|
|
Strength point connections in the soft and hard mode welding
Steiner, Jaromír ; Kubíček, Jaroslav (referee) ; Kandus, Bohumil (advisor)
Spot welding of 1.4307 material of 1+1 mm thickness is tuned out excellently by the enterprise ROSTEX – at the changes only of the welding current it was managed to approach the value of thickness achieved by enterprise ROSTEX. At the welding of 1.4307 material of 2+2 mm thickness it was managed to achieve more strength under welding parameters: Fs = 5500N, Is = 8,964 kA, ts = 10 Per. Spot welding of 1.0330 material revealed a possibility in proceeding with welding current increasing which could stand for the weld strength increasing (not necessarily) – a limit where material could splash was not achieved. The soft mode welding is not convenient for up-to date spot welding because the material is extremely affected by heat at the long welding time, it also leads to huge thermal losses, thermal effect and distortion of electrodes (electrodes life diminishing). Soft mode welding is not expedient even economically. In accordance with economic comparison, see chart 27, page 64 – for instance welding of 1.4307 material with 1+1 mm thickness at 1000 welds there is difference of 644 Czech crowns between the hard and the soft mode welding in benefit to the hard mode.
|
|
|
Cutting components with higher accuracy to size
Steiner, Jaromír ; Varjan, Matúš (referee) ; Žák, Ladislav (advisor)
The main topic of this thesis is the fineblanking technology with a vee-ring which was chosen as the most suitable solution. The aim is a design and an assessment of technologicity of the selected component, a draft of the structural design of the tool and an economic evalua-tion of the project. The chain wheel has been designed from structural steel 11500; parameters have been evaluated as appropriate. The instrument has been designed as two-station progressive tool for single-row layout of the fineblanked parts with a moving punch; the vee-ring is positioned both to the blanking plate and to the vee-ring plate. The press was chosen on the basis of the calculated shearing force by Feintool Company. At the selected batch 500,000 units, 5.1 CZK per fineblanket part has been calculated.
|
|
|
Strength point connections in the soft and hard mode welding
Steiner, Jaromír ; Kubíček, Jaroslav (referee) ; Kandus, Bohumil (advisor)
Spot welding of 1.4307 material of 1+1 mm thickness is tuned out excellently by the enterprise ROSTEX – at the changes only of the welding current it was managed to approach the value of thickness achieved by enterprise ROSTEX. At the welding of 1.4307 material of 2+2 mm thickness it was managed to achieve more strength under welding parameters: Fs = 5500N, Is = 8,964 kA, ts = 10 Per. Spot welding of 1.0330 material revealed a possibility in proceeding with welding current increasing which could stand for the weld strength increasing (not necessarily) – a limit where material could splash was not achieved. The soft mode welding is not convenient for up-to date spot welding because the material is extremely affected by heat at the long welding time, it also leads to huge thermal losses, thermal effect and distortion of electrodes (electrodes life diminishing). Soft mode welding is not expedient even economically. In accordance with economic comparison, see chart 27, page 64 – for instance welding of 1.4307 material with 1+1 mm thickness at 1000 welds there is difference of 644 Czech crowns between the hard and the soft mode welding in benefit to the hard mode.
|
|
|
Cutting components with higher accuracy to size
Steiner, Jaromír ; Varjan, Matúš (referee) ; Žák, Ladislav (advisor)
The main topic of this thesis is the fineblanking technology with a vee-ring which was chosen as the most suitable solution. The aim is a design and an assessment of technologicity of the selected component, a draft of the structural design of the tool and an economic evalua-tion of the project. The chain wheel has been designed from structural steel 11500; parameters have been evaluated as appropriate. The instrument has been designed as two-station progressive tool for single-row layout of the fineblanked parts with a moving punch; the vee-ring is positioned both to the blanking plate and to the vee-ring plate. The press was chosen on the basis of the calculated shearing force by Feintool Company. At the selected batch 500,000 units, 5.1 CZK per fineblanket part has been calculated.
|
guest ::
RSS feed.