National Repository of Grey Literature 228 records found  beginprevious209 - 218next  jump to record: Search took 0.00 seconds. 
Reinforced concrete frame of office building
Osyková, Martina ; Šulák, Pavel (referee) ; Laníková, Ivana (advisor)
The bachelor thesis ,,Reinforced concrete frame of office building” deals with designing of selected elements of RC frame structure. Discussed elements are consist of beamed ceiling slab, beam, girder and frame column. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces was carried out with usage of the program Scia Engineer. 3D model of the whole object was created. The output accuracy was verified with help of 2D frame model, which was solved in the same program. Review of the results of the internal forces were carried out with help of manual calculation using the method of frame segments. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the girder.
Reinforced concrete structure of an office buildings
Přikryl, Martin ; Šimůnek, Petr (referee) ; Šulák, Pavel (advisor)
The bachelor project is focused on the design of monolithic reinforced concrete ceiling slab of typical floor of an administrative building. Calculation of internal forces is carried out in a computer software SCIA Engineer with manual verification using the simplifield method. Assessment is done according to Eurocode 2 (ČSN EN 1992-1-1).
Design of selected parts of RC and masonry structures
Neužil, David ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design selected part of reinforced concrete and brick construction on building of wine cellar and elaboration of reinforcemenet drawings of selected structural element. Building is decided to two parts entrance building and wine cellar. At the entrance are designed and assessed reinforced concrete perimeter walls, columns and beam which is situated on columns. In the cellar was assessed ceiling formed by a brick vault which failed to report and was designed rehabilitation using reinforced concrete reverse shell. Calculation of internal forces was performed by computer program SCIA Engineer.
Reinforced concrete structure of a multistoried garage
Klajba, Daniel ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
The aim of bachelors’s thesis is to design monolithic reinforced concrete ceiling structure of a typical storey of a multistoried garage. The supporting structure consists of a frame consisting of rungs, which are stored by beams and slab. Rungs are supported by columns. Reactions of the structure are transmitted to the foundation soil by footings. The design was made according to standard ČSN EN 1992-1-1 for ultimate limit state. Structural analysis was performed using Scia Engineer 2012 – Student version. The results were validated by simplyfied manual method. Structure was modeled using Scia Engineer 2012 also in 3D together with second option of ceiling structure – locally supported plate. Comparison between these two variants was made.
Design of waste water tank
Konečný, Vlastimil ; Šulák, Pavel (referee) ; Švaříčková, Ivana (advisor)
Aim of the bachelor's thesis is to design reinforcement for waste water tank. Another part of task is to do examine for limit state of cracks. Tank is examined for Capacity limit state and Applicability limit state - Limit state of cracks. To determine the effects of internal forces is used calculation software Scia Engineer 2011.1. Calculation is performed by two methods. The first method is to assign subsoil with manual calculation and the second one is to assign subsoil layers with module Soilin which generates loads and another parameters. Outputs from the methods of calculation were used for comparison of results and design reinforcement for Capacity limit state and Applicability limit state. According to Applicability limit state – Limit state of cracks is prescribed limitation of cracks width to limit width wk = 0,2 mm by EC 1992-1-1.
Reinforced concrete structure of a multifunction building
Marková, Anna ; Buřič, Pavel (referee) ; Šulák, Pavel (advisor)
The aim of this qualification thesis is to design a reinforced concrete monolithic ceiling construction of typical floor. It concerns locally supported panel that is 250 mm thick and of irregular shape. The spread of the span is 6 x 6 m with the overshoot of 1,2 m. Inside the building there is a staircase with a lift and a plumbing stack that is surrounded by the monolithic reinforced concrete wall that is 300 mm thick. The structural height of the floor is 3500 mm. The pillars` cross-sections are 450/450 mm. An analysis using the end-element method, a static design and a drawing documentation of the ceiling panel were conducted within this thesis.
Reinforced concrete structure of an office buildings
Zralý, Tomáš ; Laníková, Ivana (referee) ; Šulák, Pavel (advisor)
The work is designed reinforced concrete slab. This is a typical floor of office building. The slab was calculated using the finite element method, computer program SCIA Engineer. The work includes: calculation using the program SCIA Engineer and its comparison with the simplified method, the design of reinforced slab, drawings form and reinforcement slab.
Reinforced concrete structure of a multifunction building
Lyčka, Lukáš ; Švaříčková, Ivana (referee) ; Šulák, Pavel (advisor)
This bachelors thesis is about designing reinforcement for monolithic concrete skeleton construction of the polyfuncional building. The model was created by software SCIA ENGINEER 2012. Designed and reviewed elements of the construction are beams, collumn, footings and locally supported concrete slab.
Reinforced concrete aeration tank
Vlach, Jakub ; Strnad, Jiří (referee) ; Šulák, Pavel (advisor)
The aim of this work is to design and static analysis features open embedded aeration tank wastewater treatment plants, in particular the assessment base plate and exterior walls. On the basis of reports is prepared drawings consisting of reinforcement drawings and drawing shapes. The proposal was made on the values of the internal forces of the outputs of computer program SCIA Engineer 2012-Student Edition.
Reinforced concrete structure of a department store
Kovalíková, Mária ; Kostiha, Vojtěch (referee) ; Šulák, Pavel (advisor)
This thesis handles the design and assessment of reinforced concrete slabs store, especially the bending and punching, discusses the design cantilever beam. Input values of internal forces based on the calculation of Scia Engineer 2012 - Student version and are verified by summation of moments.

National Repository of Grey Literature : 228 records found   beginprevious209 - 218next  jump to record:
See also: similar author names
4 Šulák, Petr
Interested in being notified about new results for this query?
Subscribe to the RSS feed.