive power flow is evaluated. A more detailed analysis is dedicated to reactive power compensation in networks with distributed generation equipped with Volt-Var regulation and its possible negative mutual influence. This thesis also includes general recommendation on the basis of network simulation analysis concerning installation of compensating systems in distribution transformer station.
|
|
|
Reactive Power Compensation of The Industrial Consumer
Hanzelka, Jiří ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This thesis is focused on reactive power compensation and it suggests new conceptions for industrial customers. The first part describes the basics of compensation, location and ways of compensation. In conclusion of this part it is a good example of parallel reactive power compensation. The second part deals with the design of reactive power compensation specifically for raw water pumping station. Compensation was solved both on a low voltage level and on the high voltage level. For drawings were used program EPLAN Electric P8.
|
|
|
Reconfiguration of an industrial distribution system including local power source integration
Benetka, Tomáš ; Holoubek, Jiří (referee) ; Drápela, Jiří (advisor)
This bachelor´s thesis deals with reconfiguration of industrial network that has been technologically reconstructed. The aim of this study is mostly to describe changes made on devices used for reactive power compensation and improving the power quality. Thesis is divided into two parts. Theoretical part of thesis deals with parameters used for judging power quality and causes of changes for these parameters, eventually with devices for its adjustment. Standard demands for these parameters are also included. Further, reactive power compensation, extract of reactive power appliance and their influence on power network is described in this thesis. In the second - practical - part devices used for reactive power compensation were reconstructed. This part is also focused on local energy source integration and usage of power electronic engineering products for power quality provision.
|
|
|
The reactive power compensation of the industrial consumer
Doseděl, Tomáš ; Martinák, Rostislav (referee) ; Toman, Petr (advisor)
This thesis is about reactive-power compensation used in real practise. In theoretical part, basic principles of reactive-power compensation are stated. Also, charges for breaching power factor and overview of individual compensation components are dealth with. Practical part is about the design of a low voltage compensator for industrial customer.Compensator uses central compensation with gradual switching.
|
|
|
The reactive power compensation of the industrial consumer
Pospíšil, Zdeněk ; Holoubek, Jiří (referee) ; Toman, Petr (advisor)
This bachelor thesis deals with the reactive power compensation. The reactive power compensation falls into an important measures reducing current load of electrical grids and other equipments, which increase its lifespan and decrease energy losses. The bachelor thesis is divided into a theoretical and a practical part. In the theoretical part is explained the theory necessary for good understanding of compensation, explained the sanctions and the additional fees for unsatisfactory power factor and summarized the impacts of compensation on the electrical network. Further is shown the basic classification of compensation by its place of connection, type of compensation device and regulation. The end of theoretical part is dedicated to the simple calculation of compensation. The practical part deals with the real design of the reactive power compensation for a particular industrial consumer.
|
|
|
Reactive power compensation systems
Lakomý, Marek ; Paar, Martin (referee) ; Drápela, Jiří (advisor)
Bachelor‘s thesis deals with the compensation of reactive power, which enables improved power factor correction. The theoretical part includes an explanation of basic concepts of the theory of reactive power compensation, the basic allocation of compensating equipment, their description and basic computational relations. Simulation of compensation devices, making laboratory models and measuring their parameters were realized as the practical part of the thesis.
|
|
|
Reactive power compensation of electrothermal devices
Tomeš, Martin ; Paar, Martin (referee) ; Lázničková, Ilona (advisor)
The work deals with reactive-power compensation (power factor correction = PFC) in practice. The theoretical part describes the basic concepts of power factor correction, reasons for the PFC, and the ways of the PFC, eventually a sanction for a breach of rated power factor. Attention is given to basic partition of the PFC and compensation devices which are capacitors and detuning reactors. The practical part is focused on the PFC analysis for a concrete customer where the central compensation is projected. The practical part is also focused on a detuned power factor correction which is often used by reason of increases in number of nonlinear loads nowadays.
|
guest ::
