|
|
Optimalisation of coposite materials for civil engineering
Kazda, Tomáš ; Chladil, Ladislav (referee) ; Novák, Vítězslav (advisor)
This work is focused on optimalisation of coposite materials for civil engineering. In the theoretical part of the project is introduction of the composite materials and materials which are used for their production. There are also concerned their properties and possible application areas. In conclusion of theoretical part this project is a summary of the possible use of composite materials. The practical part compares the characteristics of the different types of composites made in terms of conductivity and the rate of corrosion.
|
|
|
Carbon materials for power sources
Tichý, Jiří ; Bača, Petr (referee) ; Novák, Vítězslav (advisor)
This work deals with carbon materials and using them in electrochemical energy sources. Object of this work was to prepare carbon materials and investigate their electrical properties. The theoretical part objects of the carbon materials, their properties, application in electrochemical energy sources and measurement methods used in experimental part. Experimental part describes the preparation of the electrodes with various carbon materials and summarizes the results of measurements.
|
|
|
New electrode structures for alkaline accumulators
Fusek, Petr ; Novák, Vítězslav (referee) ; Vrbický, Jiří (advisor)
Master´s thesis is focused on development of electrodes used in alcaline accumulators, by using new kinds of materials and compounds. Basic possitive eletrode was made of nickel, on this electrode were applied new layers of Ni(OH)2 by using the method called electrodeposition. For electrodeposition was used solution with Ni(NO3)2 in diverse concentrations. Later on, this material was enriched with aluminium admixtures to increase stability of alfa modification in Ni(OH)2. These concentrations were measured and analysed in diagrams. For measurement was used device Biologic. The diagrams were commented with recommendations for production use in accumulators.
|
|
|
Using lead-acid accumulators in hybrid electric vehicle regime
Hejdiš, Roman ; Novák, Vítězslav (referee) ; Bača, Petr (advisor)
The master´s thesis discuss characteristics of hybrid electric vehicles and lead-acid accumulators applied in car industry. It compares classic and alternative drive in cars, descibes classification of hybrid drives and its characteristics. Further work disscus lead-acid accumulators which focuses on VRLA accumulators applied in hybrid electric cars. Practical part contains a construction description of negative electrode and experiment, which studied influence of various amount addition of carbon on attributes of these electrodes.
|
|
|
Study of manganeese oxides properties by the EQCM method
Pléha, David ; Špičák, Petr (referee) ; Novák, Vítězslav (advisor)
The present work deals with the use of manganese oxide as a catalyst for positive electrode of fuel cells. The theoretical part is to analyze the problem of fuel cells, focusing on lowtemperature fuel cells. Are discussed and the methods of measurement and evaluation of properties of manganese oxide layer. The practical part deals with doping electrolytic manganese dioxide salts of divalent metals and monitoring their behavior in the cyclic voltammetry by the EQCM method.
|
|
|
Catalysts for positive electrode of hydrogen-oxygen fuel cell
Kováč, Martin ; Bača, Petr (referee) ; Novák, Vítězslav (advisor)
Master's thesis deals with new methods of preparing catalytic materials for positive electrode of an oxygen-hydrogen fuel cell and the influence of potassium permanganate or doping agent molar mass change on theirs attributes. Further it studies the use of proper measuring methods designed to qualify theirs attributes and the presentation of achieved results. In particular methods of linear sweep and cyclic voltammetry and the processing of data using Koutecky-Levich and Tafel plot and wave log analysis. Values of half-wave and onset potential and kinetic coefficient have been measured and calculated.
|
|
|
Optimalization of MEA structure for low temperature fuel cells
Chladil, Ladislav ; Novák, Vítězslav (referee) ; Barath, Peter (advisor)
This master’s thesis focuses on optimization of electrode configuration in combination with a polymer membrane (MEA - Membrane Electrode Assembly) in terms of material and technology. The main goal was to create a functional measurement of MEA structures with three different types of carbon materials. The theoretical part focuses on the physical and chemical properties of low-temperature fuel cells with polymer membrane. The experimental section describes the manufacture of catalytic materials with different types of carbon and various contents platinum. Produced by electrode materials were investigated by cyclic voltammetry. The next step was to manufacture MEA structures and characteristics of VA measurement using a digitally controlled load in the experimental fuel cell Quintech.
|
|
|
Investigation size effect of negative active mass additive on service life lead-acid accumulator.
Mikoláš, Jiří ; Novák, Vítězslav (referee) ; Bača, Petr (advisor)
The task of research work is to study new mechanisms and to minimize disturbance of lead batteries for hybrid electric vehicles. Those arising under the PSoC (Partial State of Charge) and is linked to irreversible sulphation mainly negative electrodes. As one solution to prevent sulphation of the negative electrode appears to be the active ingredients in a negative matter. In the investigated electrodes is verified the influence of carbon, titanium dioxide and silica on the grain size of the order of nanometers.
|
|
|
Simulation of dielectric materials absorption characteristics
Bačkovský, Pavel ; Novák, Vítězslav (referee) ; Křivík, Petr (advisor)
This projects deal with dielectric materials. Characterize definition of dielectric and polarization of dielectric. Shows dielectric relaxation. Specified conception dielectric absorption and interpreted them with DC voltage charging condensator. However, this thesis be engaged in simulation of this process. Output is simulation program of dielectric absorption characteristics for two relaxation mechanism.
|
|
|
Study of electrical and dielectric properties of thin polymer films
Miklíková, Zdeňka ; Novák, Vítězslav (referee) ; Zmeškal, Oldřich (advisor)
The thesis is focused on the study of electric and dielectric properties of thin-film organic materials that can be used as an active layer of photovoltaic cells. Primarily were studied the properties of the layers on the glass substrate, which consist of a thin active layer of mixture ZnPc/PCBM with Al or Au contact. On the selected samples were first measured current-voltage characteristics in the dark and during the exposure then on the selected samples were measured frequency dependences (impedance spectra) in the dark and finally on the selected samples were measured relaxation characteristics (transient response analysis – current dependences on time at constant voltage) in the dark. The measured data for transient measurement were evaluated using the methods of fractal analysis in HarFA. The results will be used to optimize the properties of photovoltaic cells.
|
guest ::
RSS feed.