Národní úložiště šedé literatury Nalezeno 9 záznamů.  Hledání trvalo 0.00 vteřin. 
Micro-mechanical performance of concrete used as recycled raw material in cementitious composite
Hrbek, Vladimír ; Koudelková, Veronika ; Prošek, Z. ; Tesárek, P.
The reduction of industrial pollution is recently one of main goals over all fields. In civil engineering, re-cycling of structural waste provides wide opportunity contributing this effort. This paper focus on re-use of concrete waste, which after further processing can be used in new constructions as partial supplement to the mixture. To investigate the impact of re-cycled concrete addition, it is necessary to determine mechanical and structural parameters of individual phases in the “raw” material. For this purpose, grid indentation and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM, EDX) are combined to determine properties of concrete sample.
Influence of dispersed particles on utility properties od polyvinyl alcohol-based nanotextiles: macromechanical properties
Rácová, Z. ; Nežerka, V. ; Ryparová, Pavla ; Kromka, Alexander ; Tesárek, Pavel
The paper deals with the influence of different dispersed particles on utility properties of polyvinyl-alcohol (PVA) based nanofiber textiles. The purpose of the dispersed particles was to produce textiles of antibacterial character, and these were added into water-polymer solution, which was used for electrospinning in two various ways: in form of copper and silver ions, or in form of diamond nanoparticles. In order to assess the strength of textiles, macromechanical testing of modified PVA-based nanofiber textiles was carried out on samples with variable weight per area in range between 0.5 and 5 g/m(2). The obtained results were compared with the results of measurements on plain reference samples. The study revealed that the addition of silver ions causes the strength and stiffness reduction, the addition of copper ions has an opposite effect, while the diamond nanoparticles did not have any significant influence on the mechanical properties.\n
Verification of the use of pva based nanofiber textiles as a rehabilitation for the structures attack by wood decaying fungi
Rácová, Z. ; Ryparová, Pavla ; Wasserbauer, R. ; Nežerka, V. ; Tesárek, Pavel ; Demo, Pavel
The presented paper is focused on the investigation of antifungal properties of nanofiber PVA-based textiles with incorporated copper and silver ions. In particular, the ability to prevent the growth of Dry rot fungus (Serpula lacrymans) was studied in laboratory conditions. For that purpose, the Petri dishes with malt agar were inoculated with square cut-outs of seed stocks, consequently covered by the nanofiber textiles and kept in an incubator at 28 degrees C. The fungal growth had been monitored and recorded at regular intervals for 28 days. The comparison of the individual treatments (PVA, PVA + Ag, PVA + Cu, PVA + Ag + Cu) is finally discussed.\n
Algicidal properties nanofibrous fabrics doped by metals
Ryparová, Pavla ; Wasserbauer, R. ; Rácová, Z. ; Demo, Pavel ; Tesárek, Pavel
The paper presents a novel protection against algae by nanofiber fabrics doped with metal ions. Nanofiber textiles were prepared by electrospinning on the Nanospider LB 500 device, equipped with cylindrical electrodes of a length 600 mm and electrode distance about 140 mm. The produced nanofiber textiles had a specific weight between 2 and 4 g/m2. The entire surface was covered with algae commonly accompanied by bacteria. The sample had placed in the middle of circular dishes having the diameter 20 mm. The cultivation took place at light environment in common laboratory conditions. Algicidal effect was evaluated as the resulting halo size and quality around the sample. The PVA treated sample had not produce any halo effect, unlike the samples with the addition of metal salts (AgNO3, CuSO4 center dot 5H(2)O) that exhibited the halo effect dependent on the concentration the salts, usually ranging from 0.3-2 mm, giving the evidence about their algicidal properties.\n
Influence of incorporated nanodiamond particles on mechanical properties of composite material based on multi-layer PVA nanofiber textiles
Prošek, Zdeněk ; Indrová, K. ; Rácová, Z. ; Ryparová, Pavla ; Nežerka, V. ; Topič, J. ; Tesárek, Pavel ; Kromka, Alexander
The present study investigates the influence of NDP on mechanical properties of multi-layer PVA nanofiber textiles. The particles of a diameter equal to 5 nm were incorporated into double- and triple-layer textiles, while the single-layer samples were prepared as the reference. The diameter of PVA nanofibers varied from 100 to 300 nm. We characterized the tensile strength, stiffness and ductility of fabricated nanofibers by using a conventional method – a tensile test. We found that the NDP-enriched nanofibers reveal antibacterial character. However, none or negligible influence of NDP additions on the tested mechanical properties was observed.
Foreign substrates pre-treatment using polymer composites in plasma-enhanced CVD growth of diamond fibers and layers
Potocký, Štěpán ; Babchenko, Oleg ; Ižák, Tibor ; Varga, Marián ; Kromka, Alexander ; Rezek, Bohuslav ; Tesárek, P.
Nanocrystalline diamond wires and layers were grown by microwave plasma CVD technique on Si substrates. The substrates were pretreated by non-woven composite nanofiber textile composed by poly(vinyl alcohol) matrix and ultra-dispersed diamond (UDD) nanoparticles prepared by needleless electrospinning method. High concentration of UDD in the PVA fibers lead to formation of diamond wires due to a combined effect of UDD particles used as seeding and high pressure difference across the fibers interface. A preferable growth of diamond layers was observed on areas with a low porosity volume of nanofiber textile. The influence of spundond structure on the growth of diamond decreased with lowering of UDD concentra-tion in the primary polymer matrix.
Analysis of the processes and tools of campaign responses evaluation
Hlaváčková, Lýdia ; Novotný, Ota (vedoucí práce) ; Tesárek, Petr (oponent)
Tato práce je specializovaná na analýzu reakcí klientů banky na marketingové kampaně. Za účelem takové studie jsou z pohledu informačních systémů esenciální systémy pro řízení vztahů se zákazníky, tedy CRM systémy, a to i jejich operační část, se kterou pracují všichni zaměstnanci, i analytická sloužící na agregaci a využívání informací operační části na rozhodování. Pro správné porozumění business logiky těchto systémů se práce zabývá také oblastí přímého marketingu, který je objektem CRM kampaní. Z teoretického hlediska je pro vyhodnocování kampaňových reakcí klientů vhodné zabývat se také Customer Intelligence a jeho vybranými tématy. V práci jako případová studie posloužila konkrétní situace v bance působící na českém trhu, která v současnosti pracuje na zavedení nového CRM systému Siebel. Situace v bance i na projektu má dynamický charakter. Cílem práce je zjistit a konkrétně nastínit jak CRM systém podporuje vyhodnocování marketingových kampaní důležité pro podporu rozhodování o produktech nabízených klientům a o volbě vhodné komunikace. Také je poznamenáno jaké jsou další možnosti rozvoje těchto analytických nástrojů.
Rezervy jako projev zásady opatrnosti
Tesárek, Petr ; Randáková, Monika (vedoucí práce)
Tato práce se zaměřuje na problematiku rezerv v mezinárodní právní úpravě a české legislativě. Zabývá se zásadou opatrnosti a jejím hlavním projevem - rezervami.

Viz též: podobná jména autorů
1 Tesárek, Pavel
1 Tesárek, Petr
Chcete být upozorněni, pokud se objeví nové záznamy odpovídající tomuto dotazu?
Přihlásit se k odběru RSS.