|
|
Construction of gender identities in sports: Comparative study of yoga and MMA
Hoza, Matyáš ; Országhová, Kristína (advisor) ; Grygar, Jakub (referee)
In my work, I am researching strategies of gender identity construction in MMA and yoga. In the first part of work, the matter of masculinity construction, within the boundaries of yoga, is discussed. The most interesting concept shown is "second sport". In this concept masculine actors demean yoga as a sport and associate it with passivity. Strategies of construction are also researched with female fighters in MMA environment. In MMA the main concepts are fragile sex and intimacy. Female fighters show signs of refusal of violence. The creation of femininity and masculinity is then compared. The comparison is quite tricky, as the conditions are not the same for both genders. Masculine actors in yoga have no desire in practices of feminine gender, whereas female fighters need to practice femininity and masculinity. Even so, some correlations can be observed, for example the expression of gender through heteronormativity. In the second part of the work there are identified four models of masculinity, through which I am watching the evolution of manliness in martial arts sports. Masculinity models are working with the sense of dominance and aggression. For the creation of data, semi structured interviews and participant observation, were used.
|
|
| |
|
|
The production of domestic grill
Blahák, Radek ; Hála, Michal (referee) ; Kubíček, Jaroslav (advisor)
The work deals with the production of domestic grill from discarded storage pressure vessel domestic water of non-alloy steel grade 11 373. The work is divided into theoretical and experimental. The theoretical part is devoted to the study of the manual electrode welding, design appropriate welding parameters and selection of welding electrodes. Further work is focused on graphic design of the grill, under which it will produce grill. The practical part is devoted to verification of appropriate welding parameters for the selected electrode to the control samples, evaluation, and then use the most appropriate type of electrode and the welding parameters for the design of the grill.
|
|
|
Manufacturing of separation subrack for rolling stand.
Trčka, Libor ; Štyl, Pavel (referee) ; Daněk, Ladislav (advisor)
The project elaborated in terms of engineering studies concern with project of a manufactural process of separator weldment and of an economical analysis of a production calculated for one item of a weldment and one item of a casting. During elaboration this project there were used all obtainable norms and technical bibliography. In literery studies there are summarized important knowledges related to welding constructions, welding technology, heat treatment and checking fusion splices. There was choosed box construction for this separator weldment. That is designed of two types of material. First of materials S355J2G3, EN 10025 is used for structural parts and the second material S235JR, EN 10025 is used for stiffering pars. The propriety checking of this construction and used materials was performed by Finite Element Method. After calculating costs of production of both variants we can say, that the costs of production of one piece seperator weldment are considerably lower, than costs of production of one piece of casting.
|
|
|
Technological process of forging die repair
Kriegsmann, Luděk ; Vaněk, Mojmír (referee) ; Kubíček, Jaroslav (advisor)
The bachelor thesis presents a proposal and solution of renovation of forging insert, which is made of tool steel 1.2367. Due to the literature search, manual electric arc welding with coated electrode was chosen for renovation. The work deals with the stress of the forging insert, which was carried out by strength and thermal analysis. After performance of trial overlay by several coated electrodes, hardness measurement and calculation of dilution of materials was performed. Based on these results, electrode Capilla 66 was selected. Renovation of insert was performed according to preliminary technological process pWPS. The Insert was preheated to 300 °C. As a power source was used TransPocket 3500 and welding current was 190 A.
|
|
|
Gel polymer electrolytes with high fire safety
Musil, Michal ; Zatloukal, Miroslav (referee) ; Sedlaříková, Marie (advisor)
This work deals with preparation of PMMA based gel polymer electrolytes with high fire safety and high ionic conductivity. In the theoretical part of the work GPEs for Li – ion accumulators, fire safety tests, fire retardants are mentioned. Preparation of GPEs, electrical and other properties are described in the experimental part. Furthermore, new possible methods of gel preparation are discussed.
|
|
|
Battery-powered welding inverter
Starec, Stanislav ; Folprecht, Martin (referee) ; Vorel, Pavel (advisor)
This master thesis is focused on proposition and following implementation of DC arc welder. This paper is based on semester’s paper, where the first version was realized. The welder is powered by a battery pack with LiFePO4 type cells. Battery cells are protected by BMS circuits. The driving electronics controls the duty cycle step-down (buck) converter in a closed current or power regulation loop. The power regulator has been designed and validated by simulations. Switching power transistors, low side and high side, are implemented by optically isolated gate drivers. Charging the battery is solved by a switching flyback converter. For the charger and the welder is sheet metal construction made of aluminum sheet.
|
|
|
Gel polymer electrolytes with fire retardands
Veselkova, Iuliia ; Jahn, Michal (referee) ; Sedlaříková, Marie (advisor)
This graduate work deals with the study and preparation of gel polymer electrolytes with flame retardants for lithium-ion batteries. The theoretical part describes the types of electrolytes, their features, benefits, how they differ and where they are used in detail. The basis of this section is gel electrolytes with flame retardants, to measure their electrical and electrochemical properties. The experimental part deals with the preparation of samples of gel electrolytes with different percentages of flame retardant, where varied species of flame retardants and measuring their electrical conductivity and potential windows. Impedance spectroscopy, cyclic voltammetry and dynamic-analytical thermal analysis were selected as measuring methods.
|
|
|
Proposal of technological procedure for welding pressure vessel
Reich, Martin ; Sigmund, Marian (referee) ; Kubíček, Jaroslav (advisor)
The work presents a proposal for a suitable technology for the welding of the pressure vessel of the LPG gas phase separator. There are three different methods of welding of the separator body proposed and the economics of producing the separator for a given series of pieces is assessed. There is a comparison of hand electrode welding, MAG welding and TIG welding. Further, a brief overview of possible types of non-destructive testing is added and the three selected tests are properly executed and detailed. An overall evaluation of the experiments performed is included and the possible future development outlined.
|
|
| |
guest ::
