National Repository of Grey Literature 37 records found  1 - 10nextend  jump to record: Search took 0.00 seconds. 
Establishment of agroforestry systems on agricultural land
Krčmářová, Jana ; Szabó, Péter ; Kala, Lukáš ; Doležalová, H. ; Snášelová, M. ; Králík, T. ; Jobbiková, J. ; Vávrová, K. ; Weger, J. ; Ehrenbergerová, L. ; Martiník, A. ; Chládová, A. ; Kotrba, R. ; Houška, J. ; Lojka, B.
The current intensive and industrial agriculture in the Czech Republic has many nega-tive impacts on the environment. Agroforestry, i.e. growing trees on agricultural land while maintaining agricultural production, can minimize these negative effects. Tree species grown in agroforestry systems (AFS) fulfil a productive function and at the same time provide important ecosystem services. The aim of this methodology is to define agroforestry, characterize individual types of AFS and estimate their extent in the Czech Republic. The aim is to provide background materials on the basis of which it is possible to establish agroforestry systems on agricultural land. The result is a clear definition, classification and characterization of different AFS in Czechia. Furthermore, their extension is estimated, and their historical roots explained. The methodology of establishment of AFS proposes a suitable design, list of suitable of woody species and describes the procedure of correct tree planting and management. An important part of the methodology is the analysis of the legislative environment for tree planting on agri-cultural land, economic evaluation of AFS and also the selection of suitable subsidy titles for such establishment. Last but not least, the methodology summarizes the existing capacity building and education in agroforestry in the Czech Republic.
SMV-2020-53: Thermal radiation of gold plated surfaces for low temperature applications
Králík, Tomáš
The goal of this experimental study was evaluation of the thermal radiation rate by a surface of an alloy coated with a thin layer of gold. The alloy without gold coating would have of about five time higher rate of the emission or absorption of the thermal radiation. Higher thermal emission makes the thermal control of the parts of space or cryogenics apparatuses more difficult. The contractor has coated three samples of the alloy with gold by various processes. Two other coated samples were cleaned by an industrial cleaning process.\nThe emission of the thermal radiation from the surface of the samples was experimentally evaluated in the range of the sample temperatures from 20 K to 320 K compared to the black body at the same temperature. The results of the study enable to routinely produce parts for satellites or cryogenics with guaranteed thermal emissivity.\n
Zhodnocení stavu Knínického potoka z hlediska znečištění fosforečnany
Králík, Tomáš
This bachelor thesis Condition assessment of the stream Knínický potok in terms of phosphate pollution occupies with monitoring of water pollution in the stream Knínický potok which was carried out from April 2015 to march 2017. The monitored factors were total phosphorus, phosphates, pH, conductivity, dissolved oxygen and tempera-ture. The theoretical part outlines the problematics of different water types, water pollution especially phosphorus pollution and the related legislation. The practical part describes the profiles selected for water sampling, methodology of both fieldwork and laboratory work and also the characteristics of the area. The essential part are the measurement results with commentary, evaluated and compared to the provision of government 401/2015 Sb, in an effective version and to the ČSN 75 7221. According to the results, the main source of pollution is water drained from the wastewater treatment plant. Parameter with the worst measured results was total nitrogen, which has reached extremely high above the NEK limit.
SMV-2019-10: Characterisation of Cu alloys at low temperatures
Králík, Tomáš
The goal of the project was to measure the electrical conductivity of eight samples made of pure or alloyed copper at the temperatures 4.2 K, 77 K and 300 K for the as received, annealed and hardened state. The electrical conductivity is correlated with the thermal conductivity and the ratio between electrical conductivity at 300 K and 4.2 K (RRR value) gives the purity of the metal including mechanical defects in the material. Pure copper is excellent conductor of heat and electric current but it does not have required strength properties compared to the alloyed coppers. The measured temperature dependence of the electrical conductivity enables to compare the copper materials and to choose one with optimal properties for the current leads of the fusion reactor. \nThe samples with a cross section 0.15-0.3 mm^2 and length 33-70 mm were cut by slow milling. One of the samples of each material was annealed at 980°C for 1.5 hour and the second was hardened at 480°C for 5 hours. All samples (24 pcs) were soldered with Indium solder on a special holder with contacts for the four wire electric resistance measurement. The electrical resistance was measured by a AC resistance bridge Lake Shore 372.\n
SMV-2019-09: New materials for cryogenics
Králík, Tomáš
The aim of the study was evaluation of the emission of thermal radiation emitted from a set of five commercially available foils which thermal radiative properties unknown till now. These materials are used for insulations of low temperature devices for medicine, industry or space exploration. The emissivity of the materials was measured at conditions truly simulating its operational environment. The measurement was done in a dedicated apparatus cooled with liquid helium. The emissivity of the sample was measured in vacuum at temperatures in the range from 20 K to 300 K.
SMV-2019-76: Maintenance and commissioning of liquid nitrogen Dewar vessel
Králík, Tomáš
The contractor needs a handy storage of liquid nitrogen for some analytical apparatuses in his laboratory. The contractor decided to utilize an older LN2 Dewar vessel with unknown state of its insulation and evaporation rate. A professional commissioning of a Dewar vessel need special know how and specialised equipment. It was done cleaning of the pumping valve of the vessel from old and hardened sealing grease, change of the O-ring sealing, visual check of the insulation inside the vessel, application of new silicone grease on the pumping valve plug, pumping out of the vacuum space and its outgassing, leak test with a helium leak detector, closing of the pumping valve and its filling with silicon grease, cool down and filling with the liquid nitrogen, long term measurement of the evaporation rate. The measured evaporation rate is 0.3 litres per day and the time of the cold state of the Dewar vessel is nearly hundred days.
SMV-2018-23: Experimental estimation of the influence of the contamination on thermal radiative properties of adhesive tapes for cryogenic applications
Králík, Tomáš
The goal of this research cooperation, was to estimate an influence of possible contamination of the outer side of aluminium adhesive tapes on its thermal radiative properties in the temperature range from 10 K to 300 K. The aluminium adhesive tapes are commonly used for joining of multilayer insulations, for covering of spots with high emission or absorption of thermal radiation or holes in radiation shields. They are also used for fixation of electric wires. As low as possible emission or absorption of thermal radiation of the tapes is one of the important requirements. This fulfils only clean metallic surfaces. There are two types of adhesive tapes used in the industry. The first type has a special treatment of the outer side so the adhesive do not visibly stick on the outer side after unwinding of the tape. The second type has a lining made of silicon paper, which covers the adhesive side of the tape and protect the outer side. The lining is removed just before the application of the tape.\nThe tapes and an aluminium foil laminated on a PET foil were applied on copper plates suitable for special apparatus Emister developed at ISI Brno. The absorption of thermal radiation by the sample was measured in this apparatus. The source of the thermal radiation was a black reference sample with temperature in the range from 10 K to 300 K. The temperature of the sample of the tape in the range from 5 K to 33 K. The vacuum in the cryogenic part of the apparatus is kept by cryopumping so the parasitic heat transfer by the residual gas is negligible. \nThe conditions in the apparatus are very similar to those in common cryogenic devices and they enable to gain thermal absorptivity of the tapes and very precise comparison of the samples.\n
SMV-2017-26: Upgrade of the apparatus Spaceman – capacitive system for the measurement of the sample thickness
Králík, Tomáš
The goal of this research cooperation, which is follow- up of the previous cooperation, was an upgrade of the apparatus Spaceman. The upgrade enables to obtain new data of the spacers used in the multilayer insulations. The spacer can be woven or non-woven textile made of glass, plastic or natural fibres. The apparatus Spaceman measures heat flow through a sample of the spacer in the range from 10 K to 290 K in vacuum. The temperature drop on the sample is typically 5 K. The apparatus was enhanced by a system for measurement of the in-situ sample thickness from evaluation of the electrical capacity between electrically conductive contact surfaces. The upgrade was done by particular disassembling of the apparatus, modification or exchange of some parts, welding of a new vacuum feed trough in the apparatus lid, development and installation of a new electronic in the vacuum space. The electronic is placed in the upper part of the apparatus at room temperature and the electrical capacitance is measured by a special cryogenic coaxial cable. The electronic is able to cancel a parasitic capacitance of the cable. Some modifications were done on the Labview control software developed for the apparatus. The apparatus now enables to measure not only the thermal conductivity at various temperatures and loads but also changes of the sample thickness due to thermal dilatations and loads. It is also possible to evaluate an elastic behaviour of the sample at temperatures from 10 K to 290 K.
Effect of thermal radiation on low temperature measurement for various types of temperature sensor installations
Urban, Pavel ; Hanzelka, Pavel ; Králík, Tomáš ; Vlček, Ivan ; Srnka, Aleš
We investigated an effect of thermal radiation (300 K) on precision of low temperature measurement of a sample holder (or sample) in an UHV SEM/SPM microscope working at range down to 20 K for various ways of temperature sensor mounting. We designed a special copper casing for installation of Lake Shore\ntemperature sensors (CernoxTM and Si diodes) encapsulated in SD packages. The sensor body is attached direct to the casing using indium solder. The current leads pertaining to the sensor are thermally anchored but electrically insulated from the casing. Quality of sensors installation in the casing was tested for various ways of mounting on a cooled plate. Insufficient thermal anchoring of electrical wires and thermal shielding were imitated. Comparative measurement was also performed with sensors in SD package mounted without\ncasing. The experiments proved that our special design of temperature sensors casing is adequate for intended application of temperature measurement of sample holder in UHV SEM/SPM microscope. In contrary, measurement precision of unprotected sensors was absolutely unsuitable.

National Repository of Grey Literature : 37 records found   1 - 10nextend  jump to record:
See also: similar author names
28 Králik, Tomáš
28 Králík, Tomáš
Interested in being notified about new results for this query?
Subscribe to the RSS feed.