|
|
Optimalization of Technological Properties of Cement Sand Mixtures
Burianová, Klára ; Jelínek, Petr (referee) ; Tegel, Michal (referee) ; Rusín, Karel (advisor)
The work deals with optimization of the technological properties of cement-sand mixtures. The main objective is to find the correct mixture of the individual components which contribute to the rapid solidification of the mixture, hence shorter dismantling. The content is also of a method of measuring and recording during the plasticity of the mixture. Also assessment of the velocity of hydration heat cement mixture in the initial stage of the solidification process in the course of the strength properties of the mixture. To assess these phenomena was used calorimetric method used for measuring hydration heat cement mixture. Further measurements plasticity mixtures and mechanical and physical methods for measuring the compressive strength with the help of a measuring instrument LRU-D.
|
|
|
Interaction Core - Melt by Casting of Cylinder Heads from Al Alloys in Semi-Permanent Moulds
Hlavsa, Petr ; Roučka, Jaromír (referee) ; Tegel, Michal (referee) ; Rusín, Karel (advisor)
This dissertation thesis deals with interactions on the interface core - melt by casting of cylinder heads from Al alloys in semi-permanent moulds and solves a specific problem with sticky sand after decoring of a diesel cylinder head casting. It describes in detail the process of core production using the Cold-Box method and process of casting using the progressive technology Rotacast. It theoretically analyses the reaction on the interface core-melt and presents a classification of surface defects by Al castings produced by gravity casting into semi-permanent moulds. It also states the results of technological tests of binders, core mixtures and cores (Cogas analysis). By solution of a problem with sticky sand in intake and exhaust ports of diesel cylinder head casting is used methodology for problem solving DMAIC. All experimental tests are solved in laboratory and production conditions of an international company dealing with casting of cylinder heads from Al alloys in semi-permanent moulds.
|
|
|
Optimalization of Technological Properties of Cement Sand Mixtures
Burianová, Klára ; Jelínek, Petr (referee) ; Tegel, Michal (referee) ; Rusín, Karel (advisor)
The work deals with optimization of the technological properties of cement-sand mixtures. The main objective is to find the correct mixture of the individual components which contribute to the rapid solidification of the mixture, hence shorter dismantling. The content is also of a method of measuring and recording during the plasticity of the mixture. Also assessment of the velocity of hydration heat cement mixture in the initial stage of the solidification process in the course of the strength properties of the mixture. To assess these phenomena was used calorimetric method used for measuring hydration heat cement mixture. Further measurements plasticity mixtures and mechanical and physical methods for measuring the compressive strength with the help of a measuring instrument LRU-D.
|
|
|
Interaction Core - Melt by Casting of Cylinder Heads from Al Alloys in Semi-Permanent Moulds
Hlavsa, Petr ; Roučka, Jaromír (referee) ; Tegel, Michal (referee) ; Rusín, Karel (advisor)
This dissertation thesis deals with interactions on the interface core - melt by casting of cylinder heads from Al alloys in semi-permanent moulds and solves a specific problem with sticky sand after decoring of a diesel cylinder head casting. It describes in detail the process of core production using the Cold-Box method and process of casting using the progressive technology Rotacast. It theoretically analyses the reaction on the interface core-melt and presents a classification of surface defects by Al castings produced by gravity casting into semi-permanent moulds. It also states the results of technological tests of binders, core mixtures and cores (Cogas analysis). By solution of a problem with sticky sand in intake and exhaust ports of diesel cylinder head casting is used methodology for problem solving DMAIC. All experimental tests are solved in laboratory and production conditions of an international company dealing with casting of cylinder heads from Al alloys in semi-permanent moulds.
|
guest ::
