|
| |
|
|
Magnetic field mesurement on electrical machines
Manduch, Viliam ; Skalka, Miroslav (referee) ; Mikulčík, Aleš (advisor)
This bachelor thesis deals with magnetic field and the principles on which sensors for it´s measuring are based on. The following part of the bachelor work investigates the distibution of magnetic field in the environs of asynchronous engine. Analysis is evaluated with the assistance of graphical processing of measured values and a part of the analysis is also the comparison of this values with the values calculated with assistence of the method of final compoments in program FEMM.
|
|
|
Combustion Engine Ignition and Fuel Injection Control (Motormanagement)
Škrabal, Martin ; Mikulčík, Aleš (referee) ; Hájek, Vítězslav (advisor)
Undoubtedly the most important and absolutely essential electrical systems located in vehicles which are powered by internal combustion spark-ignition engine is the ignition system of the engine. Without this the engine, or the whole vehicle can not operate properly. Since the beginning of spark ignition engines ignition system executing a complex and long term development effort driven by the best function of the engine. Unlike the ignition, which had to work from the outset the development of spark ignition engines has been to introduce more to the use of injection in the 70 the 20th century. From simple control systems, ignition and injection on the mechanical principle of working out the development of electronic management units. In most modern combustion engines is the management of the ignition and injection is carried out using a common system with one central control unit. Most of this type of system-Motronic system from Bosch-used today in different variations large number of producers cars. In history was the main objective of the management system to achieve the highest possible power, now coming oil crisis be brought to the forefront of the fuel consumption and the implementation of emission standards (in the Czech Republic EURO standards).
|
|
|
Electrical machine thermal protection
Němec, Martin ; Huzlík, Rostislav (referee) ; Mikulčík, Aleš (advisor)
This bachelor´s thesis deals with proposal for thermal protection of single-phase motor. The single part of thesis is devoted to collocation of motor temperature. Knowing this issue is important for thermistor right location. The parameters measuring and the model of simulated scheme are described in following parts. The simulated scheme is created in the Matlab programme, in a programme´s superstructure Simulink. At the close of this thesis, there are values measured and simulated compared.
|
|
|
Utilization of SolidWorks at power electrical engineering
Fazekas, Tamás ; Mikulčík, Aleš (referee) ; Veselka, František (advisor)
The purpose of the bachelor thesis was to became familiar with parametric CAD systems and create a simple model in high power electronics branch. The first part of the project summarizes the most known CAD systems. The second part deals with a specifics software:SolidWorks 2008. Finally, a simple model has been created in Solidworks 2008 from the power electronics branch. It is a model of an electric machine which is suitable for the research of the sliding contact.
|
|
|
Photocell as a power source for a small DC motor of RC car model
Nábělek, Ondřej ; Huzlík, Rostislav (referee) ; Mikulčík, Aleš (advisor)
The goal of this project is to acquaint the reader with problems of solar cells and project of systems for solar cells power a small electric machine performance. Preliminary discussion of the energy produced by the Sun incident on the Earth. Another chapter contains information about the fundamental function of solar silicon cells and conversion of solar energy to electric energy. Main part of this work is devoted to various types of solar cells, production materials, the structure of cells and solar panel. The last part is a measurement system for solar cells, the verification of theoretical assumptions and evaluate the results of the work.
|
|
|
Electric and Hybrid Vehicles
Kosík, Jaroslav ; Mikulčík, Aleš (referee) ; Hájek, Vítězslav (advisor)
This bachelor`s thesis is specialized on obtaining basic piece of electric and hybrid vehicles and their development. The first part of the work deals with electrical vehicles, their history and the possible development of these vehicles can take. In the next section is an example use of electric vehicles in the practical traffic. It is stated these vehicles compared with vehicles using the type of propulsion, such as cars with combustion engines or hybrid vehicles. At the end of chapter is supplemented by specific examples of photographic electrical vehicles. The third part of the work deals with the expected development of electric and hybrid vehicles. There is also a description of hybrid vehicles, and their comparisions with other vehicles using the drive as well as other examples of hybrid vehicles.
|
|
|
Comfort and Safety
Ševčík, Pavel ; Mikulčík, Aleš (referee) ; Hájek, Vítězslav (advisor)
This bachelor’s thesis considers by safety and comfort systems in motor vehicles. Is concentrate to safety systems for example seat belts and tighteners, airbags and their separations and about direct units for activation safety systems. Next about system of active head rest and about safety transport of children in cars. Deal with comfort systems and shortly discuss about trend of safety systems. The last part of bachelor’s thesis considers of analyse and experimental measurement of dump sensor. Function of accelerometer ADXL150 is described and the practical measurement is made with including evaluation of measured results.
|
|
|
Temperature measurement on electrical machines
Prezbruchý, Martin ; Skalka, Miroslav (referee) ; Mikulčík, Aleš (advisor)
This work is trying do describe the temperature allocation on the electric machines. In the first part it is describing the temperature measurment, principals of measuring, thermocouples and a contactless measurment. In the second part, it is theoretically proceeding with engine types and a heat generation on them. In the third part, the work is describing simulation in the programs Autodesk Inventor and Ansys Workbench. In the next part, a work is showing the creation of a elektric machine model in already mentioned programs and a practical measurements of temerature allocation in the laboratory. In the conclusion, it is evaluating the measurment achievements and comparing the results of both used metods.
|
|
|
Temperature measurement on electrical machines
Prezbruchý, Martin ; Skalka, Miroslav (referee) ; Mikulčík, Aleš (advisor)
This work is trying do describe the temperature allocation on the electric machines. In the first part it is describing the temperature measurment, principals of measuring, thermocouples and a contactless measurment. In the second part, it is theoretically proceeding with engine types and a heat generation on them. In the third part, the work is describing simulation in the programs Autodesk Inventor and Ansys Workbench. In the next part, a work is showing the creation of a elektric machine model in already mentioned programs and a practical measurements of temerature allocation in the laboratory. In the conclusion, it is evaluating the measurment achievements and comparing the results of both used metods.
|
guest ::
