National Repository of Grey Literature 29 records found  1 - 10nextend  jump to record: Search took 0.01 seconds. 
"Multifunctional House Na Skřivánku in Chotěboř"
Janáček, Jiří ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
The main task of the diploma thesis is the elaboration of a project for the construction of a polyfunctional building Na Skřivánek in Chotěboř. The multifunctional house has one underground and 4 aboveground floors. On the underground floor there are premises serving as technical and storage facilities, on the ground floor there is designed two offices - general practitioner and pediatrician in the central part of the floor plan. In one of the outer tracts of the building there is a business area, designed for the operation of a travel agency. There is an apartment for barrier-free use on the ground floor. On the upper floors there is a total of 8 other apartment units ranging from 2 + kk to 2 atypical maisonettes in 3rd-4th floor. Each apartment unit, in addition to the barrier-free, is equipped with a balcony or terrace located on the south side. The basement part of the building is built of concrete slabs of lost formwork, the above-ground wall part of the Porotherm brick system is heat-insulated with a contact insulation system. Ceiling structures are made of pre-stressed Spiroll ceiling panels and filigree panels with superconducting. The roofing of the building is solved by a combination of a flat roof with a vegetation block with extensive green and saddle roofs with a continuous concealed dormer whose supporting function is provided by a wooden purlin roof truss.
Technological phase of the upper structure of the Čechovka appartment house
Janáček, Jiří ; Nečasová, Barbora (referee) ; Venkrbec, Václav (advisor)
The main task of the bachelor thesis is to prepare the construction and technological preparation of the construction of a residential building in Hlinsko in Bohemia. The work contains the accompanying and summary technical report, the situation of the construction with wider transport relations, the reports for the proposed stages. Further, they contain the technical regulations, the technical report of the construction site equipment, the time schedule including the staff balance, the design of the machine assemblies, the control and test plans and the safety and health protection at work. Furthermore, a comparison of 2 variants of ceiling structures, thermal-technical assessment of the roof structure, calculation of snow load on the roof structure is elaborated. Another part of the annexes is the coordinate drawing of the situation, the drawing of the building site equipment, the support structure of the ceilings and the transport relations around the construction site.
"Multifunctional House Na Skřivánku in Chotěboř"
Janáček, Jiří ; Procházka, Jiří (referee) ; Sobotka, Jindřich (advisor)
The main task of the diploma thesis is the elaboration of a project for the construction of a polyfunctional building Na Skřivánek in Chotěboř. The multifunctional house has one underground and 4 aboveground floors. On the underground floor there are premises serving as technical and storage facilities, on the ground floor there is designed two offices - general practitioner and pediatrician in the central part of the floor plan. In one of the outer tracts of the building there is a business area, designed for the operation of a travel agency. There is an apartment for barrier-free use on the ground floor. On the upper floors there is a total of 8 other apartment units ranging from 2 + kk to 2 atypical maisonettes in 3rd-4th floor. Each apartment unit, in addition to the barrier-free, is equipped with a balcony or terrace located on the south side. The basement part of the building is built of concrete slabs of lost formwork, the above-ground wall part of the Porotherm brick system is heat-insulated with a contact insulation system. Ceiling structures are made of pre-stressed Spiroll ceiling panels and filigree panels with superconducting. The roofing of the building is solved by a combination of a flat roof with a vegetation block with extensive green and saddle roofs with a continuous concealed dormer whose supporting function is provided by a wooden purlin roof truss.
Technological phase of the upper structure of the Čechovka appartment house
Janáček, Jiří ; Nečasová, Barbora (referee) ; Venkrbec, Václav (advisor)
The main task of the bachelor thesis is to prepare the construction and technological preparation of the construction of a residential building in Hlinsko in Bohemia. The work contains the accompanying and summary technical report, the situation of the construction with wider transport relations, the reports for the proposed stages. Further, they contain the technical regulations, the technical report of the construction site equipment, the time schedule including the staff balance, the design of the machine assemblies, the control and test plans and the safety and health protection at work. Furthermore, a comparison of 2 variants of ceiling structures, thermal-technical assessment of the roof structure, calculation of snow load on the roof structure is elaborated. Another part of the annexes is the coordinate drawing of the situation, the drawing of the building site equipment, the support structure of the ceilings and the transport relations around the construction site.
Random marked sets and dimension reduction
Šedivý, Ondřej ; Beneš, Viktor (advisor) ; Janáček, Jiří (referee) ; Mrkvička, Tomáš (referee)
Random closed sets and random marked closed sets present an important general concept for the description of random objects appearing in a topological space, particularly in the Euclidean space. This thesis deals with two major tasks. At first, it is the dimension reduction problem where dependence of a random closed set on underlying spatial variables is studied. Solving this problem allows to find the most significant regressors or, possibly, to identify the redundant ones. This work achieves both theoretical results, based on extending the inverse regression techniques from classical to spatial statistics, and numerical justification of the methods via simulation studies. The second topic is estimation of characteristics of random marked closed sets which is primarily motivated by an application in the microstructural research. Random marked closed sets present a mathematical model for the description of ultrafine-grained microstructures of metals. Methods for statistical estimation of their selected characteristics are developed in the thesis. Correct quantitative characterization of microstructure of metals allows to better understand their macroscopic properties.
Elastic registration of biomedical images on CUDA-Supported graphics procesor units
Michálek, Jan ; Čapek, Martin ; Janáček, Jiří ; Kubínová, Lucie
Elastic registration is a task of finding the matching of two images, using geometric and elastic transformations, so that objects in images have the same size, position and orientation. We apply elastic registration in the framework of volume reconstruction, where an object acquired from parallel physical sections is composed and mutual positions of the sections including deformations caused by their cutting have to be found. The method lies in optimizing a functional consisting of two parts: first, discrete total variation as a measure of roughness and, second, L1 norm as a measure of dissimilarity of images. As a parallelizable optimization strategy we apply a potential-based equivalent transformation of a (max,+)-labelling problem. CUDA-based implementation of the described elastic registration algorithm is reasonably fast, requires seconds to minutes of calculations, provides good results and, thus, can be used for practical tasks dealing with alignment of biomedical images
Fitting geometrical models to 3D confocal microscopy images using graph cuts iteratively
Janáček, Jiří
A new iterative method for fitting triangulated surfaces and geometric graphs to surfaces and fibre-like structures is based on the calculation of the minimal graph cut in every iteration. The method was used for improvement of the geometric model of muscle fibres surfaces and capillaries in skeletal muscle from 3D confocal image

National Repository of Grey Literature : 29 records found   1 - 10nextend  jump to record:
Interested in being notified about new results for this query?
Subscribe to the RSS feed.