National Repository of Grey Literature 6 records found  Search took 0.01 seconds. 
Evaluation of Lighting Quality Using Modern Software Tools
Fazekas, Tibor ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
This thesis deals with the evaluation of the quality of lighting with the usage of the latest software products used nowadays. The first part of the work is about indoor lighting, the basic requirements invested in lighting, and the basic concepts of indoor lighting. The second part includes complete search for today's computer implements for projecting, simulating, calculation and analysis of light, their functions and characteristics, including luminance analyzers based on CCD sensors and their software equipment. The last part of the work has the task to model a computer room using softwares which can be found within the territory of VUT Brno, and the task was to assess its lighting. Following this, with the help of luminance analyzer, the task is to capture the scene under different lighting conditions and to evaluate the measured data.
Systems of protection and remote control of medium voltage substation with using protection with communication Profibus and IEC61850
Tesařík, Jan ; Fazekaš, Tibor (referee) ; Huzlík, Rostislav (advisor)
This Diploma thesis deals with the system for protection and remote control for MV switchgear by using protection relays with communication protocols PROFIBUS and IEC61850. The first part represents a theoretical introduction to points at issue. In the first part, the reader will get conceived with the communication standard IEC61850 and its typical architecture for MV switchgear, and also with data model based on this standard. Second part discusses the PROFIBUS communication protocol. In this part, the reader can acquire information about transmit technology and communication protocol for PROFIBUS. Last part of this theoretical chapter contains an overview on the MODBUS communication. The second part deals with the description of protection relays, which were used for the purposes of this thesis. In the first subchapter, the reader can learn about the REM620 from ABB Company, its configuration and cooperation with IEC61850 standard. Second subchapter describes the HMS Anybus communication converter. The reader will get further knowledge about description of this device and how to configure the communication protocols. In last subchapter, a description of protection relay SIPROTEC 7SJ64 produced by Siemens company is explained. With the third part starts the practical work within this thesis with protection relays. This chapter is divided into two parts; each describes different system with using the protection relays. First system contains ABB REM620 relay and HMS Anybus converter. By converting MODBUS protocol with the Anybus converter, the REM620 can be connected to PROFIBUS network. This part includes the configuration of REM620 and Anybus converter, the engineering of MODBUS and PROFIBUS protocols and testing various signals in those networks. The second system contains Siemens SIPROTEC 7SJ64 and ethernet switch. This subchapter deals with the preparation of configuration for SIPROTEC 7SJ64 and the engineering for IEC61850 communication. This part finishes with the comparing of both systems on the engineering bases. The last part of this thesis is about working with the LabVIEW instrument. Within this part, the software emulation of protection relay was made. The program offers to the user the possibility of setting input parameters as the effective values of current and voltage, the frequency and the current phase shift. Also the user can set the thresholds for protection functions, such as the Overcurrent, the Voltage and the Frequency protection. As last one, the Phase unbalance protection for the current phases is present.
Idea design of experimental model for LV electric arc properties investigation
Fazekas, Tibor ; Valenta, Jiří (referee) ; Vávra, Zdeněk (advisor)
The aim of the work was a planing of an experimental model for the observation of the low voltage electric arc. The opening part observes the basics of the electric network switching and the electric arc in theory. The next point is definition about the behaviour of the electric arc in the low voltage switching devices, focusing on the movement of the arc along electrodes and in the extinguish chamber. The design of the experimental model, created in Autodesk Inventor 2008, is described in the last part of the work.
Idea design of experimental model for LV electric arc properties investigation
Fazekas, Tibor ; Valenta, Jiří (referee) ; Vávra, Zdeněk (advisor)
The aim of the work was a planing of an experimental model for the observation of the low voltage electric arc. The opening part observes the basics of the electric network switching and the electric arc in theory. The next point is definition about the behaviour of the electric arc in the low voltage switching devices, focusing on the movement of the arc along electrodes and in the extinguish chamber. The design of the experimental model, created in Autodesk Inventor 2008, is described in the last part of the work.
Systems of protection and remote control of medium voltage substation with using protection with communication Profibus and IEC61850
Tesařík, Jan ; Fazekaš, Tibor (referee) ; Huzlík, Rostislav (advisor)
This Diploma thesis deals with the system for protection and remote control for MV switchgear by using protection relays with communication protocols PROFIBUS and IEC61850. The first part represents a theoretical introduction to points at issue. In the first part, the reader will get conceived with the communication standard IEC61850 and its typical architecture for MV switchgear, and also with data model based on this standard. Second part discusses the PROFIBUS communication protocol. In this part, the reader can acquire information about transmit technology and communication protocol for PROFIBUS. Last part of this theoretical chapter contains an overview on the MODBUS communication. The second part deals with the description of protection relays, which were used for the purposes of this thesis. In the first subchapter, the reader can learn about the REM620 from ABB Company, its configuration and cooperation with IEC61850 standard. Second subchapter describes the HMS Anybus communication converter. The reader will get further knowledge about description of this device and how to configure the communication protocols. In last subchapter, a description of protection relay SIPROTEC 7SJ64 produced by Siemens company is explained. With the third part starts the practical work within this thesis with protection relays. This chapter is divided into two parts; each describes different system with using the protection relays. First system contains ABB REM620 relay and HMS Anybus converter. By converting MODBUS protocol with the Anybus converter, the REM620 can be connected to PROFIBUS network. This part includes the configuration of REM620 and Anybus converter, the engineering of MODBUS and PROFIBUS protocols and testing various signals in those networks. The second system contains Siemens SIPROTEC 7SJ64 and ethernet switch. This subchapter deals with the preparation of configuration for SIPROTEC 7SJ64 and the engineering for IEC61850 communication. This part finishes with the comparing of both systems on the engineering bases. The last part of this thesis is about working with the LabVIEW instrument. Within this part, the software emulation of protection relay was made. The program offers to the user the possibility of setting input parameters as the effective values of current and voltage, the frequency and the current phase shift. Also the user can set the thresholds for protection functions, such as the Overcurrent, the Voltage and the Frequency protection. As last one, the Phase unbalance protection for the current phases is present.
Evaluation of Lighting Quality Using Modern Software Tools
Fazekas, Tibor ; Škoda, Jan (referee) ; Baxant, Petr (advisor)
This thesis deals with the evaluation of the quality of lighting with the usage of the latest software products used nowadays. The first part of the work is about indoor lighting, the basic requirements invested in lighting, and the basic concepts of indoor lighting. The second part includes complete search for today's computer implements for projecting, simulating, calculation and analysis of light, their functions and characteristics, including luminance analyzers based on CCD sensors and their software equipment. The last part of the work has the task to model a computer room using softwares which can be found within the territory of VUT Brno, and the task was to assess its lighting. Following this, with the help of luminance analyzer, the task is to capture the scene under different lighting conditions and to evaluate the measured data.

See also: similar author names
4 Fazekas, Tamás
4 Fazekas, Tibor
Interested in being notified about new results for this query?
Subscribe to the RSS feed.