|
|
Present-day Programming Method of Microcontroller
Medla, Eduard ; Matyáš, Pavel (referee) ; Zuth, Daniel (advisor)
This bachelor thesis is dedicated to modern methods of programming microcontrollers. In this work are examined some programming languages, various programming environments and graphic editors. In every methods of programming are explained their advantages and disadvantages. Here are two examined methods of loading program to microcontroller, so called flashing. Choosed method is programming language C, which was used to programme two-state regulator with hysteresis in environment AVR Studio 6.2.
|
|
|
3D scanning methods
Čermák, Jan ; Matyáš, Pavel (referee) ; Marada, Tomáš (advisor)
In the first part of this thesis there is a task of taxonomy of the 3D scanners. It explains some principles of the 3D scanners functioning. Then in the second part there are described two particular technologies of the 3D scanning in the more complex way. In the chapters of both of these methods there is described procedure of scanning and compared several commercially available sensors. In the end there is comparison of these two methods.
|
|
|
Microbrewery automation
Širůček, Pavel ; Matyáš, Pavel (referee) ; Marada, Tomáš (advisor)
Thesis discusses the basics of brewing technology, ingredients needed for beer production, homemade microbreweries, basic procedures and principles used in those breweries and their application. It also discusses the specific solution of selected microbrewery, its design, assembly and automation, including a description of the control software. Selected microbrewery consists of three containers, uses gas burner for heating and transfer pump for pumping. Programmable automatic PLC LOGO! program serves as a control unit of the microbrewery.
|
|
|
Use 8x8 LED Matrix and MEMS Sensor for Promotional Purposes
Středa, Jakub ; Matyáš, Pavel (referee) ; Zuth, Daniel (advisor)
The main objective of this bachelor thesis is to create exemplary application for promotional purposes. It means using of a microcontroller ATmega32A, a MEMS acceleration and angular velocity sensor and a LED matrix with a driver.. In the theoretical part the thesis is focused on the characteristics of used components, their features and way of control. Subsequently, the thesis deals with a power supply, design and manufacture of a printed circuit board for microcontroller and the last part of the thesis is focused on a microcontroller's software and manufacture of a casing.
|
|
|
RFID acces system realization
Buchal, Adam ; Matyáš, Pavel (referee) ; Marada, Tomáš (advisor)
This bachelor thesis deals with the use of RFID technology in access control systems in intelligent buildings. The study also describes the principle functions of RFID readers and the list of frequencies at which the technology works. The next section is dedicated to the design of the access system with iClass R10 operating at a frequency of 13.56 MHz, the whole system is controlled by a microprocessor ATmega8. The board design is described program for creating electronic schematics EAGLE. The try-out functionality and basic programming functions used kit EVB 4.3 The last section describes the procedure for the production of printed circuit boards photo path including drawings and schemes and also describes the program controlling the entire device using the block diagram.
|
|
| |
|
|
Wireless temperature measurement prepared food
Pospíšil, Jiří ; Matyáš, Pavel (referee) ; Zuth, Daniel (advisor)
The goals of this bachelor's thesis are temperature measurment, data elaboration and wireless data transfer. Theoretical part introduces basic properties and functions of microcontroller and wireless communication. In practial part of this bachelor's thesis is solved temperature measurment task by construction of holow needle with digital sensor inside. Data elaboration is done by A/D converter in ATmega8 – L microcontroller. Wireless data tranfer was done by Bluetooth technology. For the purposes of immediate temperature control was included seven segment LED display. Part of realisation was to design printed circuit board and prototype assembly.
|
|
|
TeachRobot control design and realization
Dohnal, Jakub ; Matyáš, Pavel (referee) ; Marada, Tomáš (advisor)
This thesis deals with the management model of industrial manipulator using a microcontroller. The first part deals with the theoretical basis. The second part deals with the description of the model TeachRobot. The third part describes the design and implementation of the control electronics. The last part consists of a description of software microcontroller.
|
|
|
Possibilities for Financing of Activities in the Construction Company
Veselý, Daniel ; Matyáš, Pavel (referee) ; Hroníková, Marta (advisor)
This thesis summarizes the options that are offered in the financing of corporate activities. The theoretical part examines the individual sources of finance, factors affecting financing, outlines the information that can be obtained from a financial analysis and mentions financial planning as a tool for future ideas for funding. The practical part describes the real construction company and the way it uses in terms of financing their activities. Financial analysis of the company serves as the basis for consideration alternative options.
|
guest ::
RSS feed.