|
|
Production technology of plastic lamp shade
Čajan, Tomáš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This master thesis deals with design of injection molding technology for plastic lamp shade made of polycarbonate labelled Lexan 925. The injection is performed into injection mold with hot runner system. Initially there is a general study related to plastic materials and injection molding technology. Further the study continues with technological solution of production of the lamp shade. The designed injection mold is two-plate, double cavity mold with two hot nozzles and is equipped with a thread-unscrewing machine. This thesis contains part of the documentation and item list of the injection mold, along with technical-economical evaluation of the developed solution.
|
|
|
Design of manufacturing technology for plastic cogwheel
Vyhnanovský, Jaroslav ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This project has been developed within the master study of Engineering Technology and Industrial Management a design of manufacturing technology for plastic cogwheel is introduced. The cogwheel will be produced by plastic injection moulding. POM material with a trade name Delrin 100 NC010 from DuPont Company will be used. An injection mould is a tool for producing a plastic cogwheel using injection moulding technology. Production will take place on the machine Allrounder 420 C Golden Edition 1000-290 from Arburg German Company headquartered in Loßburg, where the seat of parent company is situated.
|
|
|
Optimization of technological parameters of injection plastic parts
Ulrich, Josef ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis describes the optimalization of technological parameters during commissioning of injection mold manufacturing. In the introduction, there is general literary studies of plastics, injection molds, injection holding machine, injection holding technology and their effect on quality. The practical part includes an analysis of current state, calculation of injection parameters, moldflow analysis and sampling on the machine. Finally, there is choice of optimal injection holding parameters, design of workplace and technical-economic evaluation.
|
|
| |
|
|
Design of manufacturing technology for plastic base timer
Březina, Vít ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This master´s thesis addresses the design of technology manufacturing plastic parts. The first part deals with the study of theoretical properties of plastics and processing applicable to a given problem. In the second part is designed double injection mold with hot runners. The following authentication function by analyzing the injection solution and the work concludes technical and economic assessment of the project.
|
|
|
Optimization of production technology for plastic cap tube
Majerčíková, Erika ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis deals with the optimization of the production technology of the cap tube made by injection molding. Series production is set at 5 000 000 units per year; the minimum time of the production is 5 years. A literary study is developed, focusing on the technology of injection molding in molds including the possibilities of the optimization of the production by changing the structure of the mold. The practical part of the thesis is devoted to the optimization of existing mold with cold runner system for the production of the cap tube, using the hot runner system supplied by Synventive. The change of the structure of the mold involves changing the three plate mold to a two plate mold. It is about changing the fixed part of the mold in which the hot runner system is placed; it is composed of standards parts of the company HASCO. Based on the technological parameters the injection machine Krauss Maffei KM 80-380 CX is chosen. There is a technical-economical evaluation of the optimization of the production by using the hot runner system at the end of the thesis.
|
|
|
Design of manufacturing technology for plastic cover electrical device
Kočárek, Karel ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis contains of theoretical part which deals with injection molding, properties of some polymer materials are included also. Design of plastic injection mold for cover of electronic device is presented in practical part. Manufacturing parameters and injection machine selection are specified with mold structure consideration. Production costs and the final price of the plastic part are calculated in economical evaluation.
|
|
|
Production technology of plastic body aperture
Dluhoš, Jan ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis deals with the production of a plastic body of the aperture by the method of injection moulding. The work includes a design of the injection mould for the given component. First, an appropriate material for the moulded piece was chosen and then the necessary calculations for the injection mould were made. A quadruplex injection mould with a heated inlet nozzle and pullout cores was designed based on these calculations. Modular components were chosen when designing the injection mould. The next part of the thesis contains the selection of the injection moulding machine for the given mould. The conclusion contains a technical-economical evaluation including the cost estimating for the injection mould and cost estimating for one moulded piece.
|
|
|
Design of manufacturing technology for plastic program disc
Gráf, Radomír ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis is concerned with the appropriate design of manufacturing technology for plastic program disc including the design of plastic printing technology. At the beginning of this thesis was made an analysis of requirements for manufactured device including selection of the most appropriate technology for its manufacturing – plastic injection. In the theoretical part are described all skills needed for designing and construction of the injection mould. Partial theoretical parts are concerned with the issue of plastic materials, tools and engines for injection, and of plastic printing technology. Practical part is concerned with description of design of each single system inside the injection mould including calculation. On the basis of these calculations was selected the appropriate injection engine. The end of the practical part is concerned with the selection of the appropriate engine for printing on the plastic device which is manufactured by the technology of plastic injection. For construction of the injection mould were applied normalities of the Hasco Company and the 3D CAD system Solidworks. The conclusion of this thesis achieves the technical- economical evaluation for manufacturing of designed plastic device.
|
|
|
Design of manufacturing technology for plastic lever
Stránský, Luboš ; Kebrle, Ondřej (referee) ; Kandus, Bohumil (advisor)
This thesis describes the design of injection form for production of plastic lever. In the introduction,there is general literary studies of plastics and injection molding technology. Then continues studies of the injection molding machine, injection form or by selecting the gating systém. The practical part is injection mold design which includes a calculation of the injectionparameters, selection of equipment and technical and economic evaluation.
|
guest ::
