|
|
Negative lead-acid battery electrode for hybrid electric vehicles
Dvořáček, Daniel ; Křivík, Petr (referee) ; Bača, Petr (advisor)
The thesis briefly discusses the issue of electrochemical power sources, especially with a focus on lead-acid batteries operating in modes that are typical of hybrid electric vehicles. The theoretical part of the thesis should be a good basis for the subsequent practical part, in which several experimental electrodes and their parameters will be performed and evaluated. The output of the practical part will be conclusions regarding the influence of different variants of modified carbon used as an additive in the active material of the negative electrode on the capacity and life of cells
|
|
|
Observation of lead electrode surface by atomic force microscope AFM
Bouška, Marek ; Máca, Josef (referee) ; Bača, Petr (advisor)
This master's thesis is focused on in situ observation of the negative electrode of the lead acid accumulator using atomic force microscopy AFM. Discussed topics are lead acid accumulator, atomic force microscopy, cyclic voltammetry and current knowledge of the in situ observation of the lead acid accumulator using AFM. The main task of this project is assembling the experimental cells, make in situ observation of the negative electrode surface of the lead acid accumulator. In the end evaluate if this method is suitable for the lead acid battery observation.
|
|
|
Health effects of ionizing and non-ionizing radiation
Gottvald, Martin ; Neoral, Jiří (referee) ; Bača, Petr (advisor)
This diploma thesis deals with electromagnetic radiation in its frequency spectrum. It also divides radiation into ionizing and non-ionizing. The principle of its effects and possible health problems from radiation exposure are also described. Hygienic limits – the maximum allowable and reference values of non-ionizing radiation are analysed too. The thesis should prove that the things of everyday need do not threaten the lives of human beings and are in compliance with the regulation No. 1/2008 Sb. on Health Protection Against Non-Ionizing Radiation. Measurement of low-frequency part is carried out with the cooperation of The National Institute of Public Health. Measurement of high-frequency part was carried out in 3 flats. The aim of this measurement was to find out the change of power density with the moving in a flat and the influence of the barriers (in this case walls).
|
|
|
Investigation causes of the premature capacity loss in accumulator for hybrid electric vehicles
Vystrčil, Marek ; Bilko, Radek (referee) ; Bača, Petr (advisor)
This thesis describes the results of two successive experiments. The first was focused on the influence of impurities in the active mass of negative electrode in PSoC (Partial State of Charge) mode, which simulates the conditions occurring in HEV (hybrid electric vehicle). In the second experiment, cells with the same additives were exposed to optimum downforce 4N/cm2, by which we wanted to prove the influence of pressure on life of VRLA (Valve Regulated Lead Acid) cells working in operating HEV conditions.
|
|
|
Negative lead electrode for hybrid electric vehicles
Opravil, Petr ; Zimáková, Jana (referee) ; Bača, Petr (advisor)
This bachelors thesis is focusing on degradational proceses occurring in electrodes of lead-acid batteries working in parcial state of charge used in hybrid electric vehicles. Studied topics include storage of electrical energy, hybrid powertrains and lead-acid accumulators. Experimental cells have been made and were later used in experiments maintaining partial state of charge. This work is focused on finding a link between silanized glass fibres added to the electrodes and lowering the amount of degradation of cells.
|
|
|
Monitoring of temperature influence on properties of lead-acid accumulators
Musil, Petr ; Křivík, Petr (referee) ; Bača, Petr (advisor)
This thesis deals with lead-acid battery, its parameters and temperature behaviour of this electro-chemical source of power. In the theory section, types of batteries are presented, followed by their primary parameters and electro-chemical reactions, which take part in battery cells. This section also contains information about charging stages, detailed description of each battery part, used materials, construction of the battery and degradation processes caused by battery operation. The practictal section of this thesis offers a measurement scheme for automated measuring workstation. Furthermore, the practical section presents results of measurements on parameters of chosen lead-acid battery types, it also contains long-term deep battery cycling and measurements under elevated temperatures. Detailed comparison of measurements results and datasheet values is included. Conclusion sums up parameters of chosen lead-acid battery types and their feasibility for further usage in power backuping.
|
|
|
The use of ceramics in the positive active mass of lead-acid batteries
Bureš, Michal ; Zimáková, Jana (referee) ; Bača, Petr (advisor)
Premature loss of capacity, mode of partial charge, additives, negative electrode, lead acid battery, lead-acid battery cycling, hybrid electric vehicle, traction battery, ebonex, titanium dioxide
|
|
|
Temperature changes during pulse charging of lead-acid accumulator
Přikryl, Kamil ; Bača, Petr (referee) ; Křivík, Petr (advisor)
This master's thesis deals with the issue of lead-acid batteries, their charging methods and issue of thermal processes in lead-acid batteries. The thesis is divided into three main parts. The first section describes the theoretical knowledge of lead-acid batteries, such as history of lead-acid battery, structure, principle of operation, methods of charging and thermal processes taking place in the lead-acid battery. The second part describes in detail the production of experimental electrodes. The last section describes the automatic data logger for measuring and experiments, which were focused on pulse charging method with variable duty cycle pulses.
|
|
|
Modification properties of MnOx based positive electrode for AFC
Kamrla, David ; Bača, Petr (referee) ; Novák, Vítězslav (advisor)
The subject of this graduation thesis is low-cost alkaline power cells and especially electrodes with alternative catalyst made of MnOx + dopant. The thesis expands the bachelor´s thesis [1] and previous research [4] [12] [13] [14]. Volt-ampere characteristics and power characteristics of the katodes for AFC, subsidized with various dopants, are the outcome of this project. The project presents the optimalisation of preparation process of AFC electrodes. The aim is to prepair several electrodes with identical construction, which varies only with the type of the dopant.
|
|
|
Exploring the influence of pressure on the life of lead acid batteries for hybrid electric vehicles
Pospíchal, Martin ; Tošer, Pavel (referee) ; Bača, Petr (advisor)
The lead-acid batteries used in hybrid electronic vehicles HEV operate in high-rate mode in a state of partial charge PSoC. It occurs when the degradation mechanisms related to irreversible sulphation and negative electrodes are a limiting factor in the life of lead-acid batteries. The electrode system was applied to experimental pressure cells of different sizes. Exp. cells were subjected to measurement and evaluation of potential negative electrode, a negative active mass resistance, contact resistance of transition collector - the active mass with the evaluation and measurement of pressure fluctuations within four PSoC runs.
|
guest ::
RSS feed.